Recommended Hitch for a 2023 Toyota Camry
Question:
Hello, I am looking for a hitch for my 2023 Toyota Camry.
asked by: Manny
Expert Reply:
To add a hitch to your 2023 Toyota Camry, I recommend the Curt Trailer Hitch item # C11576. This hitch is custom fit and bolts to your Camry with included hardware. This hitch is confirmed to fit all models of the 2023 Camry including the hybrid. This is a class I hitch with a 1-1/4" receiver. There are no class III hitches available.
I really like the Curt Hitch because the crosstube mounts behind your rear bumper. This not only helps with ground clearance because all you will be able to see is the 1-1/4" receiver. I have attached a couple of pictures below along with an installation video so you can see the final product.
If you are planning on towing you will also need a wiring harness item # C59236 or item # 118763 for a hybrid and the Draw-Tite Drawbar item # 3593 and then for hitch balls item # 19258 for a 2 inch ball or item # 19256 for a 1-7/8 inch ball.
(click to enlarge)
(click to enlarge)
Products Referenced in This Question
T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- Powered Converter
- Custom Fit
- 4 Flat
- Tekonsha
more information >
1-7/8" Hitch Ball - 3/4" Diameter x 1-9/16" Long Shank - Chrome - 2,000 lbs
- Trailer Hitch Ball
- Trailer Hitch Ball
- Standard Ball
- Chrome-Plated Steel
- 1-7/8 Inch Diameter Ball
- 1-9/16 Inch Shank Length
- 3/4 Inch Diameter Shank
- 2000 lbs GTW
- Class I
- Class II
- Draw-Tite
more information >
2" Hitch Ball - 3/4" Diameter x 1-9/16" Long Shank - Chrome - 3,500 lbs
- Trailer Hitch Ball
- Trailer Hitch Ball
- Standard Ball
- Chrome-Plated Steel
- 2 Inch Diameter Ball
- 1-9/16 Inch Shank Length
- 3/4 Inch Diameter Shank
- 3500 lbs GTW
- Class I
- Class II
- Draw-Tite
more information >
Draw-Tite Drawbar for 1-1/4" Hitch - 2-1/8" Rise, 2-3/4" Drop - 6-5/8" Long - 2K
- Trailer Hitch Ball Mount
- Fixed Ball Mount
- No Ball
- 3/4 Inch Ball Hole Diameter
- Steel Shank - Gloss Black
- Drop - 3 Inch
- Rise - 2 Inch
- Fits 1-1/4 Inch Hitch
- 2000 lbs GTW
- Class I
- Draw-Tite
more information >
Curt Powered Tail Light Converter with 4-Pole Flat Trailer Connector
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- Converter
- Universal Fit
- 4 Flat
- CURT
more information >
Product Page this Question was Asked From
Curt Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4"
- Trailer Hitch
- Custom Fit Hitch
- Class I
- 200 lbs TW
- 2000 lbs GTW
- 1-1/4 Inch Hitch
- CURT
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Shop: Trailer Hitch
- Q&A: Replacement Hub Recommendation for Dexter Hub 8-250
- Article: How to Choose the Right Trailer Hitch Class
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: Rooftop Cargo Carriers
- Q&A: 10k Dexter Replacement Hub for a 8-415
- Q&A: Replacement Double Lip Grease Seals for Boat Trailer Grease Seal # 171255UC
- Q&A: Is the Aluminum A-Frame Trailer Tongue Toolbox 350970 Waterproof
- Q&A: Seal With Dimensions to Replace 171255UC
- Q&A: Mounting the Aluminum A-Frame Trailer Tongue Toolbox to the A-Frame of The Trailer
- Q&A: Distance From Hitch Pin Hole to Gusset on Curt Ball Mount C45112
- Article: Trailer Wiring Diagrams
- Article: My Trailer Hitch Doesn't Fit
- Article: 2023 Best Gifts for Haulers & Towers
- Article: Where to Position the Trailer Axle?