For your 2020 Chevy Camaro the trailer hitch wiring kit I would recommend is the Zero Contact ZCI kit part # 119250KIT. While all of the wiring harnesses for your vehicle are universal style that require tapping into the taillight circuits of the vehicle this one uses sensors instead of splices so you don't have to cut into the vehicle wiring at all. view full answer...
The CTS3 Tuner # EP49YR will need to be connected to your 2019 Camaro SS the whole time. It'll hook into your wiring harness and tune the ECU. It's going to increase your HP but the performance will differ with the different tunes. It has preset tunes based on what you've done to your engine. As you bolt on upgrades like exhaust systems # MF19265 you can set a mild tune all the way up to high performance tunes. It all depends on what you're wanting.
It is more of a generic tune compared... view full answer...
To install the Diversi-Tech Replacement Locking Cylinders, # DTLBM02RK, on a locking Diversi-Tech ball mount, the opening to get to the set screw is located under the warning label that is on the top of the hitch.
I called the supplier (Diversi-Tech) and they recommended when installing the replacement locks to first put some air tool oil in the hole where the set screw is located and let set for awhile. This will help break up the threadlock that secures the set screw in the ballmount.... view full answer...
In order to install and use trailer wiring with your 2010 Chevy Camaro and tow a trailer that has amber turn signals separate from the brake lights you will need a couple of things.
First, you will need a wiring harness for the Camaro, # 118486. This is a standard US style 4-Way flat. As such the brake lights and turn signals are combined on the same circuit.
In order to get the amber turn signals to work on the trailer you would also need converter # 118158. This converter has a white... view full answer...
The only bike rack that we have as a fit for your 2012 Chevy Camaro is the SeaSucker Komodo Bike Rack for 1 Bike - Fork Mount - Vacuum Cup Mounted - Black # 298-BK1910-BKI. Check out the video of this innovative product.
The # TH45JV hasn't been confirmed as a fit for you vehicle so I cannot recommend it for you. view full answer...
The best recommendation I can make for your son to carry a lawnmower and weed eater with his 2015 Camaro is to install a trailer hitch and use a small trailer.
As long as the Camaro is not the ZL1 or Z/28 model, the vehicle has a tongue weight capacity of 100 pounds with a towing capacity of 1,000 pounds. Based on the 90 pound weight of the lawnmower, carrying the mower and weed eater on a hitch mounted cargo carrier will be too heavy for the vehicle.
If the 2015 Chevrolet Camaro is... view full answer...
For a great cargo carrier that includes your required dimensions of 48x27, I recommend the 30x50 Curt Cargo Carrier w/ 48" Ramp - 2" Hitches # C18112. The Curt comes with 50-1/4" long x 30-7/8" wide x 3-3/4" tall internal dimensions. The ramp is fully collapsible so that you can fold the carrier up against the rear for storage. As far as weight capacity, the carrier has a max capacity of 500 pounds. It is important to note that the length of the shank measures 7-1/4 inches from the center... view full answer...
The Curt Hitch part # C11222 that you referenced would be the correct hitch for your 2014 Chevy Camaro RS Convertible. This hitch does use bolts to secure to your vehicle. For more information on how it installs check out the installation instructions I attached.
For a bike rack I would recommend the Swagman XTC2 part # S64670, this is one of the most popular bike racks we offer with our customers. Check out the review video I attached as well. view full answer...
For an axle-back system for your 2015 Chevy Camaro LT Convertible you would want the part # MF19185 which is an axle-back system designed specifically for your vehicle.
The system you referenced is not a fit for your vehicle. view full answer...
The Derale 26" Dual High-Output, Electric Radiator Fan-and-Shroud Assembly # D16927 would work perfectly for you since it is 18 inches tall and 26 inches in width and moves quite a bit of air.
This setup can flow 4,000 CFM which is perfect for a big block Chevy engine. view full answer...
The only calculation you need to do is add the weight of your cargo carrier to the weight you plan to carry on the cargo carrier and then compare that to the 200 lb limit of the Draw Tite hitch part # 24850. If the weight's you added up are less than 200 lbs the hitch is good to carry the setup.
The # 63155 weighs 39 lbs so you'd have 161 lbs left over for cargo weight. view full answer...
The Draw Tite hitch part # 24850 that you referenced is a fit for your 2011 Chevy Camaro and has a 2,000 lb total trailer weight capacity. A 300 lb boat would be fine for the hitch but you would need to check the owners manual of your vehicle to determine if your vehicle as it is equipped is rated for towing the weight.
The correct ball mount to use is # 3593. For a 1-7/8 inch ball use # 19256 and for a 2 inch ball use # 19258. For trailer wiring you can use # HM11141285. view full answer...
I do have a solution for you but none of the Yakima kayak carriers will work with the roof rack on your 2010 Chevy Camaro. The issue is that the crossbar spread (center to center distance from one bar to the other) is only 20 inches. You would need at least 24 inches. You can't change the position of the bars on the roof since the parts are contoured to match the roof line.
What you would have to do is use foam blocks # RL100K10, one set for each kayak. And there will need to be enough... view full answer...
Yes, I just got off the phone with my contact at Tow Ready and he informed me that the wiring harness part # C59496 that you referenced has been confirmed to fit your 2014 Chevy Camaro with LED taillights. view full answer...
For a trunk bike rack confirmed as a fit for your 2015 Chevy Camaro coupe we have the Hollywood Racks Expedition part # HRF6-2 as a confirmed fit that would work well. I attached a review video for more info on it as well.
If you plan on carrying any womens or alternative framed bikes without horizontal top tubes you may also be interested in purchasing a Kuat Bike Frame Adapter Bar # UB01 to provide a horizontal top tube on your bikes to provide an attachment point. I attached a review... view full answer...
I believe we have just what you are looking for. Check out the Brophy Hitch Step part # RHS2. This actually has two steps. One lower than the hitch shank and one that sits above it. This would not require any hitch adapters to get a step lower than the hitch tube.
For a locking hitch pin we have the part # e98880 which would work well. view full answer...
I recommend the Aluminum Car Hauler Ramp Set - 60" x 14-1/2" - 6,000 lbs - Qty 2, part # 288-07502, instead. It is rated up to 6,000 lbs. The ramps are 5' in length. The Loading Ramp Set - Aluminum - 65" Long x 20-1/2" Wide - 3,000 lbs - Qty 2, part # 288-07489 you attached to this question, will not work for your 1993 Chevrolet Camaro. Unless it weighs less than 3,000 lbs.
I have included a product description link and video review links below. view full answer...
To add a 5-way which you can use to include a reverse circuit on your 2012 Camaro, you can then use part # 20036. This plugs into the 4-way connector on the vehicle. You will then need to attach the included blue wire to the reverse light wire behind your tail light. You will then have a 5-way flat trailer connector with the reverse function included. The problem is, if you don't already have a 4-way on your Camaro, we don't have one to fit as of October 2023.
When working with electrical... view full answer...
For your 2013 Chevy Camaro Convertible RS you would want the Curt Hitch part # C11222 as this hitch has been confirmed to fit your vehicle.
The most popular bike rack we carry that has been confirmed to fit this vehicle is the Swagman XTC2 Bike Rack part # S64670. This rack has a ton of positive reviews from our customers who have tried it. Check out the review video I attached for more info.
With this Curt hitch all non-trailer loads - bike racks, cargo carriers and so forth - should... view full answer...
Go To Results