Expert Answers about Honda CR-V

• Adapter to Connect Trailer 7-Way to 2019 Honda CR-V With 4-Way
• Since you don't plan on using other functions of the 7-way and only want to use the 4-way functions of the trailer wiring on your 2019 Honda CR-V all you have to do is add an adapter, the Adapter 4-Pole to 7-Pole # 37185. You can simply plug this into your 4-way and tie off the remaining wires as you will not be using those functions. The only thing I'm not certain about is where you will mount it as we aren't familiar with the factory hitches and I was unable to find an image of where...
  view full answer...


• Will 1-1/4 Inch Ball Mount With 5-1/2 Inch Rise Work if 5 Inches of Rise is Needed
• That's a good question, and you did indeed measure correctly, from flat ground to the top of your hitch receiver. Since that measurement is 10 inches and your trailer coupler is 15 inches, 5 inches is the correct rise, but an extra half-inch is absolutely acceptable, so you can use the Brophy ball mount: - Brophy Drawbar for 1-1/4" Hitches - 5-1/2" Rise, 6" Drop # BM96 As long as you're within about an inch or so of being level you won't have any issues at all when towing. So the # BM96...
  view full answer...


• Correct Custom Seat Bracket Adaptor 2014 Honda CRV
• Yes, the RoadMaster BrakeMaster Custom Seat Adapter # RM-88196 for the Roadmaster Brakemaster # RM-9160 is the correct adapter for your 2014 Honda CR-V. This is the correct adapter for the 2nd, 3rd, and 4th generation of CR-V's which span from 2002-2014.
  view full answer...


• Correct Yakima BaseClips For a 2020 Honda CR-V With A Naked Roof
• Yes, that is correct. If you already have the Yakima BaseLine Towers, part # Y28TR, and the Yakima crossbars, all you will need are the two Yakima BaseClip Fit Kits for the BaseLine Towers, part # Y06188, and part # Y06189. I have included product descriptions for the fit kits and a video link of 2018 Honda CR-V Yakima BaseLine roof rack installation below. I know it is not the same year as your CR-V, but they are the same generation, so there will be some similarities.
  view full answer...


• Can a Road Bike Fit on the Hollywood Racks Sport Rider SE Bike Rack for 2 Electric Bikes
• The Hollywood Racks Sport Rider SE Bike Rack for 2 Electric Bikes # HLY84FR will be a great solution for your application. The wheel hoops are shaped with a point to them so they can accommodate small road bike tires up to 5" fat bike tires. When it comes to overall usability it's really hard to beat the Sport Rider SE. Attached is a review video for you to check out.
  view full answer...


• Trailer Hitch that Fits 2020 Honda CR-V Hybrid
• Yes we have the etrailer hitch part # e98848 that fits your 2020 Honda CR-V hybrid. This is a mostly hidden hitch with a 2 inch opening that I attached an install video for to this page.
  view full answer...


• What is Best Trunk Mounted Bike Rack for 2016 Honda CRV
• The Yakima FullBack part # Y02633 is the best trunk mounted bike rack that fits your 2016 Honda CR-V and would be the rack I would recommend over any other options including the Saris Bones you mentioned. This lightweight rack is the easiest to install, has the nicest and easiest to use frame cradle strap and only option with a lock setup for the rack and for the bikes that mount to the rack.
  view full answer...


• Hopkins 4-Pole Flat Wiring Harness for Trailer with LED's
• It does not mater if the trailer you are towing has LED or Incandescent lights. The Hopkins Plug-In Simple Vehicle Wiring Harness with 4-Pole Flat Trailer Connector, # HM11143274 is confirmed to fit the 2016 Honda CR-V and includes a tail light converter to ensure that your vehicle's wiring matches that of your trailer. The powered module pulls power directly from battery to avoid overloading vehicle's electrical system.
  view full answer...


• Parts Needed For Flat Towing a 2011 Honda CR-V With Falcon 2 Tow Bar
• The Roadmaster Direct-Connect Base Plate Kit # RM-521559-5 will have a height of approximately 17-1/4" on your 2011 Honda CR-V with 225/65-17 tires. Depending on your tire size and any suspension sag over time your exact height may be different. You will need to verify the receiver height on your tow vehicle to determine if you will need a high-low adapter for the Roadmaster Falcon 2 Tow Bar # RM-520. The High-Low Adapter is available in a 4" # RM-048-4, 6" # RM-048-6, 8" # RM-048-8,...
  view full answer...


• Will The Hands Free Sensor To Open The Trunk Work With A Trailer Hitch Receiver On A 2017 Honda CR-V
• The Curt Trailer Hitch Receiver - Custom Fit - Class II - 1-1/4" # C12169 is confirmed to fit your 2017 Honda CR-V and will allow you to use the hands free sensor on either side of the rear bumper. The center sensor will be blocked by the hitch receiver opening, but just a few inches to either side of center will work fine. Unless you are looking for a small hitch, I recommend you go with the Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" # C13397 instead. Unfortunately...
  view full answer...


• What Year Range Does a Draw-Tite Max-Frame Trailer Hitch Receiver Part # 75690 Fit
• The Draw-Tite Max-Frame Trailer Hitch Receiver part # 75690 that you referenced will fit a Honda CR-V from 2002 - 2006. In order to reuse this trailer hitch you will also need the Replacement Hardware Kit for Trailer Hitches part # RHK as the hardware is a one time use only product. If you purchase a newer Honda CR-V from 2007 - 2011 you will need to use the Draw-Tite Max-Frame Trailer Hitch Receiver part # 75547 instead.
  view full answer...


• Do Tow Hooks Need to be Removed on 2019 Honda CR-V to Install etrailer Hitch 98848
• Yes. In order to install a trailer hitch like the etrailer # e98848 you will need to remove any tow hook that might be attached to the rear frame stanchions. It isn't uncommon for SUVs that don't come standard with a hitch come with some sort of recovery point, and they're typically able to be removed by un-doing a few bolts. This hitch has a 2" receiver that's perfect for carrying bike racks or towing a small trailer. It looks like you were looking at bike racks as well, so I've linked...
  view full answer...


• Is Yakima BackSwing Swing Away Hitch Extender # Y02483 compatible Swagman Traveler XC2 # S64663
• Yes, the Swagman Traveler XC2 Bike Rack for 2 Bikes - 2" Hitches or RV Bumpers - Frame Mount # S64663 will be compatible with the Yakima BackSwing Swing Away Hitch Extender for Bike Racks - 2" Hitches # Y02483. One thing to remember, The Yakima BackSwing Swing Away Hitch Extender will work great on your 2000 Honda CR-V, and other passenger vehicles, but it is not rated for use on RVs or trailers.
  view full answer...


• Is the Swagman Traveler XC2 # S64663 Compatible with the Yakima BackSwing Swing Away Hitch Extender?
• Yes, the Yakima BackSwing Swing Away # Y02483 will work with the Swagman Traveler XC2 # S64663. The Traveler XC2 is compatible with 2-inch hitches (not a combo hitch designed for 1-1/4 and 2-inch hitches). If you have a 2-inch hitch receiver, the Traveler XC2 does not require an adapter. If you need a 2-inch hitch receiver recommendation, I would be happy to assist you if you provide the year/make/model of your vehicle.
  view full answer...


• Roof Rack For 2016 Honda CR-V With Flush Rails For Thule Hullavator
• While there is a roof rack that fits your 2016 Honda CR-V that will allow you to use mount the Hullavator, it is too large to mount two of them, so to carry a pair of kayaks you could use one Hullavator but you'd need a J-style carrier for your second kayak. Let's go ahead and start with the roof rack for your 2016 Honda CR-V with flush-mounted rails, and the roof rack I highly recommend for your CR-V is from Rhino-Rack because it has the longest crossbars available for your vehicle to...
  view full answer...


• Recommended Cover For A Blue Ox Alpha 2 Tow Bar
• The Blue Ox Tow Bar Cover - Aladdin, Aventa LX, Aventa II and Alpha # BX8875 will fit your Blue Ox Alpha 2 Tow Bar - Motorhome Mount - 6,500lbs Item # BX7380 when not in use.
  view full answer...


• Compatibility of Hollywood Racks Destination 2 with etrailer Hitch for 2020 Honda CR-V AWD
• Yes. The etrailer # e98848 and Hollywood Racks Destination 2 # HLY94FR will work very well together on the 2020 Honda CR-V. The Destination bike rack has 10" from the center of the hitch pin hole to the closest part of the rack and the etrailer # e98848 hitch pin hole will line up almost even with the edge of the rear bumper so there will be plenty of clearance. You're correct that the installation will be the same on the 2020 CR-V as you've seen in the video for the 2021, so that'll be...
  view full answer...


• Recommended 7-Way Wiring Connector for a 2016 Honda CR-V
• I do have a way for you to install a 7-Way connector on your 2016 Honda CR-V. To start off you need a 4-Way so if you don't already have that you'll need to pick up the T-One Vehicle Wiring Harness # 118561. Now that we have the 4-Way installed you have the choice of the Complete Wiring Upgrade Kit # ETBC7 or the Simple Wiring Upgrade Kit # ETBC7L. The difference is that the former gives you what you need for a fully-functioning 7-Way while the latter provides the basic trailer light...
  view full answer...


• 2 Inch Trailer Hitch Confirmed to Fit a 2022 Honda CR-V
• We have a 2" hitch that fits your 2022 Honda CR-V. - etrailer Trailer Hitch Receiver # e98848 This hitch is made in the USA, has a bolt-on, no-drill installation and has the 2" hitch receiver you are wanting. The 2" receiver is the most common size used for hitch mounted accessories such as bike racks, cargo carriers and ball mounts. This hitch also has a nice matte black finish. If you plan to do any towing, you can round out a tow package by adding the T-One Vehicle Wiring Harness...
  view full answer...


• Will Thule OutWay 3-Bike Trunk Mount Carrier Part Fit 2007 Honda CR-V
• The Thule OutWay 3 Trunk-Mount Bike Carrier, part # TH56BV, will not fit properly on your 2007 Honda CR-V. However, we have two 3-bike trunk-mount carrier that is compatible with your 2007 Honda CR-V. The Yakima HangOut 3-Bike Rack, part # Y02638 and the Saris Guardian 3-Bike Rack, both are demonstrated in the linked videos. Of these two racks, I highly recommend the Yakima rack over the Saris rack because the Yakima HangOut has anti-sway cradles that will keep the bikes more secure...
  view full answer...