You will need a wiring kit to control the vehicle lights while in tow, the kit you selected is for towing a trailer with the Amigo not for towing the Amigo behind your RV. You can use the #38955 tail light isolating kit which will wire to the vehicle tail lights, and you will need a converter # 118158 because your vehicle has separate turn and brake lights. Another option is to use the light kit with bulbs, RM-155 which will use a separate bulb in the tail light housing and will eliminate... view full answer...
I have a solution for you. Unfortunately, we do not sell the bow system frame or hardware for the 1990 Isuzu Amigo top cover. However, we do carry a replacement top: the Pavement Ends Replay Soft Top Fabric for Isuzu Amigo # PE5113901. Even though the back window allows you to unzip it completely, the Pavement Ends top is not a convertible top. view full answer...
The Thule Spare Me 2 Bike Carrier # TH963PRO is not a fit for your Isuzu. However, the Malone Runway Spare Tire Bike Rack for 3 Bikes - Adjustable Arms, Item # MPG2148 is a confirmed fit your 1989 Isuzu Amigo so it would work well for you. I attached a review video for you to check out as well. view full answer...
For your 1998 Isuzu Amigo you'll first need a trailer hitch that is rated for weight distribution. For that the Curt part # C13235 is a great choice. Then you can use a weight distribution system like the Blue Ox kit part # BLU45FR which has a tongue weight range of up to 550 lbs.
For a 2-5/16 inch ball # 19286.
For trailer wiring you'd then want the Hopkins kit part # HM43215. view full answer...
I pulled the Optronics Sealed 4 Inch Round Trailer Light, # ST47RB, from the warehouse and measured the diameter of the light housing that will be recessed in the trailer. It measures 4.44 inches in diameter so a 4-1/2 inch hole should be fine.
I spoke with my contact at Optronics and they do not recommend a specific hole diameter for this light, but most flange and flush mounted 4 inch lights require a 4-1/2 inch diameter hole. view full answer...
This Tow Ready Custom Fit Vehicle Wiring, # 118360, would be the correct wiring kit for your 1999 Isuzu Amigo. Most likely the 5x8 utility trailer that you are renting will have a 4-way connector that will plug right into the 4-way trailer connector from the # 118360.
I attached installation instructions for this product for you to check out also.
You may also be interested in the following products to complete your tow setup:
Curt Trailer Hitch # C13235
Class II Drawbar # 36053
Hitch... view full answer...
According to the install instructions for the Curt hitch part # C13235 (that are attached), the horizontal mounting bracket of the Curt hitch part # C13235 does have the notch like our product pictures. I can assure you the hitch you order will have it and it will fit your 1999 Isuzu Amigo.
If you wanted to do some towing you might be interested in etrailer ball mount kit # 989900. It comes with 2 ball mounts; one with a 3/4 inch rise or 2 inch drop and one with a 2-3/4 inch rise or 4... view full answer...
To install the Carr Deluxe Light Mounting Bar # CARR210341 that you referenced on your 1994 Isuzu Amigo, you will just need the Gutterless Mount Kit # CARR220051. This bracket is confirmed to fit your vehicle and will allow you to mount the light mounting bar with ease. Its custom design will ensure a precise fit and all the needed hardware is included.
I have attached the installation instructions that you can also check out. view full answer...
Go To Results