Expert Answers about Nissan Altima

• Easiest Hitch To Install On A 2022 Nissan Altima
• When it comes to installing a trailer hitch onto your 2022 Nissan Altima the Curt Hitch # C11352 and The Draw-Tite Hitch # 24796 are your two options. Both hitches have a similar installation process but I would recommend The Draw-Tite Hitch # 24796 to have the easiest installation because you do not have to permanently remove the heat shield for the hitch installation like you do on the Curt Hitch. The Draw-Tite hitch has a maximum tongue weight of 200 pounds, and has a receiver opening...
  view full answer...


• Do I Really Need To Use an Extra Tensioner With My Snow Tire Chain?
• While the Titan Chain Cable Snow Tire Chains # TC1034 'technically' don't need chain adjusters or separate tensioners, I highly recommend them. Especially since they don't have a self-tensioning system like the Konig CG9 # TH00023100 or even cam tighteners. These cable tire chains are designed to be tightened by adjusting only the front and the back connections. Without a tightener, you'll have to go back and forth until you fine-tune the tightest fit, and even that fit has a wiggle room...
  view full answer...


• Trailer Hitch and Related Towing Items for 2012 Nissan Altima
• If you have the sedan version of the 2012 Nissan Altima then the 1-1/4-inch Class I hitch I recommend is the Draw-Tite # 24796, which has a maximum trailer weight capacity of 2000-lbs. You'll need wiring harness # 118470 to operate the trailer lights. An installation article and video are linked for you. You'll also need a ball mount # 3594 which includes a pin/clip, along with a hitch ball like 1-7/8-inch # 19256 or 2-inch # 19258. The trailer coupler will indicate the ball size required. I...
  view full answer...


• Hitch and Other Equipment Needed to Tow Rental Trailer With 2020 Nissan Altima
• In order to tow your rental trailer, you'll need to install a trailer hitch like the Curt # C11352 and a trailer wiring harness such as part # 118731. You'll also need a ball mount like # C45521 and a trailer ball like # A-80 for a 1-7/8 or # A-82 for a 2 inch diameter ball. You'll also need a # PC2 hitch pin. If you click the provided link, you can see a video showing the hitch being installed.
  view full answer...


• Recommended Hitch Cargo Carrier for Class I Hitch on 2013 Nissan Altima
• Yes. You can use something like the 20 X 47 Reese Carrier # 63155, which is compatible with 1-1/4" hitches. This carrier weighs around 44-lbs so it would allow you to carry roughly 156-lbs of cargo on the back of your 2013 Nissan Altima, but I do recommend confirming the tongue weight capacity in your owner's manual to be sure it is 200-lbs. While I think your best choice is above, you could also look at the other 2 compatible carriers, the # C18145 and the # C18110. These are both made...
  view full answer...