The WeatherTech Custom Front Auto Floor Mats # WT463401 that you referenced do have the grommets needed to install into your 2014 Hyundai Accent. I can assure you that these will have the grommets, they are custom made for your 2014 Hyundai Accent Sedan. view full answer...
There is no drilling or welding required to install the Draw-Tite trailer hitch # 24884 on a 2012 Hyundai Accent 5 door hatchback.
Because this is a Class I hitch, you must use a compatible bike rack and you will only be able to carry a maximum of 2 bikes. For a bike rack I recommend the Swagman Titan, # S63400. It is Class I compatible, can tilt down, and includes an integrated cable lock. I have included some links on this rack for you. view full answer...
I attached installation instructions for the Curt Circuit Protected Converter # C56175 that you referenced. I will send them to you in a separate email as well. view full answer...
In Rola Rail Extreme roof rack # R6002 for your 2013 Hyundai Accent 5-door hatchback there is an included threaded stud. The studs go in the fixed points on the vehicle roof. Then there is a fastening knob that fits into the top of those studs within the rail feet as part of the foot assembly. You can see this in the attached installation instructions. You may want to add locks # 59316 to secure your investment. view full answer...
I spoke to my contact at SportRack(Thule) about installing the SportRack Semi-Custom Roof Rack part # SR1003 on your 2004 Hyundai Accent 3-door. They informed me that the mounting feet on the front crossbar will need to be placed in the 19-3/4 position and the mounting feet on the rear crossbar will need to be placed in the 13-3/4 position. The front crossbar will then need to be placed 24" forward of the point where the edge of the door meets the cab and the rear crossbar will need to... view full answer...
The Tow Ready Custom Fit Taillight Converter # 119178KIT installs in your 2011 Hyundai Accent Hatchback by connecting to the wiring at the tail light assemblies. This harness works with both LED and incandescent lights and has an auto-reset feature.
The kit includes the harness with 4-pole connector, a circuit tester to confirm the function carried on each vehicle wire, and quick-splice connectors. I have attached the written installation instructions as well as a sample video showing... view full answer...
Yes, check out the link I attached that will take you to the installation instructions for the Draw-Tite Hitch # 24884.
Also, this hitch is the correct hitch for your 2012 Hyundai Accent Hatchback.
You might also be interested in purchasing the following products to complete your towing setup:
Ball Mount # 3592
Pin and Clip # PC2
1-7/8 inch Hitch ball # 19256
Trailer Wiring Harness # 119178KIT (instructions and video attached) view full answer...
The Draw-Tite Trailer Hitch # 24795 is a fit for your Hyundai Accent 3 Door Hatchback. In order to install this trailer hitch on your Accent, you will need to lower the muffler to gain access to the weldnuts to install the hitch. I have attached the installation instructions for this hitch for you.
We recommend cleaning the weldnuts before installing the trailer hitch. This will help ease your hitch installation. First you will want to spray the weldnut with a spray lubricant, then clean... view full answer...