Expert Answers about Chrysler 300C

• 4-1/2 inch Rise Ball Mount Recommendation for a 2007 Chrysler 300C Towing Trailer
• You are correct, you do need a 4-1/2 inch rise ball mount to tow your trailer level. The best option will be the Curt ball mount part # C45240. When used in the rise position it will give you exactly a 4-1/2 inch rise. This ball mount also has two hitch pins so that it can be extended out past your rear bumper if the clearance is needed. For a 2 inch ball to fit this ball mount you would want the part # 63845.
  view full answer...


• Recommended Trailer Hitch Receiver for a 2006 Chrysler 300C SRT8
• For your 2006 Chrysler 300C SRT8, I recommend the Draw-Tite Max-Frame Trailer Hitch Receiver # 76145. This hitch will be a custom fit for your vehicle and not only will fit and look nice but will be really strong and durable with a tongue weight rating of 675 lbs and towing weight rating of 4,500 lbs. These ratings likely surpass your manufacturer specs, so I recommend checking with the manufacturer using your VIN as your owners manual won't give the actual towing capacity for your model. This...
  view full answer...


• Will Trailer Wiring Ruin the Paint Finish on a Chrysler 300C When Routed Out of the Trunk for Towing
• The wiring being stored in the trunk is pretty standard especially on passenger cars. When the wiring is closed in the trunk the rubber seals protect the wiring and the vehicle finish. You will not want to allow a large amount of extra wire to be left hanging out of the trunk or the wind could cause the wiring to rub on the vehicles finish. Find a happy medium and you should not have any problems. Keep the wires clean so that when you are towing, grime on the wires does not have a chance...
  view full answer...


• Recommended Ball Mount for Curt Trailer Hitch on a 2018 Chrysler 300
• Based on our research the top of the inside of the Curt Trailer Hitch # C13236 is going to be about 11-3/4" off of the ground when installed on your 2018 Chrysler 300C. To determine the best ball mount height to keep your towing setup level you simply need to measure from the ground to the bottom of your trailer coupler while it is on level ground and then choose a ball mount that has a rise/drop that will get you as close to level as possible. If your coupler is higher than the receiver...
  view full answer...


• Ground Clearance of Curt Class III Hitch Installed on a 2011 Chrysler 300C
• The Curt Class III hitch part # C13093 measures 10-1/2 inches from the TOP of the hitch opening down to the ground. We know this since we installed this hitch on a 2012 Chrysler 300C. So since this is a 2 inch hitch and the lip of the hitch opening would be about 1/2 inch from the bottom of the hitch to the ground would measure right at 9 inches.
  view full answer...


• Best Hitch Option for 2006 Chrysler 300C to Allow Use of Hitch-Mounted Motorcycle Carrier
• In order to use a hitch-mount motorcycle carrier on your 2006 Chrysler 300C you will need the highest-capacity hitch available and this is the 2-inch Class III Curt # 13465. Curt's warranty requires that you use a support strap # 18050 for all non-wheeled loads such as hitch motorcycle carriers. You will need to check your 300C owner's manual for any indications as to its tongue weight (TW) capacity. TW is downward force on the hitch, such as the weight of the carrier you use plus the...
  view full answer...


• 2014 Chrysler 300C with Panoramic Roof Rack Recommendation
• We have roof racks that fit your 2014 Chrysler 300C like the Rhino Rack part numbers # RRVA137-2, # RRRLKVA, and # DK318 but I checked with Thule and they do not have a fit for your vehicle. I checked the fit kit instructions for this roof rack and there isn't an exlusions for vehicles with the panoramic roof so this will work well for you in that regard as well. The Rhino Rack roof racks are high quality racks like Thule but they happen to cost less which is nice.
  view full answer...


• Trailer Hitch Recommendation for 2006 Chrysler 300C SRT
• The Draw Tite hitch part # 76145 that you referenced is a confirmed fit for your 2006 Chrysler 300C SRT and would work well. I attached an install video for this hitch as well.
  view full answer...