Expert Answers about Chrysler 300C

• Will the # D15500 Oil Cooler fit on my 2006 Chrysler 300C SRT-8
• The # D15500 is a universal fit product, and what that means is that as long as you have the room underneath your hood to mount this Derale 16-Pass Electra-Cool Remote Engine Oil Cooler Kit w/ Fan, -8 AN Inlets - Class II, part # D15500, it should fit on your 2006 300C SRT-8. The dimensions of the # D15500 are 15-3/4 inches wide, 11-1/2 inches tall, and 5 inches deep. If you have an area under your hood that would fit something of those dimensions you should be able to install the # D15500.
  view full answer...


• Will Curt Class III 2 Inch Hitch # 13465 Fit a 2006 Chrysler 300C SRT-8 Model
• I spoke with my contact at Curt and they said that the Curt Class III 2 Inch Hitch, part # 13465 will fit the 2006 Chrysler 300C SRT-8 model. I am including a link to the installation instructions on the Curt hitch. If you will be towing with this hitch you will also need the following items. Draw-Tite Ball Mount, part # 2753 Pin and Clip, part # PC3 Tow Ready 2 Inch Hitch Ball, part # 19258, or Tow Ready 1-7/8 Inch Hitch Ball, part # 19256 I am including a link to the installation...
  view full answer...


• Will Thule OutWay 3 Bike Carrier Fit on a 2008 Chrysler 300c
• Yes, the Thule OutWay 3 Bike Carrier, # TH56BV, will work great on your 2008 Chrysler 300C. I recently had the chance to install this rack on a vehicle and it is the easiest to install and remove trunk mount rack that I have used. For this reason, this is the rack I personally would choose for a trunk mount rack. You may also want to consider a bike adapter bar, # TH982XT, for use with bikes that do not have a horizontal cross bar for carrying the bikes level, see video.
  view full answer...


• Class III 2 Inch Curt Trailer Hitch Receiver to Fit a 2016 Chrysler 300C
• We actually have two Class III, 2 inch trailer hitch receivers from Curt that fit the 2016 Chrysler 300C. Curt # C13236 and # C13093 will work for you. I've linked a video of the # C13093 installed on a 2012 300C for you. If you're going to be towing a trailer with the 300C you'll need a wiring harness for the trailer's lights. The Tekonsha # 118658 is confirmed to fit. It plugs in behind both tail lights then has the hot wire ran to the battery. You'll also need a ball mount and...
  view full answer...


• Carrying Stand Up Paddleboards with a Rhino Rack Roof System
• Your roof rack system is compatible with the Rhino-Rack J-Style Kayak Carriers, part # S512. The universal mount will allow it to clamp to the bars with no trouble at all. I contacted Rhino Rack and they strongly recommend against using a kayak carrier for this application, and instead, to use a dedicated SUP solution like the Rhino-Rack Sup and Surfboard pads, part # RRRWP03. This is a one-per board solution sized for Rhino Rack's aero crossbars, and includes all straps and tie-downs...
  view full answer...


• Adding an Anti-Rattle Device to Replacement Swagman Bike Rack Shank for 2 Inch Trailer Hitches
• The threaded pin, # P5901, will only fit Swagman racks that have a 2 inch shank. The anti-rattle insert fits in a 1-1/4 inch shank. So these parts are not compatible. But if you are using the replacement shank # P249 then you could just use # 63232 which is an anti-rattle device and hitch lock in one. I have linked a video review of this device for you.
  view full answer...