We have the replacement hardware kits available with part # RHK. When you get to the web page you will need to enter # 13333 in for the Hitch Item Number. This will get you the correct hardware replacement kit for your hitch. view full answer...
We have just what you need for your B&W # BWRVK3200 fifth wheel head.
The slider base you can use is part # BWRVB3270. This base is desigbned to work with all of the B&W Patriot fifth wheel heads and will work great for you. This features 12-inches of front to back travel and with your head increases your gross towing weight capacity from 16,000-lbs to 18,000-lbs.
The price for our products can be found on the product page on our website. view full answer...
Your 2014 Ram 1500 will need the Replacement Tarp for Extang Trifecta 2.0 Soft Tonneau Cover - Black, part # EX92425-20. This is the replacement tarp for the Extang Trifecta 2.0 that fits your truck bed. view full answer...
I can certainly point you in the right direction. Knowing the year make and model of your truck will be enough to narrow things down in this case. The Leer HF350M Tri-fold Tonneau For A 2019 Dodge Ram 1500 Crew Cab short bed is part 631298. This cover uses the 205761 Replacement Prop Rod which we have available under our part number # LE44MR. view full answer...
The correct Replacement Mounting Hardware Kit for Westin PRO TRAXX Oval Nerf Bars part # 21-23565 on a 2018 Ram 1500 Crew Cab is the part # 21-2356PK. view full answer...
To replace the hardware that comes with the Curt Trailer Hitch Receiver # C13419 for your 2023 Ram 1500 we have the part # RHK but this includes all of the hardware.
Unfortunately we don't have individual hardware parts for any of the trailer hitches that we carry - just the entire set of hardware. view full answer...
In order to choose the correct replacement axle for a Malone MicroSport you'll first want to start with the weight capacity. The weight capacity can be found on the axle tag in the center of the beam. Then, you'll need to measure the hub face (center of hub face to center of hub face) and spring center (center of spring center to center of spring center). This will then give you the info needed to pick out the correct replacement axle for your trailer. I have also attached a video I did... view full answer...
Yes, the 2-Wire RV Propane Gas and Carbon Monoxide Detector, # RS54FR has two different mounting brackets to select from allowing coverage of the existing hole from previous installs. Please note the attached product review video. view full answer...
It sounds like you want to change out a baggage door style latch such as # 295-000015, which opens only from the outside with a key, with an entry door style latch like # 295-000019 or # 295-000002 which also opens from the inside. You can see and select both types of latches on the page I linked for you; just click on the type at the top of the page.
You will want to check the size of the opening in your door to ensue a proper fit. view full answer...
The USA-made DeeZee 6-Inch Oval Tube Steps # DZ16121-16336 can be installed on your 2015 Ram 1500 using installation bracket kit # DZ16336. This kit includes the brackets and all required hardware. Instructions are linked for your reference. view full answer...
Though we should have a replacement axle available for you, I was unable to find any info on what came on your 1987 Pacific Trailer, unfortunately. With that being said, you will need to find a few things.
First you will need to measure from the center of one spring seat to the center of the other and then from hub face to hub face. This will get you the needed lengths, but you will need a couple more things to find the correct one.
Next will be the capacity needed. We have axles rated... view full answer...
Possibly, if there is an axle tag on your 1995 Jayco Eagle 10 ST then I can use this to determine the correct hubs and braking assemblies. If you know your axle capacity then that can be used as well but the axle tag is preferred. Based on the weight of your trailer, the Dexter Hydraulic Trailer Brake Kit part # 23-398-399 could work if your existing braking assemblies measure 7" x 1-3/4". The Dexter Trailer Hub and Drum Assembly part # 8-257-5UC3-EZ would then be a match for these and... view full answer...
I am sorry to hear that. Usually the vinegar solution is a completely safe cleaning method. To replace the valve I recommend the Valterra RV Water Heater Bypass Valve # P23401LF. I prefer this one over the others because it is the approved replacement from Dometic, and we have received much better feedback on these than we have with other brands. view full answer...
Considering that you've flushed the brake lines, we can rule out a clog causing this issue and because you've already replaced the master cylinder, it's not outside of the realm of possibilities that the actuator just needs to be replaced. You could check the actuator bolt/shock on the coupler mechanism as that might be what's sticking and creating this issue, but as you've seen, replacement parts for Atwood couplers are difficult to come by.
For this reason, I do recommend simply replacing... view full answer...
The correct replacement winch for the SnowBear Personal Snowplow for 2" Hitches - 82" Wide x 19" Tall part # SB324-080 is the Replacement Single Speed Electric Winch part # SB263-282. There is not individual replacement parts for the winch unfortunately. view full answer...
I don't have any way of looking up what specific locks were used on your Forest River 16BHS, but I can say that Global Link provides most of the entry door lock sets for later model RV/Campers.
The lockset fits doors that are 1-1/4" to 1-1/2" thick and installs into latch cutouts that are 2-1/2" wide x 3-1/2" tall to 3" wide x 4" tall.
If the door thickness and the rough opening that the existing latch fits into meets the above parameters, the
# 295-000019 entry door latch kit door... view full answer...
The Replacement Mounting Hardware Kit # 21-2356PK is the only one available for Westin PRO TRAXX 4" nerf bars that fit your 2014 Ram 1500 Crew Cab. There is a note saying that these only fit if the bars are manufactured after 2017 so if you have an older set then there unfortunately isn't a replacement hardware kit available. This means your options are to either have a shop fabricate something for you or get new bars.
If you really like the PRO TRAXX bars then we have 2 different color... view full answer...
If you have the Extang Revolution Soft Tonneau Cover part EX54425 on a 2013 Ram 1500 with 5-1/2' bed then the correct replacement cover is the Replacement Cover for Extang Revolution Soft Tonneau Cover part # EX53940. view full answer...
Unfortunately the Longview Custom Towing Mirrors # LO34FR are not available separately so you'd need to purchase both. Although, If these are less than a year old you could have the damaged one replaced by warranty. view full answer...