Yes, the 23" x 51" UWS Cargo Carrier # UWS65XR is a one piece carrier. It uses a thickened aluminum shank which is welded to the carrier. view full answer...
Hey Blair, so the Inno Hitch Cargo Carrier part # IN94MR actually comes with a hitch lock built into it so you would not need to add one to it. How it works is that you use the knob that is in the hitch pin area to secure it to the hitch and then using the anti-rattle knob that is more towards the rear of the carrier you are pinning the carrier to the hitch tube. Since this knob is lockable it acts as the hitch lock since there would be no way to pull the carrier out once locked to the hitch. view full answer...
Hi Huy,
You can start out with the Yakima EXO Swing Away Enclosed Cargo Carrier # Y62VR and then use the add-on TopShelf # Y94VR in order to haul a second cargo box # Y44VR or another accessory later on when you need it. view full answer...
Yes, you can make the Yakima EXO Swing Away Storage System w/ 2 Enclosed Cargo Carriers # Y74ZR with the exact parts you mentioned. In fact, those parts are exactly what the # Y74ZR is made of:
- Yakima EXO SwingBase Swing Away Hitch Extender - 2" Hitches # Y34VR
- TopShelf for Yakima EXO SwingBase # Y94VR
- (Quantity of 2) Yakima GearLocker Enclosed Cargo Carrier # Y44VR view full answer...
Hey Perry, so due to the door style that is at the rear of a 2023 Mercedes Sprinter the Inno tilt cargo carrier part # IN94MR wouldn't allow the door to open as it would sit up too tall even folded down but I do have a similar solution that would work.
You would need a carrier that swings away from the rear of the vehicle like the Yakima EXO part # Y62VR which would allow the rear door to open without interference. view full answer...
From the center of the hitch pin to the upright portion of the base of the Yakima EXO Swing Away Cargo Carrier part # Y74ZR measures 4-1/4 inches. The Straightshot extender part # Y69VR then could add an additional 7-1/4 inches so hopefully that would be enough for you. view full answer...
Hello David. Unfortunately, we do not offer a trailer hitch for the 2024 Lexus NX350 F sport. True there are hitches for the base model, but none of our manufacturers (Curt, Draw-Tite, Stealth Hitch, Eco-Hitch) make anything for the F-Sport Trim. If you need to carry cargo with your vehicle, the best option would be to use a roof rack with crossbars. This will allow you to carry a lot of different accessories like a bike carrier or cargo basket. I know this may not be exactly what you were... view full answer...
The Thule Arcos Enclosed Cargo Carrier part # TH25YE will partially obstruct the backup camera of your 2022 Toyota RAV4 but you would still be able to see around it. The same goes for the birds eye camera setup as well.
You will most likely want to turn off the backup sensor alerts when using this carrier though as it will beep at you when reverse as it will think you are close to hitting something. view full answer...
Hey HPA, I would go with the Air Lift kit part # AL64VJ that fits your 2019 Toyota RAV4 based on what you described and your needs. This gives you adjustable support that you can tailor as needed so that you get the exact amount of support you need when towing or carrying your cargo carrier. view full answer...
Hello Ej, great question. The EcoHitch # 306-X7192 will indeed be compatible with the Thule Arcos Enclosed Cargo Carrier # TH25YE.
In regards to the EcoHitch # 306-X7192, the pin hole depth is 2-1/4" so it will exceed the 1.5" requirement listed by Thule. view full answer...
For your 2016 Toyota Prius V you will need to install a roof rack to carry the boards you mentioned. Unfortunately only Yakima makes roof racks for your vehicle and they aren't exactly super cheap. So for that you would want the Yakima CoreBar part numbers # Y00425, # Y28TR, # Y06117, # Y06174. Which with that you'd be able to use the LockRack kpart # LR59FR that you referenced. This will attach to the crossbar by the top channel. view full answer...
The GearSpace 34 Enclosed Cargo Carrier item # HGK819 does not have backup lights. It has two LED tail lights, an illuminated license plate bracket, and reflectors. The LEDs have stop, turn, and the standard illuminated tail light function.
The lights are powered and controlled by a standard 4-flat connector. To add a trailer connector to your 5th wheel trailer, I recommend the 4-Pole Hardwire Kit with Circuit Tester item # 18252. This kit comes with a circuit tester which you'll need... view full answer...
Hello again, Dave. It is possible to mount the Yakima Ladder Roller # Y01163 upside down. We would not want the weight of the kayak on the roller during transport, but since you are using it just to load onto the J carriers it will be just fine. view full answer...
Yes, it will! The Yakima OffGrid Roof Cargo Basket item # Y07138-08 will work great with the Yakima JetStream Crossbars item # Y00425.
You will also need the TimberLine Towers for Yakima Crossbars item # Y33TR to attach to the Wilderness rails of the 2023 Subaru Outback.
If you do not have the Wilderness model you will need the following parts along with the item # Y00425 crossbars:
SkyLine Towers for Yakima Crossbars - Fixed Mounting Points, Flush Rails - Qty 4 item # Y53TR
Landing... view full answer...
Hey Jan, to locate the Torklift Generator carrier part # TLA7752 off-center in front of only one of the doors would require finding a welder/fabricator in your area who could add an additional hitch opening off to the side. This is such a rare request there isn't a product available for this specific application. view full answer...
Hey Dave! It's all going to depend on the depth of your tire and how far out the hitch pin hole sits in relation to the outside edge of the tire. The distance from the center of the hitch pin hole to the closest edge of the carrier is 8-1/2" on the Flint Hill Goods item # FHG69ZR. The top of the carrier is 8" above the hitch pin hole. view full answer...
Hey Laurie, so we have great e-bike racks that are RV approved like the Yakima OnRamp part # Y36FR but we don't have any trike carriers at all at this time unfortunately. view full answer...
Hello Jason,
We have a spare tire carrier for you, but the # RM-195125 is not able to carry dually wheels. Instead, for your 16 inch dual wheel, the only option for a carrier is the Roadmaster Hitch Spare Tire Mount # RM-195225. view full answer...
I would recommend verifying with Toyota or your owners manual but it appears your 2004 Toyota Sequoia has a tongue weight capacity that would be able to handle the weight of your motorcycle and carrier as-is. A new hitch wouldn't be needed.
I would recommend going with some additional suspension support which for that you'd want the SumoSprings kit part # SS68DR which can provide an additional 1,400 lb of suspension support. view full answer...
Hey Chris, the release lever for the HitchMate Cargo Stabilizer Bar part # HE4016-4017 is on the outer tube on the end of it opposite of the pad that touches the truck bed so its distance from outside of the truck bed will be based on how wide the bed is. If it's a narrower bed (closer to 59 inches) you'd be able to reach it pretty easy. But if it's a wider bed it would be closer to the middle of the bed an harder to reach.
Check out the review video link I attached for this for you to... view full answer...