I recommend using the Trailer Wheel Lug Nut # AM90070 with the Provider ST225/75R15 Radial Tire w 15" Viking Aluminum Wheel # A225R6FPS. The stainless steel finish will match the wheel better than chrome against the wheels. This lug nut has a 1/2" x 20 thread pitch which is the most commonly used size on trailer hubs. You will want to confirm this by either checking with a gauge or the trailer manufacturer.
We also have a Wheel Lock Set # RG01-150 for the same size wheel lugs. This is... view full answer...
Your first step will be to determine the trailer's tongue weight as it is when it's loaded up and ready to tow. I'll link you to an article that explains a few ways of doing this, but a wireless tongue weight/payload scale like the etrailer Tongue Weight Scale # e99044. In order to keep the tongue weight pretty constant, you'll want to be sure to load the car in a consistent manner, so it sits in the same spot in relation to the trailer's axles, so the tongue weight doesn't vary.
Weight... view full answer...
From the information available to me, the 2002 Lance 835 Lite truck camper is 16'-5" in length. I suggest Camco UltraGuard Slide-In Camper Cover, # CAM45771. view full answer...
The Yakima SkyBox Rooftop Cargo Box is an excellent option for a 2015 Honda CR-V. It's available in a 12 cu. ft. version part # Y07334 and an NX 16 cu. ft. version part # Y95AV. The SkyBoxNX has a dual sided opening, locks for security, and easy to use quick attach clamps. It is also made in the USA. In regard to hatch clearance, you'll be limited on most low-profile cargo box options like the above unfortunately because the vehicle has a large crossbar spread with short roof but the hatch... view full answer...
I double checked with Thule and the correct interior dimensions for the Thule Pulse Alpine Rooftop Cargo Box # TH613 are the numbers they list on their site of 82.75 × 23.5 × 10.5. It looks like they may have updated them at some point and we didn't make the needed change. I sent an update to have the correct size listed. view full answer...
Yes, the Draw-Tite Front Mount Trailer Hitch # 65082 that you referenced does fit your 2020 Chevy Silverado 1500 High Country diesel as it fits all models of the truck. view full answer...
I can help you determine the functions of the wires in the bundle you sent in a picture of by testing them with a circuit tester like part # PTW2993 but we don't have a way to identify them just based on color.
So have a buddy apply the various taillight functions of your truck while you probe all of the wire cores with the tester and you'll be able to know for sure the functions. view full answer...
There is no bumper or rear fascia cutting involved to install a hitch on your 2020 Honda Passport like the Curt Hitch # C13421. Basically the hitch just bolted right up to vehicle frame directly without any drilling or cutting. view full answer...
Since you have a 6 inch lift you'd want an adjustable ball mount with plenty of drop like the Flash Solid Steel Adjustable 2-Ball Mount - 2" Hitch # FA49-00-5900 which has a 10 inch drop. This has a tongue weight scale built into it as well. I know you don't want a 180 style of ball mount but this one has replaceable balls on the platform instead. Check out the review video I attached for more info as well. view full answer...
The Superwinch part # SW1475200 you referenced doesn't come with a mounting plate designed for attaching to an enclosed trailer floor but we can help with that.
You could use a hitch tube and have it welded to the the trailer frame or crossmember near the front like part # E-9. With a piece like this welded to the frame, you could use the Winch Plate # BDW20011 mount to attach your winch.
You'll need to pull up a portion of the floor to access where you'll attach it. Maybe locate the... view full answer...
The Optronics Streamline LED Trailer Tail Light # STL79RB is sold individually. If you needed more than one you'd need to order a quantity of two. view full answer...
The Go Power Solar Elite Charging System # 34282184 can provide up to 2,000 watts to typically a battery bank to charge them. So you wouldn't normally run your accessories directly from the panel and instead would from the batteries this kit keeps charged up. So what you could power with this setup would largely depend on the batteries you went with, but this kit will do a really great job keeping the batteries topped off so that you can use the accessories you mentioned as needed.
I... view full answer...
You don't use lube plates with pivoting pin boxes like the MorRyde Orbital that you have. Since the hitch and the pin box move together and do not rub against each other when the vehicle makes a turn the hitch won't get the same type of wear that you are worried about. This is because the pin box pivots instead. view full answer...
The Demco Hijacker Autoslide hitches like the part # DM8550034 and # DM8550035 are a really great slider hitch option for short bed trucks like your 2020 Ram 2500 with the OEM rail kit. You will need to use the rail kit adapter part # DM6099 so that it will fit your truck bed.
The Demco hitches have a couple distinct advantages over the Pullrites as well. The Demco is height adjustable between 15-1/2 and 18-1/4 inches whereas the Pullrite has a fixed height. The Pullrite requires capture... view full answer...
Actually we list the 18 inch part # MCH8518 and the 24 inch # MCH8524 as a fit for the 2013 BMW 328i which I believe is where your fit issue is coming from. We don't have a way to get just the adapters from Michelin either. view full answer...
I have a solution for you but because of the width of your leaf springs, the SuperSprings # TSS-106-40 are not going to be a workable solution for you since they do not make a SuperSpring to work with that size leaf spring. I would instead recommend using the Timbren Trailer Suspension Enhancement System Medium-Duty Trailers # TTRA1032 which will provide you with support for up to 7000-lbs of cargo on your single axle trailer and because the bolt directly to the trailer frame and sit above... view full answer...
Both hitches are what's called a concealed design, which means that the crossbar is concealed behind the bumper, and the only visible portion of the hitch would be the receiver tube and the safety chain loops.
Both hitches install in similar fashion, with the rear bumper beam being removed and the hitch mounted in its place. The Curt # C67JR hitch instructions call for the beam to be replaced so the hitch is sandwiched between the bumper structure and the trunk pan, while the EcoHitch... view full answer...
We have really solid universal style tow mirrors that we've tested and used on similar Chevy Colorados as your 2019 model like with the part # KS3990 but we don't have any custom-fit slip-on style at this time. Most likely due the fact your truck isn't as popular as a tow vehicle as other trucks. But the # KS3990 does install easily, is dual angle, and is really stable so it would work well for you.
I attached an install video link for these mirrors on a 2017 Colorado for you to check... view full answer...
There's an 18K available as part # DM8550034 or a 21K available as part # DM8550035. Either hitch will need the # DM6333 mount to fit into the factory pucks.
The Hijacker Autoslide is a great choice both for outstanding ride quality provided by the one piece wrap around jaw that holds the king pin tightly enough the much of the clanging and rattling is stopped as well as the convenience of not needing to get out of the truck to unlock the sliding mechanism on the fifth wheel hitch.
If... view full answer...
Go To Results