Thanks for the information. I checked with Lippert and didn't get anything back on the first two numbers and the last one is a fire safety code. The good thing is there aren't many options for replacement motor covers for Solera awnings. I have listed the ones we have below along with a picture to help identify them:
Black - Regal Drive Head - Replacement Front Cover for Solera Power RV Awnings item # LC643922
Black - Plain Drive Head - Replacement Front Cover for Solera Power RV Awnings... view full answer...
The round part of the white tab(s) included with the Double Snap RV Awning Clips # 3725044 is 3/16" in diameter and designed to fit in most awning roller channels. view full answer...
I think what you are meaning by "centerline" is a 16 foot measurement as taken from the center of the mounting arm to the center of the opposed mounting arm. The Solera 18V Power RV Awning, 16' Wide, # LC729486 requires 69" of open vertical space on the wall of your RV for installation; this is measured from awning rail straight down and needed for installation of wall-mounted brackets. The canopy fabric, when fully extended, is 15' 1" wide x 8' long.
An awning rail # LC715217 is needed... view full answer...
For your Solera Destination Manual RV Awning - 20' Wide - Extra-Long 9'8" Projection - White Item # LCV000335300-334718 I have the following answers for you:
The Solera Awnbrella Support Kit for 8' Projection RV Awning - 3 Pack Item # LC362237 are sold separately.
The item description states that the middle support pole is included with the awning.
The manufacturer stated that the approximate height of the arms is 85".
The width of the Solera Awning Rail Extrusion - White - 8' Long... view full answer...
The 14-foot dimension shown for the Solera 12V XL Power RV Awning # LCV000334942-362241 refers to the outside to outside spacing of the two included 78-inch-tall wall-mount vertical brackets that contain the awning support arms. The fabric canopy itself measures 13-feet and 1-inch.
Installation will require 2 of the 8-foot awning rail part # LC715216; you'll cut one down and mount the two next to each other to give you the appropriate overall length to secure the free end of the awning... view full answer...
The Solera Screen Room for 21' Wide RV Awnings - Tan Mesh # LC362224 has an awning rail-to-ground measurement of 130" which is pretty standard for a 21' awning. view full answer...
The fabric on the Solera 16' White Fade RV Awning Roller and Fabric (Std) # LCV000211492 is 16'. The roller and arms will stick out past the 16' of awning so you'd be looking at closer to 16.5'-17' total when you add those in. view full answer...
The distance between awning brackets on center for the Solera Smart Arm 12V Power RV Awning # LC405492 is 16 feet as that's how the sizes work. The roller of this is actually 15 foot 1 inch while this is listed as a 16 foot awning. view full answer...
The size of the brackets of the Solera RV Slide-Out Awning # LCV000182037 is 1.05" from the bottom of the bracket to the top of the rivet hole. With 2-3/4" of space from the top of the vent to the top of the slide you will have more than enough room to mount the awning.
This particular awning will fit RVs with slide-outs 116" to 121" wide and up to 48" long. I have added a link to our entire selection of awnings in case you need one that is a different size, and also added a link to a... view full answer...
The Replacement 18'1" Fabric for 19' RV Awning item # LCV000334424 you were looking at is made for Solera, Dometic A&E, or Carefree RV awnings. It is for a 19' awning assembly and measures 18'1" x 8'.
In order to determine if this is the correct replacement fabric for your 2009 Salem camper trailer you're going to need to determine what brand of awning you have. There should be markings or part numbers stamped or stickered somewhere. I do not have any way of knowing what's on your camper.
If... view full answer...
In regards to mounting the 63 inch Solera Smart Arm 12V Power RV Awning Conversion Kit, Lippert has told us the wall-mounted brackets require a minimum width of 2-1/2 inches for installation, but that at least a 3 inch width would be preferred.
That is true for the width of the brackets for both colors of the conversion kit:
- Black: Solera Smart Arm 12V Power RV Awning Conversion Kit # LC759516
- White: Solera Smart Arm 12V Power RV Awning Conversion Kit # LC759404 view full answer...
I was able to find online that your 2020 Forest River Vibe 28BH came with a 20 foot awning like what the Solera Smart Arm 12V Power RV Awning - 20 Wide - Programmable - Black Fade Item # LC517517 size is so this would work really well for you. view full answer...
All our Solera 12V XL Power RV Awnings are 9 feet 8 inches long. Meaning, the canopy extends 9'8" from your RV when fully extended and the Item # LCV000334919-362241 has a 12 foot long tube that will attach to your RV. I've Included a couple videos about these awnings if you would like to learn more! view full answer...
The Solera RV Slide-Out Awning - 5' Wide - 48" Projection - Black # LC23FR is designed to work with slide outs up to 60 inches wide. The awning fabric is 55 inches wide and the rail extrusion is 63-1/3 inches. view full answer...
The arm length of 68 inches to 81 inches is the range that the Solera Classic Universal Awning Support Arms will replace. So if you have a spring-loaded manual awning with arms that are between 68 inches and 81 inches long, you can use these support arms as replacements. They come in either black or white.
- Black: Solera Classic Universal Awning Support Arms for RVs - 68" to 81" Arms # LC434717
- White: Solera Classic Universal Awning Support Arms for RVs - 68" to 81" Arms # LC434718 view full answer...
The Solera Rollbar # LC338512357 is the correct replacement roll bar for a 16' Solera RV awning. The # LC338512357 rollbar itself is 184" or 15.3'.
In order to have a Rolbar that is 16' 6", it would need to be 198" long. We do not have a 198" rollbar available and I did not see one available from the manufacturer.
If your awning is not a Solera, this would not be the correct roll bar regardless and we likely would not have the correct rollbar that you would need. If you do have a Solera... view full answer...
In regards to the Solera 12V XL Power RV Awning part # LCV000335015-362241, the head of the support arm which is the furthest point out while closed will sit about 5-3/4" away from the side of the trailer. view full answer...
Thanks for the measurements of your slide outs. For the 157-1/2" one you will want the Solera RV Slide-Out Awning item # LCV000168110 and for the 83" wide one you'll need the Solera RV Slide-Out Awning item # LCV000165062.
The item # LCV000165062 for your 83" wide slider is back ordered until the end of the year. If you have the clearance on either side you can use the larger Solera RV Slide-Out Awning item # LCV000168106. It fits slide-outs that are 86" - 91" wide and is 91" wide overall.... view full answer...