Per Yakima, the YakimaFullBack 3 Bike Rack, part # Y02633 is a confirmed fit for your 2011 Venza with the panoramic roof.
I have attached a photo that shows the # Y02633 installed on the rear of a Venza you can check out.
If you are planning on carrying bikes with alternative frames like kids bikes or women's bikes I recommend using an adapter bar like part # 64005. This attaches between the seat post and the handlebar stem and allows the bike to be carried more level in the carrier... view full answer...
I have a solution for you that will allow you to use any 1-1/4" accessories you may already own but they did not make any 1-1/4" hitches for the 2022 Toyota Venzas. Instead you are going to want the etrailer Trailer Hitch Receiver item # e25AR. This hitch is custom fit and bolts to your Venza with included hardware.
This is a class III hitch with a 2" receiver that has a 525 lbs tongue weight capacity and a 3,500 lbs towing capacity.
To use 1-1/4" accessories you will want the Trailer... view full answer...
I checked with our rack manufacturers for you, and there is one roof rack option that will fit your 2013 Toyota Venza with the panoramic (or dual) sunroof, with the rack coming from Yakima; it is made up of the following parts:
- Yakima JetStream Crossbars - Black # Y00426
- BaseLine Towers for Yakima Crossbars # Y28TR
- BaseClip Fit Kit # Y06163
- BaseClip Fit Kit # Y06136
This is one of the best roof racks available, as the JetStream bars have what are called "WindRidges" built into... view full answer...
Yes, you can carry a heavy bike rack and pair of e-bikes weighing 195 lbs with the trailer hitch receiver that fits your 2022 Toyota Venza, which is the Curt Trailer Hitch Receiver # C89UR.
In terms of the vehicle, when I looked up the owner's manual online, it did not have a maximum tongue weight capacity (which is the maximum weight a bike rack and bikes can weigh) listed, but you would be able to carry your bikes with the Curt hitch's tongue weight capacity.
For example, with this... view full answer...
The correct trailer hitch fit for your 2021 Toyota Venza is the one that you mentioned, the Curt Trailer Hitch Receiver # C89UR.
This hitch has a 2 inch receiver along with a 2,000 lb towing and 200 lb tongue weight capacity, and due to the vehicle not being one that is designed for heavy towing, the capacities are going to be on the lower end as opposed to 500 lbs. We do have trailer wiring that will work with this vehicle, which is a universal hardwire option, the Curt Powered Tail Light... view full answer...
There is a whole host of Yakima accessories that will fit the factory crossbars on your 2013 Toyota Venza without the use of MightyMounts. Depending on which accessories you have they may be a direct fit.
Yakima only lists the universal MightyMounts, # Y03590, as a fit for the optional crossbars on your vehicle. They do not list the 23H MightyMounts as a fit. The universal MightyMounts are compatible with the Yakima BasketCase, most Yakima bike mounts, ski mounts and watersport accessories. view full answer...
The Thule OutWay 3, part # TH56BV, will not fit the Venza but will fit the Matrix. The size, shape and structure of the Venza will not support the 3 bike version.
The best way to carry an alternative frame bike, like a step-through, would be with a frame adapter. Thule offers a frame adapter, part # TH982XT, that should allow you carry a step-through frame bike level on the carrier. The adapter bar goes around the seat post and handle bars. I have added a link to a video review of the... view full answer...
The CURT Trailer Hitch, # 13356, is a Class III trailer hitch with a 2 inch receiver. It can handle a 4 bike trailer hitch mount bike rack and accepts racks with a 2 inch shank like yours. I have included a link to the installation instructions for the hitch for you to view. I have also included a link to an FAQ article on hitch classes. view full answer...
The Rightline Sport Jr. Rooftop Cargo Bag # RL100S50 can be mounted to a vehicle with a naked roof (no roof rack) like your 2009 Toyota Venza. The straps will run through the interior of the vehicle.
I also recommend using protective pad # RL100650. Not only will it help protect the roof it will also help keep the bag in place during acceleration and braking. Another helpful item is a wheel step such as # HE4040. It makes loading and unloading cargo from the roof and installation of the... view full answer...
The main difference between trailer hitch classes is the towing capacity (GTW) and tongue weight capacity (TW). Typically class I and II hitches come with a 1-1/4" receiver instead of a 2" receiver but there are a few on the market that do have a 2" receiver. Most trailer hitch accessories, like bike racks or cargo carriers for example, are made to fit 2" receivers. There are some that fit 1-1/4" receiver but with a 2" receiver you can always use a reducer to have a 1-1/4" accessory fit.... view full answer...
I pulled up the online owners manual of your 2022 Toyota Venza and Toyota states that it is not recommended to tow with your vehicle which is why they also do not list a towing capacity. So this begs the very valid question of why do we have hitches that fit your vehicle like the Curt # C89UR that you referenced which fits the hybrid models. The answer is that against manufacturer advice many people will still use the vehicle for towing or carrying bike racks so since there is a demand... view full answer...
Yes, we do. To add a hitch to your 2023 Toyota Venza, I recommend the etrailer Hitch item # e25AR. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a 3,500 lbs towing capacity and a 525 lbs maximum tongue weight.
I really like the etrailer hitch item # e25AR because the crosstube mounts behind your rear bumper leaving only the 2" receiver exposed. This not only looks better but helps with ground clearance.
If... view full answer...
With Curt trailer hitch # 13356 installed on a 2013 Toyota Venza we have found that the distance from the center of the hitch pin hole out to clear the rear bumper is 3-1/2 inches, see linked video showing installation.
On the Thule T2 for 2 inch trailer hitches 916, 916XT, 916XTR, or TH9044-TH9046 the distance from the center of the hitch pin hole to the closest part of the rack is 4-1/2 inches. So provided you have one of the T2 models listed you will have 1 inch of clearance between... view full answer...
It is true that the rear hands-free liftgate may not function on your Toyota Venza when installing the Curt Trailer Hitch Receiver # C89UR. The vast majority of the reviews do indicate it will work if you kick your foot to the side of the receiver, but it is possible it can be lost.
As for stopping going backwards, I am not sure to what this is referring and cannot find any other reference to it anywhere regarding the # C89UR. With the amount of these people have put on their Venza's and... view full answer...
I did some research and the CU89FR Curt Trailer Hitch Receiver item # C67JR fits a 2020 - 2022 Subaru Legacy and a 2020 - 2022 Subaru Outback Wagon. It will not fit a Toyota Venza. For your 2022 Toyota Venza you will want the Curt Trailer Hitch Receiver item # C89UR. I have linked an installation video below.
If you need a wiring harness I recommend the Curt Wiring Harness with 4-Pole Flat Trailer Connector item # C59236. view full answer...
For your application you're going to need the GasStop Emergency Propane Shut-Off Valve Gauges w/ GasGear 12" Propane Hoses # GS49FR. This comes with 2 of the GasStop valve/gauges and 2 pigtails that tie into a dual regulator like the MB Sturgis # 888001-MBS.
Please note that the pigtails come with 1/4" male inverted flare outlet fittings so if your regulator doesn't have adapters where the pigtails connect to it you'll also need 2 of the Adapter Fitting # 37207-30035 which you'll want... view full answer...
We offer trailer hitches from Curt, Hidden Hitch, and Draw-Tite for the 2012 Toyota Venza. I have attached a link to all of our trailer hitches for your Venza.
I recommend the Draw-Tite Class III Trailer Hitch # 75663. This hitch has a 2 inch hitch receiver, a towing capacity of 3,500 pounds, and a tongue weight capacity of 350 pounds. It is important to check your owner's manual for your vehicle's maximum towing capacity and tongue weight capacity before deciding what cargo you want to... view full answer...
All of the Thule 2-bike trunk mounted bike racks including the Thule OutWay you mentioned, # TH945JV are indeed compatible with a 2013 Toyota Venza, but three bike capacity models are not a fit.
To carry women's bikes or bikes with sharply angled top tubes or step-through frames, using a frame adapter like part # 64005 is recommended. The adapter spans the distance between the seat post and the handle bar gooseneck, and provides a level attachment point to the bike rack so the bike has... view full answer...
I checked with the manufacturer and the Curt Class III Hitch # 13356 and the Curt T-Connector Wiring Harness # C56079 are both confirmed to fit your 2016 Toyota Venza LE AWD. I've linked an install video for the wiring harness for you to use as a reference.
If you need a ball mount and hitch ball, the Curt Class III Ball Mount and 2" Hitch ball # C45036 can complete your towing package on your 2016 Venza. view full answer...
Go To Results