The 2006 Tundra could have been equipped with the 'Factory' hitch two different ways. If it was a dealer installed option, it would simply bolt to the frame members but if it arrived from the factory with the hitch, the hitch is tied into the bumper mounting brackets and the bumper would need to be replaced to remove the existing hitch. Since you've already replaced the bumper, you'll be able to install the # 13184, which Curt has confirmed for me.
For a wiring harness, you'll need #... view full answer...
There are several soft covers from TruXedo that fit the 2005 Toyota Tundra Double Cab with a 6 foot bed.
For the Truxedo Lo Pro or Lo Pro QT the replacement cover only you would need is # TX545101-COVER. (Fits Truxedo part 545101 )
For the Truxedo Edge the cover only you would need is # TX8451-CVR. (Fits # TX845101 )
For the Truxedo TruXport the cover you would need is # TX2451-CVR. (Fits # TX245101 )
These three replacement covers are the only soft options available from TruXedo for... view full answer...
We have exactly what you need with the Hopkins # HM40975 Mounting Bracket! This is the replacement connector for your 2018 Toyota Tundra and provides you with both the 4-Way and 7-Way like what originally came on your pickup.
Attached is a review video for you to check out. view full answer...
The Sidewinder pin boxes we offer that are designed to replace your Venture CJ20517 are both rated for 16,000-lbs. The # ST400-SW19K is not a fit for your trailer.
I recommend the Sidewinder 5th Wheel King Pin with Rotating Turret, part # RP61450. This pin box moves the pivot point 22 inches toward the rear so you can execute sharper turns with a short-bed truck. The # RP61450 does have a 16,000-b weight capacity. I did some research and with the weight of your trailer being about 8400-lbs,... view full answer...
If you have the Westin E-Series Round Nerf Bars # 23-2400 then the Replacement Mounting Hardware Kit for Westin E-Series 3" Round Nerf Bars # 23-240PK will be the kit that you need. view full answer...
We do offer a replacement 4-Way/7-way trailer socket for your 2013 Toyota Tundra with factory tow package. Curt # HM40975 is the specified replacement part for your truck. This uses a standard round U.S. Car Connector, the same type as used on the Pollak # HM40975 that you referenced.
The linked photo and video show this connector type which plugs in to the mating connector on your Tundra. view full answer...
The correct replacement tarp for your Extang Trifecta Tonneau cover model 44801 is the Replacement Tarp for Extang Trifecta Soft Folding Tonneau Cover # EX33FR. view full answer...
The discontinued Extang Trifecta Soft Folding Tonneau Cover 44801 does fit a 2008 Toyota Tundra Short bed like yours so as long as that is the cover you have installed, the Replacement Tarp # EX33FR is the correct replacement.
If you find you have a different model cover just let me know. view full answer...
I checked with my contact at Lippert and they were able to confirm that the replacement awning arms for your Solera Hybrid 69" Awning # LC725517 are going to be the Solera Universal Awning Support Arms for RVs - Hybrid # LC434727 .
If you've got a different model awning that the part number I mentioned, please let me know and I can recommend the appropriate replacement arms. view full answer...
I contacted the manufacturer for you and was able to find the replacement cover you need for your 2005 Toyota Tundra. The replacement Truxedo Edge Soft, Roll-up Cover is # TX8451-CVR. view full answer...
We do offer just the replacement tarp portions of the various tonneau covers from TruXedo and others that we offer for your 2007 Toyota Tundra Crew Max. In order to find the correct replacement tarp you'll want to confirm which series of Truxedo cover you have.
You can use the linked page to select your bed length and configuration. Once you choose you'll then see the covers that fit. Select the brand Truxedo by clicking on that filter and then select the specific cover series you have.
For... view full answer...
The best way to find the correct bearings, races, or seals for your trailer is to remove a wheel and hub and get the numbers off of the current components you have.
If you are unable to fid the numbers on the bearings or seals or races, you can use a digital caliper to measure the areas on the spindle of your trailer. I have attached a drawing that shows where the numbers can typically be found on the components and where you would need to measure if you are unable to find the numbers.... view full answer...
Weight distribution system heads are HEAVY. The only solution out there that can help somewhat is the HitchGrip Carrying Tool for Weight Distribution Head Assembly # 303-HG-712 which basically grabs the ball and gives an easier handle to grab onto. It looks like in your picture I can see you have already tried this though since I see packaging for it.
I know space is typically a premium when camping but maybe a small wagon could help you get the head around and then you could use the... view full answer...
The Replacement Mounting Bracket # HM40978 is the only bracket we have to fit the Hopkins 7- and 4-Pole Trailer Connector Socket that you have on your 2013 Toyota Tundra.
As the bolt holes will not match what you have the No-Drill Mount Bracket # 18136 can be used to secure the connector to the receiver without drilling. view full answer...
The Replacement Tarp for Extang BlackMax Soft Tonneau Cover # EX1540 for the Extang BlackMax Soft Tonneau Cover # EX2540 (DISCONTINUED) is not a fit for your 2004 Toyota Tundra.
What you're going to want, is the Replacement Tarp for Extang BlackMax Soft Tonneau Cover # EX1850 for your Extang BlackMax Soft Tonneau Cover # EX2850 (DISCONTINUED). view full answer...
It would appear you are needing the ONE LED Trailer Tail Light Driver # STL0067RPG and Passenger # STL0066RBG for your 2008 Trailstar trailer carrying your Bass Tracker 175 TXW boat. These lights both use the 3 prong plug in like you have included in the image.
Be sure to use Dielectric Grease # 11755 on the light connectors to help prevent corrosion from water. view full answer...
Unfortunately Westin doesn't have a confirmed grille guard fit or brackets for a 2001 Toyota Tundra. There is only the Ultimate Bull Bar # 32-1365 in black or # 32-1360 in chrome. The replacement hardware for those is # 32-136PK.
The # 40-090PK is the bracket kit for the # 40-0905 which is a fit only for 1998-2004 Toyota Tacoma models. Based on your Tundra photo I can only assume they used the grille guard and altered the mounts as needed for a fit. Westin does not confirm or warranty... view full answer...
I'll start by saying that without knowing which hubs are on those axles, it's tough to know exactly which lug studs are on them, but I was able to research and determine that the studs are normally 1.8" long. Taking this into consideration, you're going to need studs that are at least 2.3" long to make up for the added space between the hub face and wheels. The Kodiak Wheel Bolts # K12WB2 are only 2" long, so these are not going to be sufficiently long enough.
I recommend using the Replacement... view full answer...