The best option to carry bike on your 2019 Toyota Prius C is a trailer hitch and hitch mounted bike rack. Both hitch options for your 2019 Prius C are Class I hitches. I recommend Draw-Tite Class I hitch part # 24971 because it does not require a stabilization strap when carrying bikes like the Curt hitch for your vehicle.
Since the only option for the Prius is a Class I hitch, you are only able to carry 2 bikes. More than 2 bikes on a Class I hitch can cause extra leverage on the hitch.... view full answer...
The part you mentioned is no longer available but there is a compatible Rhino Rack roof rack that will fit your 2014 Toyota Prius c.
What you need is the Rhino-Rack Vortex Aero Crossbars # RRVA106B-2, Rhino-Rack 2500 Series Legs # RRRLKVA and Custom DK Fit Kit # DK351. This is a locking roof rack that uses aero bars to help minimize the amount of wind noise you would otherwise encounter with square or round bars.
I have added a photo of this rack installed on a '13 Prius c to give you... view full answer...
We don't have a truck bed sliding tray that is compatible with a Prius. These are made to fit truck beds so the smallest one we have is just under 5-1/2 feet long. If you are looking for a different style of cargo tray, we have the WeatherTech Cargo Liner - Gray # WT42631 or the WeatherTech Cargo Liner - Black # WT40631. These liners will protect your cargo area and are molded to fit your 2016 Toyota Prius C. These liners are weatherproof and impact-resistant. view full answer...
As long as you have a 2" hitch receiver on your 2014 Toyota Prius c, like the EcoHitch # 306-X7194, you'll be just fine using the Kuat Transfer V2 Bike Rack for 3 Bikes # KU24FR.
The other hitches for your Prius c are rated for a Class I application so I would only stick with this in the 3-bike configuration and avoid using the add-on to convert this into the 4-bike carrier.
Attached are review videos for both the EcoHitch and the Transfer V2 bike rack. view full answer...
For your 2012 Toyota Prius c you can use Rhino-Rack roof rack # RRVA106B-2 with leg kit # RRRLKVA. You will also need custom clamp kit (fit kit) # DK351. view full answer...
Yes, the Rhino-Rack Vortex Aero crossbars # RRVA106B-2 will fit your 2012 Toyota Prius C. For the complete roof rack, you will also want the 2500 Series Leg Kit, # RRRLKVA and the Custom DK Clamps and Pads, # DK351.
I recommend checking your owners manual to verify the weight capacity of your vehicles roof before loading any cargo on the roof rack. The Vortex Aero crossbars have a maximum weight capacity of 165 lbs, but the weight capacity of your roof is likely lower. view full answer...
Yep, you sure can; there is only one trailer hitch made for your 2013 Toyota Prius c that has a 2 inch receiver, which is made by EcoHitch and is the following part number:
- EcoHitch Hidden Trailer Hitch Receiver # 306-X7194 view full answer...
Based on the bearing sizes # 25580 and # LM67048, there are two possible hubs that will fit.
The first has a wheel bolt pattern of 6 on 5-1/2 and fits axles rated for 5,200 lbs to 6,000 lbs. This hub can be purchased with the standard hub assembly # 8-213-5UC1 or the E-Z Lube axle hub assembly # 8-213-5UC1-EZ. Your bearing combination indicates that your axle capacity is 5,200 lbs.
The other hub option has a bolt pattern of 6 on 6 and fits axles rated for 6,000 lbs. This hub can be... view full answer...
The EcoHitch Hidden Trailer Hitch Receiver # 306-X7194 for your 2015 Toyota Prius c has a 2" receiver that we measured to have a hitch height of 11-1/2". With this you can use either a fixed ball mount like the Curt # C45100 that has a 6" rise which would fit on a trailer with a hitch height near 15-1/2". You will need either a 1-7/8" # C40002 or 2" # 40038 ball.
If you intend to pull different trailers that can have different hitch heights an Adjustable Ball Mount # BWTS10038B will allow... view full answer...
I am sorry to say that the Thule Wingbars are not compatible with Rhino Rack and Yakima towers. Roof rack manufacturers make their parts to only be compatible with their product line, so if you have Thule bars, you will need to use Thule towers and fit kit as well.
I see that you were looking at parts for a 2016 Toyota Prius C. Unfortunately, we do not offer a Thule fit kit for your vehicle at this time. So your best bet would be to go with a full Yakima or Rhino Rack setup. Personally,... view full answer...
We do have everything you need for your 2014 Toyota Prius c to tow a small trailer, which is a hitch, wiring harness, ball mount, and hitch ball. I'll make a list for you of all the parts:
- Draw-Tite Trailer Hitch Receiver # 24971
- Curt T-Connector Vehicle Wiring Harness # C56275
- Draw-Tite Drawbar # 3593
- 1-7/8" Hitch Ball # 19256 or 2" Hitch Ball # 19258
The hitch ball size will depend on the size of your trailer's coupler, but it will likely be 1-7/8" since it is a small trailer.... view full answer...
We checked with Thule and the Passage trunk rack part # TH910XT that you referenced is a confirmed fit. With this trunk rack, and all trunk racks in general, you can't open the rear door when the bike rack is installed. Reason is the the struts that hold the rear door open are can't handle the weight of the rack and the clips for the rack will most likely prevent the door from opening without it binding up.
If you plan on carrying any womens or alternative framed bikes without horizontal... view full answer...
The Thule OutWay 2 trunk-mount rack # TH45JV is a solidly-built quality unit whose sturdy construction results in about a 19-lb weight. On smaller and lighter vehicles like your Prius C the sheet metal may not be strong enough to handle this weight along with the weight of your loaded bikes. This is why this carrier is not recommended for your car.
We do offer other trunk racks whose lighter weight makes them a better choice. The link provided will let you select the version of the Prius... view full answer...
The Draw-Tite Sportframe Trailer Hitch Receiver part # 24971 while installed on your 2015 Toyota Prius c with the Kuat Transfer 2 Bike Platform Rack part # KU74FR will work together on your Prius just fine. The bike rack is also rated for use with a Class I hitch like the one listed above.
I have attached a review video of the bike rack for you as well. view full answer...
The difference between the # TCMA1 and # TCMA2 is the size and type of vehicle that they're designed for. The # TCMA1 is designed for passenger vehicles with wheels between 13"-20", where the # TCMA2 is designed for light trucks and SUVs that have wheels 14"-24" tall. There is no difference in quality, just a difference in the size and types of tires they're used on.
If you're using these on chains for your 2014 Toyota Prius c, you'll want to use the # TCMA1. view full answer...
The Inno Ridge Rooftop Cargo Box # INBRA220R-BK fits a crossbar spread of 20" - 30" which means you will need to use a Rhino-Rack roof rack since it fits within that range for your 2016 Toyota Prius C.
I recommend going with the Vortex roof rack system since it uses aero-style bars that will help to cut down on wind noise and drag:
41" Vortex Crossbars - Black # RRVA106B-2 or Silver # RRVA106S-2
2500 Series Legs - # RRRLKVA
Fit Kit - # DK351 view full answer...
The Curt T-Connector Vehicle Wiring Harness # C56275 has been determined to fit the 2015 Toyota Prius C.
I have attached a review video of this product for you. view full answer...
To a tow a trailer with your 2014 Toyota Prius C you're going to need a trailer htich. I recommend the Draw-Tite Sportframe Class I Trailer Hitch Receiver # 24971. This hitch has a 2,000 pound maximum towing weight can requires no drilling to install.
To power your trailer's lights you'll need a wiring harness. The Hopkins Simple Vehicle Wiring Harness # HM11141854 will give you a 4-way connector on the rear of the Prius. There's no need to cut any wires, this harness plugs right into... view full answer...
I spoke with my contact at Yakima and we were able to determine that each foot can travel 8 inches on the Yakima RocketBox Pro 14, # Y07192. It can fit crossbar spreads of 24 to 40 inches. Crossbar spread is measured from the center of one bar to the center of the other bar.
If your Prius does not already have a roof rack the most economical option for a nice quality is the Rhino-Rack roof rack using bars # RRVA106B-2, legs # RRRLKVA, and custom clamp kit # DK351. view full answer...
Yes, the Inno Ridge Rooftop Cargo Box # INBRA220R-BK will fit with the Rhino-Rack Vortex Crossbar system for your 2017 Toyota Prius C. You will need the following parts for the Rhino-Rack roof rack:
41" Vortex Crossbars - # RRVA106B-2
2500 Series Legs - # RRRLKVA
Fit Kit - # DK351
Attached is a sample installation video for you to check out. view full answer...
Go To Results