bing tracking image

Filter Questions and Answers:

reset filter

Expert Answers about Scion xB


  • How to Carry Three Bikes on a 2006 Scion xB
  • The reason that you will be limited to a maximum of two bikes with Curt Trailer Hitch Receiver part # C11487 is because it is only class I rated. The maximum number of bikes that you can carry with a class I trailer hitch receiver is two, no matter their weight. In order to carry three bikes on the back on your 2006 Scion xB you will need to use a trunk mounted bike rack like the Hollywood Racks Over-the-Top 3 Bike Rack part # HRF2-3. This option will not require any modifications to the...
    view full answer...

  • InSupplemental Braking System for 06 Scion XB
  • There are several differnt ways you can go with this, I will list a few and their features. The first is my preferred route providing it is in the acceptable price point. The Demco SBS Stay-IN-Play DUO Supplemental Braking System - Proportional, # SM99251. With this you get automatic, proportional braking with a system that never has to be removed, replaced, or reset. The DUO activates when your RV's brake lights go on and an inertia sensor in the towed car detects deceleration. It is...
    view full answer...

  • How Much Can Be Carried On a Cargo Carrier With a 2012 Scion xB
  • The Curt Trailer Hitch Receiver part # C12490 which is a fit for a 2012 Scion xB does indeed have a 350 lb weight capacity. However, when you use any sort of 1-1/4" to 2" hitch adapter like the Hitch Adapter 1-1/4" to 2" Trailer Hitch Receiver part # HTAD this reduces the hitch capacity by 1/2, so 175 lbs which then puts you over the limit with your hot dog cart. The only option you have to carry your hot dog cart without being overweight is to use a cargo carrier with 1-1/4" shank, the...
    view full answer...

  • Trailer Hitch and Bike Rack Recommendations for a 2011 Scion xB
  • As long as your 2011 Scion xB is not a Release model, you can use the Curt trailer hitch # 12490. This is a Class II trailer hitch with a 1-1/4 inch receiver. The bike rack you choose will need to fit in the 1-1/4 inch receiver opening. I have included a link to the installation instructions and a link to a video showing a typical installation of the trailer hitch for you. While there are some bike racks that fit on a ball mount, most bike racks actually fit in the receiver opening. For...
    view full answer...

  • Hitch and Trailer Wiring Recommendation for 2005 Scion xB
  • For your 2005 Scion xB the hitch I recommend is the Curt # C11487 which has a concealed crosstube for a more concealed look! For trailer wiring the best option is the Curt Wire Harness # C56030 which is very easy to install with plug-in connectors that match your tail light connectors. For a hitch ball you'd need just the part # A-80 and you'd be set.
    view full answer...

  • What Size Hitch is Available for 2013 Scion xB
  • For lighter duty vehicles like your 2013 Scion xB there are only 1-1/4 inch hitches available like the Curt # C12490 as the larger 2 inch size is only available for heavier duty vehicles like trucks and SUVs. You may need a new bike rack that fits this hitch size like the Hollywood Racks Trail Rider part # HR200Z which is really stable and easy to load/unload.
    view full answer...

  • Tent Rooftop Rack For 2015 Scion xB
  • Rhino Rack does not make a Pioneer Platform for the 2015 Scion xB. Yakima makes a similar 55" long x 49" wide platform, but the weight limit is 165 pounds, well under your needs. It also requires a fit kit that is not compatible with the Scion roof. Further, you will need to check your owners manual for your vehicles roof weight limit. I suspect it is below well below 165 as well. The only similar thing we offer is the Inno Roof Rack that supports 120 pounds – the most of all the Scion...
    view full answer...

  • What Parts are Needed to Flat Tow a 2009 Scion xB with Manual Transmission and No Fog Lights
  • The first thing you are going to want to do is consult the vehicle owners manual for the proper procedure on towing the vehicle. If you find that the vehicle can be flat towed you will need 5 items. First, you will need base plates. These provide a safe and secure attachment point on the vehicle for a tow bar. For your xB without fog lights, you would need Roadmaster base plates, # 1187-1A. I have included a link to the installation instructions for you. Next, you will need a compatible...
    view full answer...

  • Parts Needed to Flat Tow a 2012 Scion xB Behind and RV
  • To flat tow your 2012 Scion xB behind an RV you will need the base plates and tow bar like you mentioned as well as safety cables, lighting, and supplemental braking. For a tow bar compatible with Roadmaster base plates # 1187-1A (with arm height at approximately 13 inches) I recommend the Falcon 2 # RM-520. This tow bar makes hooking up and disconnecting easier when you are not on perfectly level ground or straight. I have linked a video review for you. The video explains how the tow...
    view full answer...

  • Why Does Trailer Wiring for 2005 Scion xB Require Taillight Converter
  • So trailer wiring has the turn signals and the stoplights on the same circuit and the running lights on another. Some vehicles are wired like this too but some are also wired where the blinker is on a separate bulb from the brake lights. So the convert the separate style to a combined style a converter box is needed. That's what comes with the trailer wiring harnesses that fit your 2005 Scion xB like the Tekonsha part # 118414 which is a confirmed fit and the best option as it installs...
    view full answer...

  • How Can I Haul 2 Ebikes With A Class II 1-1/4 Hitch On A 2015 Scion XB?
  • If you are wanting to carry your two 60 lb ebikes on your 2015 Scion XB you need to get the Class II hitch from Curt # C12490. This will give you the most amount of weight capacity. The Thule T2 Pro XT # TH83JV needs to be used with a class III hitch and has a wheel hook which isn't designed to work for bikes with fenders. There is no Class III hitch option for your Scion so we will need to find a more suitable option. We need an option that does not require a hitch adapter because when...
    view full answer...

  • Recommended Fairing for Rhino-Rack Vortex RS Roof Rack on 2011 Scion xB
  • For the Rhino-Rack Vortex RS 2500 Roof Rack RRRS232B on your 2011 the 44 inch Fairing # RRRF3 will work perfectly. This will just about span the entire length of the flush-mount crossbars on your Scion xB and their mounting clips will fit nicely between the crossbar mounting feet on the roof. This will do a really nice job of further reducing any wind noise and drag during travel. I have attached a short video demonstration that you can check out as well.
    view full answer...

  • Recommended Tire Chains for 2006 Scion XB
  • Before purchasing or using snow chains, you will want to make sure that your owners manual does not prohibit the use of chains. Assuming that your XB has 185/60-15 tires, you have several choices. If you are only purchasing the chains for this one particular trip, you might want to go with a more basic set of chains, like the Glacier Square Link Snow Tire Chains, part # PWPLC1126. As you move up in price, the chain sets are easier to install. The Thule Standard Tire Chains, part # TH01221065...
    view full answer...

  • Wiring a 2009 Scion xB to Tow an Aspen Trailer with 6-Way Connector and Separate Turn/Brake Lights
  • First, you will need to add a 4-Way trailer wiring harness on the 2009 Scion xB. You can use # 118468, that you have referenced. The rest of the installation will require a little hardwiring since trailers towed by passenger vehicles normally have combined stop and turn signals. What you will need to do is cut off the 4-Way plug after installing the wiring harness on the vehicle. This will leave you with a white wire, a brown wire, a green wire, and a yellow wire. You will need to use...
    view full answer...

  • Hitch for 2008 Scion xB for Carrying Bike Rack
  • For lighter duty vehicles like your 2008 Scion xB we only have the 1-1/4 inch size available like with the Curt # C12490. For larger vehicles there are 2 inch hitches but they generally are larger ones with higher capacities. You might also consider a hitch bike rack compatible with this size like the Hollywood Racks Trail Rider # HR200Z.
    view full answer...

  • Trailer Hitch Recommendation for a 2009 Scion xB
  • When there is an option always go for the highest Class hitch for any given vehicle. A higher class hitch will allow you more options for accessories like bike racks and cargo carriers in addition to greater towing capacity. For a 2009 Scion xB we have Class II trailer hitch # 12490. The towing capacity of the hitch is 350 pounds tongue weight and 3,500 pounds gross trailer weight. I have included a link to the instructions and a video for you. The towing capacity of a vehicle can change...
    view full answer...

  • How Does LED Clearance Light part # STL79RB Wire to Trailer Wiring that Uses 2 Wires
  • Your current taillights are grounding through the mounting hardware which is why there's on two wires and the LED Clearance light part # STL79RB instead grounds with the included white wire. So what you'd need to do is run the white wire to the mounting hardware of your trailer frame and you'd be set. Or you can run the white wire back to the ground circuit of the trailer's wiring.
    view full answer...

  • Recommended Trailer Hitch And Cargo Cargo Carrier For 2014 Scion xB
  • It sure looks like you have been doing your homework. The Curt trailer hitch, part # C12490 is the hitch designed to fit your 2014 Scion xB. This is a Class l trailer hitch with a 1-1/4 inch receiver opening. And the note from Curt states that all non-trailer loads - bike racks, cargo carriers and so forth - should be supported with stabilizing straps like part # 18050. Failure to properly support these loads will void your hitch warranty from Curt. This is a simple no-drill installation...
    view full answer...

  • Inno Square Bar Roof Rack and Fairing that Fits 2005/2006 Scion xB
  • The correct parts needed to install an Inno roof rack on your 2006 (or 2005) Scion xB would be part # INB137, # INSUT, # INK263. Then for a fairing you would need the # INA262 and you'd be set.
    view full answer...

  • Roof Rack, Cargo Basket, and Roof Bag Recommendation for a 2012 Scion xB
  • For an affordable roof rack confirmed to fit your 2012 Scion xB that is arguably just as good as the really expensive kits you would want the Rhino Rack Roof Rack that consists of part # RRVA137B-2, # RRRLKVA, and # DK152. With these two part numbers you would have everything needed for a roof rack. Crossbars and mounting kit is included. For a cargo basket you could go with the Curt Basket part # C18115, and then for a bag part # RL100A20. I attached a review video for both products for...
    view full answer...