We have three wheel liners that sound like what you may have on your Monaco. You'll need to make sure they fit the rims you have before purchasing.
# NA226H40N for 22-1/2 by 6-3/4 inch rims
# NA227H40 for 22-1/2 by 7-1/2 inch rims. Direct fit on Accuride wheels 29028.
# NA228H40N for 22-1/2 by 8-1/4 inch rims. Direct fit on Accuride wheels 28484.
All three models are 8 lug, hub-piloted liners with 4 hand holes.
To measure your the width of your wheels you need to measure from bead... view full answer...
If your Holiday Rambler Endeavor has leaf springs, you will want to use part # RM-RBK8. If your Holiday Rambler Endeavor has airbags, you will want part # RM-RBK6. These brackets will work with your motor home and the Roadmaster Reflex Steering Stabilizer # RM-RSSA. view full answer...
Your 2004 Holiday Rambler Endeavor Class A motorhome is based on the Roadmaster RR8R-series chassis and according to the specs in the owner's manual the RV comes with a factory hitch and factory 6-way wiring.
In this case you can use an adapter to give you a 4-pole trailer connection. The linked page displays several such adapters including Hopkins Endurance Flex Trailer Connector Adapter # HM47320. view full answer...
There won't be a way to retrofit old incandescent lights to work with LED lights, so you will need to replace your existing lights. I also am not able to cross reference any of the part numbers you mentioned, but the dimensions are helpful.
Something like the Opti-Brite LED RV Dome Light - 880 Lumens - Flange Mount - Rectangle - Clear Lens # ILL10CCB you were looking at might be a good option to replace the larger light since they're similar sizes, but it does not have an exterior switch... view full answer...
As long as your Holiday Rambler doesn't have the Dana Spicer front axle, the # RM-RBK6-RSSA you'd looked at would be a fit. If you have the straight leaf spring axle, you'd use # RM-RBK8-RSSA. view full answer...
I have a solution for you, but there won't be a plug and play harness to install a brake controller on your 2006 Monaco Knight; you can certainly hard wire one in though. I recommend using the Tekonsha Prodigy P3 # 90195, which will give you responsive proportional braking for your towed trailer.
In order to install the P3 via hard wire I do recommend testing a few of those wires with a circuit tester like the # PTW2993 to confirm their function-namely the 196 and 197 wires. The 197 wire... view full answer...
I assume your 2002 Holiday Rambler Endeavor already has a 6-pin wiring harness in the back so you will need to cut that and connect it to the Universal Brake Controller Wiring Kit # ETBC7 using a circuit tester such as # PTW2993 to test the functions. You will also likely need extra wire # 10-2-1 and butt connectors # DW05745-10 for this installation. I have added links for you to help articles on trailer wiring and brake controller installation which details the process for you.
As for... view full answer...
It sounds like you need seal # 168233 which has an inner diameter of 1.688 inches and outer diameter of 2.332 inches. Very close to your measurements.
Check your bearing and race numbers. If you have bearing # L68149 along with race # L68110 then this is generally the seal you need. view full answer...
The 2006 Monaco Diplomat 40 PDQ Class A Motor Home that you have will use the Roadmaster chassis. You will need to determine which Roadmaster chassis is used on your motor home to choose the correct RSSA steering stabilzer and brackets.
The Roadmaster Reflex Steering Stabilizer with Mounting Brackets, part # RM-RBK8-RSSA, that you have referenced will fit the 2000 to 2009 Roadmaster Motorhome Class A with straight axle, leaf springs, and 1-1/4 inch, 1-1/2 inch, or 1-3/4 inch tie rod.
The... view full answer...
Go To Results