Expert Answers about Roadmaster Monaco
- Roadmaster Reflex Steering Stabilizer for 2001 Holiday Rambler Ambassador on Roadmaster RM4C Chassis
- As long as your Holiday Rambler doesn't have the Dana Spicer front axle, the # RM-RBK6-RSSA you'd looked at would be a fit. If you have the straight leaf spring axle, you'd use # RM-RBK8-RSSA.
view full answer... - Recommended Brake Controller for 2006 Monaco Knight RV on Roadmaster Chassis
- I have a solution for you, but there won't be a plug and play harness to install a brake controller on your 2006 Monaco Knight; you can certainly hard wire one in though. I recommend using the Tekonsha Prodigy P3 # 90195, which will give you responsive proportional braking for your towed trailer.
In order to install the P3 via hard wire I do recommend testing a few of those wires with a circuit tester like the # PTW2993 to confirm their function-namely the 196 and 197 wires. The 197 wire...
view full answer... - Recommendation For Roadmaster Reflex Steering Stabilizer and Brackets For 2006 Monaco Diplomat
- The 2006 Monaco Diplomat 40 PDQ Class A Motor Home that you have will use the Roadmaster chassis. You will need to determine which Roadmaster chassis is used on your motor home to choose the correct RSSA steering stabilzer and brackets.
The Roadmaster Reflex Steering Stabilizer with Mounting Brackets, part # RM-RBK8-RSSA, that you have referenced will fit the 2000 to 2009 Roadmaster Motorhome Class A with straight axle, leaf springs, and 1-1/4 inch, 1-1/2 inch, or 1-3/4 inch tie rod.
The...
view full answer... - Replacement Interior LED Lights for 2007 Roadmaster Monaco
- There won't be a way to retrofit old incandescent lights to work with LED lights, so you will need to replace your existing lights. I also am not able to cross reference any of the part numbers you mentioned, but the dimensions are helpful.
Something like the Opti-Brite LED RV Dome Light - 880 Lumens - Flange Mount - Rectangle - Clear Lens # ILL10CCB you were looking at might be a good option to replace the larger light since they're similar sizes, but it does not have an exterior switch...
view full answer... - Correct Grease Seal for Boat Trailer
- It sounds like you need seal # 168233 which has an inner diameter of 1.688 inches and outer diameter of 2.332 inches. Very close to your measurements.
Check your bearing and race numbers. If you have bearing # L68149 along with race # L68110 then this is generally the seal you need.
view full answer... - Wheel Liners with 8 Lugs and 4 Hand Holes to Fit 22-1/2 Inch Wheels
- We have three wheel liners that sound like what you may have on your Monaco. You'll need to make sure they fit the rims you have before purchasing.
# NA226H40N for 22-1/2 by 6-3/4 inch rims
# NA227H40 for 22-1/2 by 7-1/2 inch rims. Direct fit on Accuride wheels 29028.
# NA228H40N for 22-1/2 by 8-1/4 inch rims. Direct fit on Accuride wheels 28484.
All three models are 8 lug, hub-piloted liners with 4 hand holes.
To measure your the width of your wheels you need to measure from bead...
view full answer...
Go To Results