I have a solution for you, but there are two issues here; the Curt Q-25 # C97FR is designed to fit in the OEM prep package for Chevy/GMC trucks and typically a non-sliding hitch is only recommended for trucks with 8 foot long beds. If you've determined that your trailer is configured in such a manner that it won't contact the cab of the trailer when making turns and you've got an OEM prep package you can use the # C97FR.
However, you've indicated that you don't have the OEM prep package... view full answer...
The etrailer Trailer Hitch Receiver # e98853 you were looking at will not interfere with the backup sensors in the rear bumper of your 2012 Toyota Sienna due to the majority of the hitch installing behind the bumper leaving only the receiver visible as you can see in the included picture.
The only scenario that would cause the backup sensors to go off is if you had an accessory like a bike rack or cargo carrier in the hitch, or when you are towing a trailer, but this would only cause the... view full answer...
The H13 LED Headlight Bulbs with Anti-Flicker Harness part # ARC57VR will work as both a high beam and low beam bulb. That said, you would need one kit for the low beam and one kit for the high beam if you were to do both. I have attached a photo below with the required bulb orientation. view full answer...
The Yamaha 2200iS generator is too long to fit into the TorkLift Lock and Load SideKick Cargo Tray # TLA7901. It is nearly 22 inches in length, which is longer than the 21-1/4 length of the inside of the SideKick tray.
The Yamaha generators that will fit this tray are the Yamaha EF2400iSHC and Yamaha EF2000iS generators.
I have added links below to a couple video reviews for you to check out as well if you'd like of the TorkLift Lock and Load SideKick Cargo Tray # TLA7901. view full answer...
I spoke with Dexter and the Airstream Flying Cloud 30RBT uses a Dexter Torflex #11 Axle so you need the Torflex Lift Kit part # K71-724-02. view full answer...
Yes. Brake controllers are fairly universal, so you can use the RedArc Tow Pro Liberty # RED24FR in your 2018 Nissan Titan. I recommend adding the # RED39FR to make this a plug and play installation and avoid hard wiring into the vehicle wiring. view full answer...
After looking in the owners manual for your 2009 Chevrolet Silverado it mentions that tire chains should not be used with your 265/65R18 tires as there is not enough clearance between the tire and suspension/body components. Using tire chains could cause damage to suspension or body components of your truck.
Should you decide to use tire chains anyways, for your 265/65R18 tires the Glacier V-Bar Snow Tire Chains with Cam Tighteners # PWH2828SC have the V-Bar construction you are looking... view full answer...
The Convert-A-Ball Cushioned 5th-Wheel-to-Gooseneck Adapter part # CAB-C5G will work with the B&W Ball and Safety Chain Kit part # BWGNXA2062 since there is no level built into the hitch ball head. view full answer...
For your 2001 Volvo V70 Wagon I suggest the Curt Class 2 Trailer Hitch Receiver Item # C12318. Although it is a 1-1/4" hitch, you will be able to use your 2" accessories and bike rack with the use of a hitch adapter. This hitch provides a tongue rating of 350 pounds. This rating is the amount of weight that will be loaded and forced downward onto the receiver.
Currently for your vehicle there are not any options for a 2" hitch. There could be a couple of factors for this. The sizing of... view full answer...
Yes. In order to install a trailer hitch like the etrailer # e98848 you will need to remove any tow hook that might be attached to the rear frame stanchions. It isn't uncommon for SUVs that don't come standard with a hitch come with some sort of recovery point, and they're typically able to be removed by un-doing a few bolts. This hitch has a 2" receiver that's perfect for carrying bike racks or towing a small trailer. It looks like you were looking at bike racks as well, so I've linked... view full answer...
The Thule Prologue Roof Mounted Bike Rack that you referenced will work with the Thule Aero crossbars with the XADAPT9 load bar adapter, Part # THXADAPT9.
This adapter comes with a curved metal bracket for the rear crossbar and two square head bolts that go into the top channels of the front crossbar. There are two nuts that secure the front of the bike rack to the two square bolts.
Further instruction detail can be sourced on the product page that I have added below. view full answer...
The inflation valve if faulty can be replaced with the Firestone Inflation Valve for 1/4" Tubing part # F3032-1. If you have a valve core removal tool you can make sure the stem inside is tight. It could be a failed o-ring on this component depending on where the leaks are coming from. view full answer...
The Rampage # RA39923 center console you'd looked at is specifically designed for minivans, but it isn't a vehicle specific item so Rampage doesn't list specific vehicle fits. If you have have a 9 inch wide, 29 inch long space available between your seats, there's no reason why it wouldn't work well for you.
I've linked to a demonstration video and a video showing a typical install. view full answer...
The correct Westin HDX Grille Guard with Punch Plate for a 2016 Ram 1500 is part # 57-3540. The Westin HDX Grille Guard with Punch Plate part # 57-3550 is for 2500/3500 models and will not work on the 1500. The grille guards for the 1500 and 2500/3500 models are not cross-compatible. view full answer...
Cables instead of chains are a good idea if you don't plan on using them often, or have them "just in case" because they are a more economical option, and I can confirm for you that the Glacier Cable Snow Tire Chains # PW2029C you asked about do fit your 245/55-19 tires.
Tensioners will give you a nice tight fit, and for an economical option that will work I recommend the Glacier Rubber Adjusters # PW99.
I have added a link below to a video review for you to check out as well of the Glacier... view full answer...
It's a good idea to check to ensure you get the right fit, and I can confirm for you the correct Blue Ox base plate and Blue Ox tow bar fit for your 2012 Ford F-150. The exact parts you need are going to depend on the model of your F-150 and if you have the EcoBoost engine or not.
- With EcoBoost Engine - FX2, FX4, Lariat, Platinum, XL, XLT: Blue Ox Base Plate Kit # BO74FR
- Without EcoBoost Engine - Harley-Davidson, STX, XL, XLT: Blue Ox Base Plate Kit # BX2606
- With or Without EcoBoost... view full answer...
We have a gooseneck for your 1997 Chevrolet C/K Series Pickup!
I recommend the B&W Turnoverball Underbed Gooseneck Trailer Hitch, part # BWGNRK1104. This is compatible with all bed models of your pickup.
It has a 7500-pound vertical load limit and a 30,000 towing capacity. I've linked to a video review of this gooseneck hitch for you to look at. Some drilling will be required in your bed. view full answer...
Yes. A 195/75r14 tire will work on a wheel like the # AM20354 just fine since it's 6" wide. The Karrier ST205/75R14 Radial Trailer Tire with 14" Galvanized Wheel - 5 on 4-1/2 - Load Range C # AM32156 is a slightly wider tire on the same wheel, for reference. view full answer...
There are two available trailer hitch options for a 2011 BMW X5, the Draw-Tite Max-Frame Trailer Hitch Receiver part # 75600 and Curt Trailer Hitch Receiver part # 13077. I recommend the Curt Trailer Hitch Receiver but they are admittingly very similar.
There are no options from EcoHitch unfortunately. view full answer...
Go To Results