The Replacement Lead Jack w/ Drop Leg # LG-179013 will work based on the helpful measurements you have given. The leg length is also 29-1/2" with a distance from the top to the closest weld stop measuring 6-3/4" and from the bottom to the closest weld stop measuring 5-1/4" These have a weight capacity of 4,000 lbs and have mounting locations for a motor.
I have attached a diagram showing the measurements as well as a review video for your reference. view full answer...
Based on your description it sounds like you need a replacement motor for your landing gear. The correct replacement for your 1RV-200 is the # LC142178. If you need a replacement gear box as well then you can use the # LC276602. view full answer...
If it has recently slowed down there may be a weak battery or wiring issue that you need to look at. After confirming your battery has a good charge. Check the connections either the connectors are corroded and not making good contact or the wiring has been compromised. If the wiring is in good shape and the connections look good then the motor may very well be going bad. The gear box will slip and clang and even produce a ratcheting sound but really doesn't effect speed. It just goes or... view full answer...
I checked the microwave/exhaust fans that we carry as well as our vendors, Way Interglobal and Furrion, and all the combos I can find are all at least 29" wide.
If you have more available room I recommend the Furrion # FMCM15SS. The dimensions on this microwave/exhaust fan is 29-15/16" wide x 16-3/8" tall x 15" deep, so it will be larger than your current unit. view full answer...
Go To Results