The Rhino-Rack Locking Ski and Snowboard Carrier # RR576 is intended to fit a wide range of factory and after-market roof rack crossbars, including various square, aero and elliptical shapes. According to the folks at Rhino-Rack the attachment hardware included with this carrier can fit crossbars up to 3-1/2-inches wide.
Just to give you a better confirmation of their crossbar size range I pulled a set from inventory to measure the mounting hardware. The hardware will accommodate roof... view full answer...
I checked with Yakima and they do list the LoadWarrior cargo basket # Y07070 as a fit on the factory crossbars on your 2001 Nissan Xterra. The replacement hardware is no longer available, but we do have the locking version, # Y07064, sold in pairs. The locks/keys are not included so you would need to order them as well using # Y07202, if you wanted the locking version. view full answer...
Yep!
Hitches like the etrailer # e56KR fit 2000 - 2004 Nissan Xterras, so you'll have no problems.
Keep in mind hitch hardware is one time use due to to stretching when torqued down, so you'll need to know the brand and model number of your hitch so you can order new hardware # RHK. view full answer...
If your 2004 Nissan Xterra did not come with a trailer hitch then most likely it would not have came with the plug for the trailer wiring harness either but you can check this pretty easily by just taking a look under the bumper on the driver side for the four pin connector which you can see in the attached video. If you have this then great, you can use the Tow Package Vehicle Wiring Harness part # 118244 for a plug and play install but if you do not you would need to use the Upgraded... view full answer...
Yes the Erickson Lift Sling part # EM02000 that you referenced does fit your 2020 Kawasaki STX-160. It has the weight capacity for the PWC and also has a clamp system that is perfectly compatible as well. view full answer...
After speaking to my contact at Thule, I have found the Thule MOAB Rooftop Cargo Carrier # TH690 is a good fit for your 2006 Nissan Xterra and will not interfere with your rear hatch. The mount brackets for this product work for racks up to 4 inches wide and fits a minimum crossbar spread of 16 inches and a maximum crossbar spread of 28 inches. The weight capacity is 165 lbs but be sure to check your vehicles owners guide to ensure that weight is not higher than your vehicles roof capacity.
Just... view full answer...
Yes, the SumoSprings Solo Custom Helper Springs # SSR-210-40 will work just fine with your 2008 Nissan Xterra because all these do is replace the factory bump stops. If the space between the frame and axle has increased because of the lift, then all that would change is the springs wouldn't engage as soon. view full answer...
We do have some kayak carriers that will fit the OEM roof rack on your 2008 Nissan Xterra but the clamp system on the Thule Hull-A-Port Aero # TH849000 won't be able to install on the larger crossbars.
A similar system from Yakima is the JayLow # Y04073 and it has been confirmed to fit. I have attached a review video of this for you to check out.
If you are brand loyal and want to stick with Thule then the following has been confirmed to fit your OEM roof rack:
DockGrip - # TH895
DockGlide... view full answer...
If you have factory crossbars currently on your 2000 Nissan Xterra, the Curt Basket # C18115-117 will work as long as your crossbars do not exceed 3" wide x 1-5/8" tall. In order to know for sure, I recommend measuring the width and height of your crossbars. Also, you will need to determine if your crossbars are adjustable in order to accommodate the required crossbar spread of 22"-50". The way to do this is to simply measure the space between your crossbars at different adjustable points.... view full answer...
To install the Thule Pulse XL Cargo Box, item # TH615, on the roof of your husbands 2005 Nissan Xterra, he will also need the Thule Evo Raised Rail Feet # TH710401, 53" WingBar Evo Crossbars # TH711420, as well as locks # TH450400. This cross bar kit will provide an attachment point for the Quick Grip mounts that are included with the cargo box.
Another option would be to use a Yakima cargo box that will attach directly to the factory cross bars on the 2005 Xterra. We have several to choose... view full answer...
The Tow Package Vehicle Wiring Harness # 118244 that you referenced is designed to fit 2000-2004 Nissan Xterra's so it should work well on your 2002 model.
I attached an install video for this product for you to check out also. view full answer...
The draw bar on the Roadmaster MX Base Plates, # RM-344-3B, for your 2008 Nissan Xterra measures 1-1/2 x 1-1/2 inches square.
However, this product is designed for only for use in flat towing applications. Any use other than flat towing will void warranty and may damage both base plates and your vehicle. view full answer...
Based on the dimensions you mentioned the correct Dexter EZ Flex kit you would need is the part # K71-654-00 which is compatible with what you have and will do a great job improving ride quality. view full answer...
For your 2015 Nissan Xterra pulling a Rockwood pop Up Camper, I recommend the VueSMART RV and Trailer Backup Camera Item # HM34FR. Since you are wanting it to work with your cell phone, you are going to be limited on what cameras are available. With the VueSmart, it is a universal mount so it can be mounted on the back of the trailer and it only requires a connection to an existing running light signal so it is easy to install and set up. It is also water proof, has night vision and 150... view full answer...
Although they haven't been tested as a fit together, I don't think that the Aries Grille Guard # AA9048 would be compatible with the hood bug deflector on your 2005 Nissan Xterra. If you check out the linked installation instructions you can see that there is a bracket that is installed under the hood.
Since the grille guard will be covering the bug deflector in the first place I would just remove the bug deflector if you are really wanting the grille guard. view full answer...
If your 2013 Nissan Xterra came with a factory installed 7-Way trailer connector then yes, connector # 3050-P is the correct one for your vehicle and brake controller.
If the Xterra does not have the factory 7-Way or any trailer connector then you will need to add one. First you will need to install a 4-Way, # C56225. If the vehicle already has a 4-Way you can skip this step. Then you will need to add the 7-Way by using the 4 and 7-Way installation kit # ETBC7. I have included some links... view full answer...
I was able to look online and managed to find some photos of the mirrors on your Xterra from several angles. It appears that the back of the mirror is flat enough so that the K-Source Universal clip-on mirror # KS3891 should fit just fine.
I have linked you to a product demonstration video featuring the K-Source Universal Clip-On mirror. view full answer...
I spoke with my contact at Thule and they confirmed that the Thule Canyon Roof Cargo Basket # TH859XT that you referenced will be a fit for your 2006 Nissan Xterra with factory crossbars.
Because of the width of this cargo basket, it will likely sit on the outer rails of your Xterra. Based on my research, the Xterra factory crossbars are just over 32 inches long, and the Canyon basket is 40 inches wide. With the basket sitting on the outer side rails, you may need to use the longest U-bolts... view full answer...