The Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" # 13199 is a confirmed fit for your 2009 Nissan Titan Crew Cab. The manufacturer hasn't had any issue with dual exhaust fit on this vehicle. I've attached some installation videos and the instructions to assist. Tow hooks if present will need to be removed for installation. view full answer...
It is not recommended to use the Andersen Ultimate adapter like part # AM3200 on truck beds shorter than 6-ft so I cannot recommend it for your 2015 Titan. If you have a gooseneck hitch in your truck, and if you did use it, you would have major issues with turns.
The best option for you is to remove the gooseneck hitch and install a stationary fifth wheel hitch, and then swap out the pin box on your trailer with a Sidewinder.
The fifth wheel hitch I recommend for your Titan is the Reese... view full answer...
Yes, Firestone Ride-Rite air bag kit # F2355 will fit your 2013 Nissan Titan 4x4. I have included a link to the installation instructions for you to view.
If you want to add an on-board air compressor I recommend Level Command kit # F2158, which will fill the bags evenly, or # F2219, which allows you to change the air pressure in each bag individually. view full answer...
For your 2018 Nissan Titan XD, there is not a confirmed fit trailer hitch receiver meaning the manufacturer has not yet tested your vehicle for a fit. I reached out to my tech contact at Curt and also did some research and have found no changes in the frame from 2017 to 2018 so the Curt # C13317 or the heavy duty # C15306 should bolt right on with no drilling required. The heavy duty hitch will sit further below the bumper as it is designed to also be compatible with the factory hitch... view full answer...
As long as you have the US Car Connector on your 2007 Nissan Titan then the Hopkins Endurance Multi-Tow Twist-Mount 7-Way RV and 4-Way Flat Trailer Connector # HM40920 will fit and work perfectly!
Some other poplar options are the Curt T-Connector # C55774 and the Hopkins # HM40975. Both of these install using the same connector as the part you mentioned. The only difference is that the Hopkins you referenced is typically if your pickup has a cutout in the bumper area (see attached photo)... view full answer...
A key element here is determining how much rise or drop you may need to level your system. Both ball mounts and weight distribution systems are made in a variety of sizes and come with what's known as rise and drop—to compensate for the height difference between your trailer and vehicle and allow for safe, level towing. With a weight distribution system like the Curt Short-Arm Weight Distribution System with Sway Control # C17422 and the lift you have due to multiple elements like your... view full answer...
We do have bike racks that will allow you to open the tailgate of your 2017 Nissan Titan, although we have not had a chance to test the Curt Premium 5 Bike Rack for 2" Hitches # C18065 on a '17 Titan to know for sure.
The only way I can guarantee you will be able to use this rack and open the tailgate is to also add the Yakima BackSwing Swing Away Hitch Extender for Bike Racks - 2" Hitches # Y02483. view full answer...
While the Replacement License Plate Light Kit for Westin Bumpers # 00007153 is not a confirmed fit for your 2005 Nissan Titan because they are designed for Westin bumpers which are not available for the 2005 Nissan Titan, we have had people in the past install these on their Titans and say that they worked.
There is not a custom fit wiring harness involved, the wiring splices into your running lights so as long as you are ok with the modifications it would require to your bumper for installation... view full answer...
I strongly recommend going with the SumoSprings Helper Springs item # SS95GR over Timbren's like item # TNRTTNB for your 4WD 2020 Nissan Titan. Both systems will support your rear end and keep your truck level while towing but you won't notice the SumoSprings when you are not towing. The Timbren's will be rough and stiffen up your suspension. You'll feel them going over every bump.
I have linked a review video below. view full answer...
The correct Pace Edwards Contractor Rig Rack for your 2005 Nissan Titan crew cab is the part # 311-CR3004, but you would still need a Pace Edwards tonneau cover with explorer series rails in order to mount the rack.
If you don't have one then I recommend the Pace Edwards Full-Metal JackRabbit Retractable Hard Tonneau Cover w Explorer Series Rails # 311-FEN6894 if you have a 5-1/2' bed or part # 311-FEN6793 if you have a 6-1/2' bed.
These tonneau covers are designed to mount by clamping... view full answer...
Since the Rightline Truck Bed Tent # RL110750 attaches to the outside of the truck bed you could still have a tonneau cover installed, you'd just have a bit less space because the cover would be using it. view full answer...
As long as you have a 5-1/2' or 6-1/2' bed on your 2013 Nissan Titan with the Utili-Track System then the BAK Revolver X2 Hard Tonneau Cover will work well for you. If you have the 5-1/2' bed you will want part # BAK39505 and if you have the 6-1/2' bed you will want part # BAK39504. Unfortunately BAK does not make the Revolver X2 Hard Tonneau Cover for a 7' bed.
I have attached a review video of this cover for you. view full answer...
You can use two # RR574F with the 59" roof bars # RRVA150B-2. The external length is 25-5/8" so two of them will fit great on the 59" bars.
The other components that you will need to complete your roof rack for your 2021 Nisan Titan are the Rhino-Rack 2500 Series Legs # RRRLKVA and Custom DK Fit Kit # DK468. view full answer...
As long as you do not go over the 500 lbs weight capacity of the Detail K2 Flip Rack Fold Down Ladder Rack, part # K2TFR150, it will be an excellent choice for you to use on your 2005 Nissan Titan Crew Cab. The K2 will hold up just fine on a 6 hour drive.
I recommend using some Tie-Downs, like part # EM04418, to help secure your canoe on top of the K2. view full answer...
I checked with Timbren for you, and while we do have a fit for a 2020 Nissan Titan with 2-wheel drive, the part # TNRTTNB is only a fit for the 4-wheel drive 2020 Nissan Titan Pro-4X.
For your '20 Titan with 2-wheel drive, I confirmed with Timbren that part that fits your truck is the Timbren Rear Suspension Enhancement System # TTORTUN4.
There will be no modifying needed, and the Timbrens will do a superb job of improve your Titan's handling and performance by supporting its suspension... view full answer...
Based on my research the Husky 7054 fits industry-standard base rails. This is exactly what will be in your 2008 Nissan Titan when you install the Curt Custom Fifth Wheel Installation Kit for Nissan Titan # C16470-204 so the hitch is absolutely compatible with these rails. view full answer...
The Timbren Suspension Enhancement System # TNRTTNB is designed to only fit a stock suspension height on your 2021 Nissan Titan.
You can use the Timbren 1" Spacer # A25723-90AH00 to space out the Timbren for the Rough Country lift since they use lift blocks to gain your rear lift and are not using new leaf springs with different characteristics. We also have the Timbren 1/2" Spacer # TA25722-90P00 that can fine tune the height if needed. view full answer...
According to Yakima, their # Y01137-Y00410 is indeed a fit for your 2007 Nissan Titan. The crossbars are 66 inches long, and have a 300 lb capacity which will allow all kinds of flexibility in carrying gear for work or play.
You can see a product demonstration video by clicking the provided link. view full answer...
Yes, a Reese 16k Fifth Wheel Hitch will install into the Curt rails that come with the Curt Rail Kit # C16470-204. This rail kit is confirmed to fit your 2011 Nissan Titan also.
I attached installation instructions for the rail kit for you to check out. view full answer...
Go To Results