Yes, we have multiple installers that we can recommend all across the country. You can find them on the product page beneath the pictures where it says locate installers near me. You will be able to put in your zip code and find multiple shops in your area. The Draw-Tite Hitch item # DT23MR you were looking at has a 4 out of 10 on our difficulty to install scale and it should take someone with experience around 40 mins to install.
I can confirm that the Draw-Tite Trailer Hitch Receiver... view full answer...
The Draw Tite hitch part # 75902 which is a fit for your 2017 Rogue will allow you to use the hands free lift gate. You will just need to kick to either side of the hitch opening. view full answer...
The Curt Trailer Hitch Receiver # C13902 is a multi fit hitch that is not designed for one particular vehicle but will fit on several models with some drilling. This particular hitch is for Chevrolet, Ford and Dodge Trucks.
I recommend the etrailer Trailer Hitch Receiver # e98846 for your 2016 Nissan Rogue. This hitch is custom fit to bolt to into the factory weld nuts that are on your Rogue. This hitch is rated for 525lbs of tongue weight and 3,500lbs or trailer weight. Be sure to check... view full answer...
Yes, the Hollywood Racks Sport Rider 2 2-Bike Carrier for Recumbents part # HR1000Z-R has an adjustable wheel mount feature that will allow you to carry 1 recumbent and 1 regular bike at the same time. Ideally, you will want to put the recumbent bike on first as this will generally be heavier than a regular bike. As long as either bike does not weight in excess of 45 lbs. and the recumbent bike has a wheelbase shorter than 74" with tire width less than 3", this bike rack will work for you.... view full answer...
The Rhino-Rack Dome 1300 Awning, # RR32125 is designed as a bolt-on mount that uses top channels in certain models of roof racks for attaching the L-brackets. See attached image.
As is, the designed mounting hardware supplied does not match this to the Rhino Rack XTray. But yes, a person can modify/custom fabricate an alternate mounting method if they choose to.
I suggest you consider the Yakima SlimShady Awning, # Y96VR. If with your XTray in place, you have enough room on cross... view full answer...
I do have a way that you can travel with 2 bikes but unfortunately there are no trunk mount bike racks that fit your 2014 Nissan Rogue SL. Instead you'll either have to use a roof mount bike rack or have a trailer hitch installed and use a hitch mount bike rack.
For a roof mount option I recommend the SeaSucker Mini Bomber Roof 2 Bike Rack # 298-BM2006 because it combines a roof rack with a bike rack. This means that it can easily be transferred to another vehicle down the road if the... view full answer...
SportRack roof rack # SR1098 square bars are 1-1/4 inches wide by 7/8 inches tall which is the same as Thule square bars. Even if they weren't the same the SUP Shuttle # TH811XT would still fit because its mounting hardware has a "universal" design to fit round, square, aero, elliptical, and most factory crossbars. I have linked a video review of the SUP Shuttle for you. view full answer...
So technically Thule says that the Gateway Pro # TH88VR will fit your 2013 Nissan Rogue but we have received a lot of feedback stating that any type of trunk mount rack that uses straps will actually damage the spoiler which is why we don't show it as a fit.
Your best options are to either go with a roof mount rack like the SeaSucker Mini Bomber # 298-BM2006 (which is a roof rack and bike rack all in one) or by installing a hitch # e98846 and using a hitch mount bike rack like the Hollywood... view full answer...
Yes, the Rhino-Rack Ski and Snowboard Carrier # RR573 that you referenced has been tested by Rhino Rack and confirmed as a fit for the factory bars of your 2016 Nissan Rogue! I attached a review video for this carrier for you to check out as well. view full answer...
Sorry to hear about your accident. For your application, I recommend going with the highest rated hitch receiver you can find for your vehicle. In our fitguide it says you have a 2016 Nissan Rogue. For that vehicle I recommend the etrailer Trailer Hitch Receiver - Custom Fit - Matte Black Finish item # e98846. You will want to verify with your owners manual what your Rogue's tongue weight capacity is, but this hitch receiver has a 525 lbs tongue weight capacity. That is the highest rated... view full answer...
The Draw Tite hitch part # 75902 uses bolt size M12 x 1.25 x 35mm CL8.8. We also sell replacement hardware kits for the hitches we offer with the part # RHK. view full answer...
The etrailer J-Style Kayak Carrier part # e98878 should work just fine on a 2018 Nissan Rogue. It fits crossbars up to 3-1/8" wide x 1-1/2" tall so there should be no issues. view full answer...
On the Yakima RidgeBack bike carrier # Y02458 it measures 10 inches from the center of the hitch pin hole to the nearest part of the rack. So based on your measurement it will stick out 2 inches past the bumper and fit your 2009 Nissan Rogue!
It is also a fit for the Curt trailer hitch, # C13204. No other parts are required for this trailer hitch, vehicle, and bike rack combination.
If you will be carrying any bikes that do not have a top frame bar that goes straight across (like a typical... view full answer...
I understand your situation, and don't worry, because I have a single bike rack solution that will handle your heavier electric bikes AND also fit in both of your vehicles' hitches.
The Thule EasyFold 2-Bike Platform Carrier # TH903202 is the perfect 2-bike rack for your requirements. It is perhaps the most thoroughly-engineering bike carrier on the market, with a mix of features that make it pretty much unmatched in terms of convenience and flexibility.
For starters, the EasyFold fits... view full answer...
A Class I trailer hitch is limited to carrying a maximum of two bikes so you will not be able to use your Thule 4-bike rack with the hitch that is currently on your 2018 Nissan Rogue; you will need a new trailer hitch.
The best trailer hitch for your '18 Rogue is the Curt # C13204 because it offers the best bumper clearance among the available hitches with a 2" receiver. The accompanying photo shows the 6 inch distance from the hitch pin hole to the edge of the bumper on a 2018 Rouge with... view full answer...
You can indeed use the Yakima # Y04073 JayLow kayak carrier on your Rhino-Rack aero-style crossbars. The carrier includes tie-down straps and bow/stern tie-downs. Adding the optional locks, # Y07202 is recommended. view full answer...
Yes, the Roadmaster Tow Dolly with Electric Brakes, # RM-2050-1 can be used to tow the 2017 Nissan Rogue. You will use the loading ramps slide to drive on to the dolly. The adjustable wheel nets fit over the tires and includes ratchets. This connects to a 2" trailer ball size on your tow vehicle. The recommended ball height is 18" - 20" so you will want a drop/rise on your motorhome that meet this requirement. Please note the linked help article how to Measure for Trailer Hitch Drop.
While... view full answer...
The Rhino-Rack Vortex StealthBar Roof Rack - Raised, Factory Side Rails - Aluminum - Silver # JA7954 does have 30-7/8" and 33-7/8" long bars, but that's only counting the useable bar space and not the total length of the bars with the mounting towers that attach to the raised side rails. I can see why this might be a bit confusing, so we do apologize for that, however this rack is a confirmed fit on the 2017 Nissan Rogue.
I've linked a review video for you to check out, as well. view full answer...
An 18 x 8.50-8 trailer tire measures 17.6" in diameter and 8.5" wide. Since the Kenda 5.70-8 Bias Trailer Tire with 8" White Wheel # AM30120 has a 4 on 4" bolt pattern it will fit your hub, but keep in mind the tire is a bit larger in diameter at 18" and is narrower at 5.9".
The other option is to use a replacement 18 x 8.50-8 trailer tire and wheel with 4 on 4" bolt pattern, the Kenda 18x8.50-8 Bias Golf Cart Tire with 8" White Wheel # AM90002.
This is a load range B tire with an 815... view full answer...
The Nissan Rogue Sport is a smaller version of the Rogue, and the two vehicle models don't use the same hitches. The # e98846 hitch you'd looked at is a fit for the Rogue, but it will not fit your Rogue Sport.
For your 2020 Rogue Sport, I'd recommend the Curt Class III hitch, part # C13377. If you'll be doing some towing with the hitch, you'll also need a trailer wiring harness like # C59236, a ball mount like # D-28 and a # PC3 hitch pin. You'll also need a 1-7/8 inch hitch ball, part... view full answer...
Go To Results