Expert Answers about Newmar

• What are Wire Gauge Requirements for Progressive Dynamics PD9200 Series Battery Converter
• Hey Jean, so in the install instructions for the Progressive Dynamics converter part # PD9280A the wiring requirements are pretty interesting. For the chassis ground wire they recommend between 6 and 12 AWG. From battery ground to converter negative they recommend between 2 and 14 AWG, and the same for the battery positive and positive lug of the converter. So if you have the minimum thickness wire already you do not need to change anything.
  view full answer...


• Correct Exact Center Steering Stabilizer For A 2018 Newmar Canyon Star 3710
• Good morning Jeff, so I double checked with Roadmaster and the Exact Center Steering Stabilizer # RM62RR (more specifically the RBK25 mounting kit) is going to be the correct fit for your 2018 Newmar Canyon Star 3710. The online user guide for your RV shows it is a 26K GVWR Ford F-series chassis with a Triton V10 engine. Per Roadmaster, the RBK25 is only for vehicles with a GVWR 24K or higher and for V10 models only. It seems like our site does not really make this clear, so I will...
  view full answer...


• Will The Buyers Products RV Side Camera Fit a 2014 Newmar Dutchstar 4369?
• The Buyers Products RV Side Camera # BP68FR will fit your 2014 Newmar Dutchstar 4369 if you have the same connector as in the image below. I have no way to look up what parts were installed on your Motorhome from Newmar as most RV manufacturers do not track the parts or make the information public.
  view full answer...


• Should Transfer Switch be Replaced at Same Time as Upgraded Converter on RV
• Hey Jean, so it really depends on the rating of your current transfer switch if you should replace it with the part # PD64FR at same time as when you install the converter part # PD9280A. The new converter is rated for up to 1,300 watts so your current transfer switch would need to be rated for at least that to get full advantage of the new converter. If not, then it would be a good idea also go with the new switch part # PD64FR which is rated for 2,000 watts.
  view full answer...


• Extended Ball Mount For Class A RV To Pull a Tow Dolly With Van
• Rather than using an Extension # e88YR you might consider using a extended ball mount. We have a couple different lengths depending on how much distance you will need to your Dolly # DM9713093. The distances listed below are from the center of the hitch pin to the center of the hole for mounting a hitch ball. 15-3/4" Ball Mount # 80232 13" Ball Mount # C45270 11" Ball Mount # 40345 If you can provide me with some more information about the length you need and what size ball your dolly...
  view full answer...


• Best Ways to Improve Ride Performance for 2011 Newmar Canyon Star 3920 Toy Hauler
• Thanks for reaching out, Blake! The best way to upgrade your 2011 Newmar Canyon Star 3920 Toy Hauler is to start off with anti-sway bars, then a steering stabilizer, and then add some suspension enhancement. Here are the parts I recommend for your application: - Front Anti-Sway Bar # RM-1139-148 - Rear Anti-Sway Bar # RM25VR (Might need square # RM-590050-00 or round # RM-590050-10 U-Bolts if factory U-Bolts can't accommodate 1/2 plate) - Steering Stabilizer (there currently aren't...
  view full answer...