We sure do!
You will need the Replacement Hardware Kit # RHK. When on the product page of the # RHK you will need to select Curt from the drop down menu, and for the hitch item number you will enter 13272.
The Curt Trailer Hitch Receiver # C13272 you mentioned is confirmed to fit the 2016-2019 Lexus RX 350 so as long as the vehicle you are installing the hitch on is one of those model years you will have no issues.
I included videos of the products mentioned for you to take a look at. view full answer...
After researching a few places, I confirmed a bulb we carry can be used a replacement bulb for that light. We carry the Replacement Incandescent Bulb # 30-84-057 which should work just great for you. view full answer...
Yes, you can use two of the Replacement Lock Cylinder and Premium Key for Thule One-Key Systems # 1500004217, and they will both have the same N217 lock cores, so they will use the same key. You can use Replacement Key # TH1500000217 as replacement keys for the N217 lock cores. view full answer...
We do have installation hardware for the Curt # 13445. What you need is the Replacement Hardware Kit for Trailer Hitches # RHK. Make sure you enter 13445 into the "Hitch Item Number" field before you add to cart. view full answer...
The Replacement Aero Bar Clip for Thule AirScreen Fairings # 8528583001 is a replacement for the TH8700, TH8701, TH8702, and the TH8703 Thule Fairings.
However since you mentioned you have the Thule Fairing for Roof Racks # TH871XT which is no longer available, this clip won't work for you, as there are no replacements available, but I do have another solution.
A new wind fairing, like the Thule Airscreen XT, will be your best bet, and will work great for you, and is compatible with the... view full answer...
Glad you're happy with the rack, and we can help you out here as we do have the correct replacement for your Inno T277 key; what you need is the following:
- Replacement Key for Inno Roof Racks, Bike Racks, and Cargo Boxes - Key T277 # IN38VR view full answer...
Ordering etrailer # RHK replacement hardware for any hitch we sell is easy. Follow the link for Replacement Hardware and enter the Item/Model number, and the Manufacturer Name then click Add To Cart. view full answer...
Swagman offers both a non-locking and a locking anti-rattle hitch pin for their # S64400 Original bike rack.
For the non-locking pin, use part # P5901 or part # S64027 for the locking version. view full answer...
We do offer the hardware needed to re-install the Curt Hitch, part # 13445 you referenced.
You just need to enter the part # RHK and then enter the hitch number # 13445 in the field on the right hand side of the page. Then select Curt from the drop-down menu and enter the quantity of hardware kits you wish to order. Click Add to Cart and you should be ready to go.
If you wish to discuss shipping cost or get other information about our products you can contact our good folks in Customer... view full answer...
To replace the mounting hardware for the etrailer Trailer Hitch Receiver # e22TR you need the Kit # RHK. Just input the hitch information prior to ordering and we'll send out the parts needed to get this installed on your 2015 Lexus RX 450h! view full answer...
For carrying a bike rack with a trailer hitch a draw bar/ball mount would not be needed. So for your 2002 Lexus EX 300 the Draw Tite hitch part # 36336 would be all that you need aside from the bike rack.
The most popular bike rack we carry that has been confirmed to fit this vehicle is the Thule Camber 2 part # TH9058. We asked our demo and install guys to name their favorite, most easy-to-use bike racks and this one showed up in nearly everyone's top three. Check out the review video... view full answer...
For the old Karrite Voyager cargo box you would use replacement latch # 03347. The replacement locks and keys, # SR03807, should also be the correct fit for the box.
For the hinges, replacement parts are not available. If they are not moving freely then you may need to remove the hinges, inspect them for damage or to see if they are bent, give them a good cleaning, dry them completely, then use a house hold lubricant to assist in movement.
Cargo box lids can kind of stick a bit even when... view full answer...
If there is any doubt at all, I would replace any worn parts. With a tow bar that has seen as much action as your Falcon II, # RM-520, it would be a good idea to give it some replacement parts so it will continue to serve you well.
In the realm of Falcon series tow bar replacement parts, we have the RoadMaster Autowlok Repair Kit for Falcon Tow Bars, # RM-910003-50. I have included a link to the installation details for reference. We also have the RoadMaster Replacement Button and Glue... view full answer...
The bolts for the Draw-Tite Max-Frame Trailer Hitch Receiver # 75685 are M12 x 1.25 x 25 mm Grade 8. The washers are 1/2 inch. If you want the replacement hardware kit, we can send you the actual parts # RHK or you can get what you need at the local hardware store. view full answer...
I have a solution for you, but the body of the Snug-Tite locks is not sold separately; additionally, there are a few different Thule racks that operate in the manner that you mention and they'll all use the same replacement anti-rattle lock. With that said, you can replace the entire assembly with the Thule Snug Tite Hitch Lock and Anti-Rattle Device # THSTL2, which is a confirmed fit for Thule bike racks that mount in 1-1/4" and 2" hitch receivers including the Expressway. view full answer...
The Draw-Tite Class III hitch you'd looked at, part # 75676 uses 6 M12 x 1.25 x 40mm (12 mm diameter with a 1.25 thread pitch x 40 mm long) class 10.9 bolts to secure the hitch to the nuts that are welded into the frame of your Lexus RX350.
We offer a replacement hardware kit as part # RHK. On the product page, you'd input '75676' as the hitch item number and choose 'Draw-Tite' from the drop down menu. This will provide all the hardware that originally came with the hitch.
I've linked... view full answer...
We have the best luck with the tensioners part # PW105 so that's what I would recommend with the tire cables part # PW1038 that you referenced. view full answer...
We can definitely help you out with replacement hardware for your Curt Trailer Hitch Receiver # C11362, Mike!
The part you're looking for is found as # RHK on our site. You just need to type in "C11362" into the hitch number Hitch Item Number box and we'll send you the correct hardware to get your hitch installed again.
Hitch hardware is only meant to be installed once so it's a good thing you're wanting/needing to get replacement hardware anyways. view full answer...
We sell a replacement installation kit for the trailer hitches we offer. For your RX 400h I found the Draw-Tite # 75153 Class lll hitch is a confirmed fit. I also found that the Curt # 13530 hitch is a fit.
To order the replacement hardware you can type # RHK in the search box on our website. Click on the link to get to the product page. Then type the hitch number in the box and select the manufacturer from the drop-down box. Click add to cart and the hardware will be assembled for you.
The... view full answer...
Yakima is slowly phasing out the Mighty Mounts, and moving to have all MightyMounts use the Universal adapter, part # Y03590 instead. This will connect to your Yakima HighRoller's existing mounting points and let you comfortably attach to your 2006 Lexus RX 400h's factory crossbars. view full answer...
Go To Results