Yes. You can rebuild the # LC178652 (follow leg) and # LC178653 (lead leg) with part # LC146059 for the lead leg and part # LC146060 for the follow leg. view full answer...
Yes, you have the correct step for your 2018 Keystone Cougar Fifth Wheel. If your door measurement from flange to flange (the narrowest measurements of the doorway) is 28-1/4" with your threshold at 40-1/8" from ground, then the SolidStep Manual Fold-Down Steps, # LC791574 is the correct part number. view full answer...
We don't have a database that tells us what the stud size is on that hub, but I was able to do a little bit of research and find some reports that say that your 1/2" thread by 2" long stud seems to be accurate. For that size wheel stud you can use the Redline # 7-122 lug studs you were looking at which are 2" long and have 1/2" threads. view full answer...
I went ahead and checked to see what we have for you, and the closest I was able to find to what you're needing is the:
-Kenda 18x8.50-8 Bias Golf Cart Tire with 8" White Wheel # AM90002.
This tire is 4.5" larger than the tire you currently have, however it is a tire/wheel combination that measures 18 x 8.50 x 8, and has a 4 on 4 bolt pattern like you're needing.
Additionally, due to the size of these tires it is not recommended at all to use on your trailer, as these tires only have... view full answer...
When it comes to replacing your leaf springs on your 2003 Outback 26rs I recommend The 4-Leaf Double-Eye Spring for 4,000-pound Trailer Axles - 26 inch Long SP-051275 will work for you.
This double-eye leaf spring acts as part of the trailer's suspension system by providing an attachment point for a 4,000 pound axle. The spring capacity is 2,000 pounds which puts the axle capacity at 4,000 pounds.
I attached a review video link below. view full answer...
I recommend using a Furrion Vision S system like the # FOS43TASF you were looking at and there's a good chance that your 2021 Keystone Passport came with pre-wiring for a Furrion camera system on the rear. If not, you will need to run the camera to a power source . The # FOS43TASF is a single camera system that comes with a 4.3" monitor.
You could upgrade to a 3 camera system with a largermonitor with the Furrion Vision S Wireless RV Observation Camera System w/ Side Marker Light Cameras... view full answer...
I'd be happy to help!
We do have a variety of hub options that fit the 3,500 lb axle on your 2019 Keystone Bullet Crossfire 1800RB but they all use the Bearing Kit # BK2-100 for a #84 spindle. This kit includes the inner and outer bearings as well as the grease seal, washer, and cotter pin for 1 hub.
If you're looking for a specific bearing number you need part # L68149 for the inner bearing and part # L44649 for the outer bearing.
Attached is an installation video of this bearing kit... view full answer...
You can replace the arms on your Dometic manual pull down awning with electrical arms, which is usually a much more convenient and cost effective option than replacing the entire awning itself. To replace the arms you can use either part # LC434723 for Black or part # LC434724 for White, which are 69" awning arms that will connect to your existing awning setup and are powered through your RV battery.
There is also a version of this upgrade that comes with it's own 18v battery, which are... view full answer...
I recommend using the Tow-Rax Battery Box # 329-HM426 for your upgraded 6V Trojan batteries. This box has internal dimensions of 11-25/32" long, 8-27/64" wide, and 10-15/16" tall which should be more than enough space to fit one battery. You will have to use two boxes if you are using two batteries. view full answer...
The Stromberg Carlson Electric Landing Gear Set - Weld On - 34-7/8" Lift - 5,500 lbs # LG-1 is a complete landing gear and motor set that's a popular replacement we've seen used on many Keystone Cougar 5th wheel trailers, but you'll still want to confirm a few measurements.
The two things you will want to measure will be the distance of the black outer tube of the jack and the distance between the frame clamps (this measurement can differ depending on where the weld stops are located).... view full answer...
You'll have to measure your current opening on your 2022 Keystone Fuzion Impact TT Toy Hauler but the LaSalle Bristol CrossBreeze Adjustable Toy Hauler Screen # 3441409200PBK is an excellent choice.
This screen will work with doorways that are 92" wide, includes side rails that will be installed onto your interior walls, and has a heavy-duty, tear- and puncture-resistant fiberglass wire mesh screen encased in a rugged plastic and metal housing.
If you can let me know what size opening... view full answer...
Thank you for the photo and the "SC = 68.50" means you have a spring-center to spring-center length of 68-1/2 inches and the "D35" means the axle is rated for 3,500 lbs. While we do not carry any axles with those specifications we do have a great solution, the Timbren Axle-Less Trailer Suspension System.
These are really an improvement over a traditional through-axle because they offer you an improved ride. They work independently (as opposed to an axle which is connected by a beam) so... view full answer...
I wouldn't know what the OEM window knob looks like or what you need just based off of the YMM of your 5th wheel. With that said, we do carry a couple of different options for you to check out.
For a tri-lug window knob with a 9/16" shaft, you can use the Tri-Lug Window Knob # 37220165,
For a tri-lug window knob with a 13/16' shaft, you can use the Tri-Lug Window Knob # 37220185,
Or,
For a standard window knob with a 1" shaft, you can use the Window Knob # 37220335,
For a standard... view full answer...
As it sits, your wife's Townie Go! 7D bike wouldn't work well with the Swagman # S94FR E-Spec bike rack, but with the addition of a frame adapter bar like # SA3040, which would span the distance between the seat post and the handlebar stem, the bike would fit to the rack perfectly.
I've linked to demonstration videos for the Swagman E-Spec and the frame adapter bar mentioned above. view full answer...
We don't have a database that tells us what the distance between the frame stanchions is on your 2020 Keystone Outback, but the most commonly used hitch for larger travel trailers and 5th wheels, and what I recommend is the Adjustable Width Trailer Hitch Receiver for RVs, 22" to 72" Wide # 13703. This hitch can fit on box frames, C-channels and I-beam frames that are between 22" and 72" apart and it can be bolted or welded into place, so it's one of the most flexible options available.... view full answer...
The Replacement Digital Remote Control for Fan # FV9068-81 will not work for your Fantastic Fan Model 6505-414, unfortunately.
There are no replacement remotes available as this unit, as it is no longer in production.
Instead, I recommend installing a Fan-Tastic Vent 7350 Series Upgrade Kit # FV807359, which will allow you to use your existing fan but still be able to utilize a remote.
Or
You can upgrade your entire unit, with Fan-Tastic Vent Roof Vent w/ 12V Fan and Remote # FV807350. view full answer...
Yes, the SoftStartRV Soft Start for 2 Air Conditioner Setup # SSR44FR that you're looking at is in fact the newer, smaller version.
These units will allow you to run your ACs on a small generator or simultaneously with small appliances, will reduce the startup power demand on your two air conditioner setup by up to 70%, and, will eliminate that loud clunking compressor noise.
These units will be installed vertically, and include the necessary hardware for installation as well. view full answer...
For your 5,200 lb axles on your 2021 Keystone Cougar, you can use the Electric Trailer Brake Assembly # AKEBRK-7L-SA for the left hand side and # AKEBRK-7R-SA for the right hand side.
The Nev-R-Adjust brakes are just self adjusting brakes just like the # AKEBRK-7L-SA & # AKEBRK-7R-SA mentioned above, so you'll have no issues swapping them out. view full answer...
I do have a solution for you, but unfortunately we do not have any kits available for locking up your 5th wheel setup.
Instead what you can use is the Tow Ready Base Rail Lock # TR63254, along with the 5th Wheel Coupler Lock # e98896, and the Master Lock Padlock # ML4140LH.
These don't have the ability to be keyed alike, but they will provide you with locks to the points that you mentioned. view full answer...
In order to re-pack the bearings on your trailer, all you will need is the grease, bearing packer, and grease gun:
- LubriMatic LMX Industrial Strength Grease - 14 oz. Cartridge # L11390
- Powerbuilt Deluxe Bearing Packer # ALL647646
- LubriMatic Standard-Duty, Lever Action Grease Gun # L30200
While you can certainly do it by hand, that isn't the most effective or efficient way. Otherwise, these will be the only things you need in order to pack the bearings on your trailer; I have added... view full answer...
Go To Results