We have some great replacement ladder options for a Keystone Cougar Half-Ton like the Stromberg Carlson Exterior RV Ladder part # LA-401BA which is 99-1/2" tall and has a 250 lb weight capacity. That said, this is a universal ladder so there may be some slight modifications needed in order to be made compatible.
Please note, we don't have any way to look up part numbers so if you're just looking for an exact bolt-on replacement you'd have to get in contact with the dealer. view full answer...
The MORryde cushioned equalizer kit part # MR87ZR will work great on your 2019 Keystone Cougar Half Ton 22RBSand then for a shackle kit you'd want the part # MR58ZR for a 2-1/4 inch long shackle or part # MR76ZR for 3-1/8 inch. You'd have to measure what you have now to know which you'd need as there isn't a way for me to look that up. view full answer...
Based on the dimensions you've provided you most likely have a 26" RV fireplace and will need a similar one like the Greystone 26" Electric Fireplace with Crystals # 324-000068. To be completely sure you'll need to remove your current fireplace and measure the cutout hole. Once we know these dimensions we can find the best replacement option for the space. view full answer...
We do have the exact bearings, races, and grease seal you need for your 4,400 lb Dexter axle, and while there isn't a single kit with the parts, you can get them all individually. What you will need are the following:
- Bearings # L68149 and # LM67048
- Grease Seals # RG06-050 view full answer...
We have black water tank waste valves with longer rods/cables like with the LaSalle Bristol part # 34466N4AB72GMA which comes with a 72 inch long cable. The fittings on this are hub and hub which mean they are designed to fit over pipes.
I attached a link to a page that has all of the waste valves we offer with varying length cables. view full answer...
To tow your 2019 Keystone Cougar 34TSB with 1250lbs tongue weight with your 2016 Ford F-150 with the Max Tow Package I recommend the Equal-i-zer Weight Distribution System w/ 4-Point Sway Control - 14,000 lbs GTW, 1,400 lbs TW # EQ37140ET.
This system works with tongue weights between 1000-1400lbs so it will be perfect for your tongue weight, and the built in 4-point sway control does an awesome job of keeping the trailer straight while going down the road.
I included a video of the #... view full answer...
There's no reason you'd have to remove your old stabilizers when installing the Electric Ground Control TT Automatic 5-Point Travel Trailer Leveling System # LC672136 unless they were in the way of where these need to install, but in reality with this kit installed you aren't going to need additional stabilization as this will do a really great job keeping it as stable as possible.
I attached an install video for this kit on a similar Keystone travel trailer as yours as well. view full answer...
The Thomas Payne 195-000062 (DISCONTINUED) Euro-Recliner features diamond stiching in the back and set area. I saw the side by side picture you were referring to. That picture was supplied by a customer.
The current style is the diamond stiching. I checked and we don't have any of the previous style still on hand. view full answer...
Yes the SoftStartRV like the part # SSR44FR which is a pair of them is universal and would work great on Coleman Mach Q units as like you noticed these are universal. view full answer...
Thankfully basically all trailers use the same dimensions for the mounting brackets of their jacks which means any power jack like the Bulldog part # BD500199 that you referenced would fit and work great. My favorite is the Phoenix electric trailer jack part # UF38-944040 which is by far the fastest jack out there. view full answer...
Yes, you'll want to replace the grease seals when packing the bearings but the grease cap can be reused if it's still in good condition. If you don't know what bearings and seals you need, I have a few options for you to help with identifying these. The first and easiest method would be to crawl under the trailer and look for the axle tag on the beam. This should give an axle capacity which we can then use to find the bearings based off industry standards. For example, a 3,500 lb axle uses... view full answer...
The Blue Ox # BXW1000 SwayPro is designed for trailers with tongue weights ranging from 750-1000 lbs. If the fully loaded and ready to pull trailer tongue weight of your travel trailer is less than 750 lbs, you'll have a pretty rough ride and the system won't be as effective as it should be. I'll link to an article that shows how to determine the actual as-towed tongue weight of your camper.
If the as-towed trailer tongue weight IS 640 lbs (as opposed to the dry tongue weight) then you'll... view full answer...
Electric A-frame trailer jacks often have the same bolt pattern, yes. Just keep in mind that a higher-capacity jack doesn't necessarily mean more speed, it's all about the jack itself. For example, the 3,500 lb Ultra-Fab Electric A-Frame Jack # UF38-944017 extends 6" in 25.3 seconds (with 1,000 lbs of tongue weight), while the 4,000 lb Bulldog Trailer Jack # BD500200 extends 6" in 28.5 seconds (with 1,000 lbs of tongue weight).
That said, since you mentioned wanting a heavier-duty jack,... view full answer...
The cover I recommend for a Keystone Cougar Half-Ton 30RKD is the Adco Olefin HD All-Climate + Wind RV Cover for Travel Trailer part # AD59ZR. This cover will be a great fit, covering body's up to 34' long (overall length - tongue length = body length). It is constructed of an olefin top panel which has great uv resistance properties, is very durable, and dries quickly. The cover also has a cinching system for a tight fit and weighted buckles for easy install. view full answer...
The actual tray dimensions of the MORryde RV Cargo Sliding Tray # MR44FR that you referenced are 58-1/4" long x 16-7/8" wide whereas the overall dimensions 60" long x 20" wide. The hardware used with this will be at your discretion although it is advised to use as much of it as you can but obviously you'd have to work around the water tank you mentioned. view full answer...
You'll have to use a Furrion monitor as there isn't any other brand or type of monitor that is compatible. For that you have three size options:
- 4.3" Monitor: Replacement 4.3" Monitor for Furrion Vision S Wireless RV Camera System # FR77FR
- 5" Monitor: Replacement 5" Monitor for Furrion Vision S Wireless RV Camera System # FR97FR
- 7" Monitor: Replacement 7" Monitor for Furrion Vision S Wireless RV Camera System # FR47FR
The mount and power supply for each of those monitors is listed... view full answer...
For just the diverter for your fill valve setup we do have the part # P23401LF which would work great but we don't have the rest of the plumbing in the setup you pictured. view full answer...
Swagman hitch pins like what comes with the Anti-Rattle Hitch Lock and Cable for Swagman Bike Racks # S64030 that you referenced are 11UNC. view full answer...
For an air distribution box for the Advent Air part # ACM150 that has a build in thermostat and controls you'd want the part # ACDB. While we don't have an install video for this unit on your exact RV I attached an install video for this setup on a similar RV that covers the process. view full answer...