Yes, you can use the Superwinch LT2000 ATV winch # 1120210 on your 2016 Kawasaki Teryx4 800. All you will need is the proper mount kit. I recommend mount kit # BDW15176 because it is a custom fit and will also work with the LT2000 winch. view full answer...
You can use the Tandem-Axle Trailer Hanger Kit # APT5 for your trailer with the 2-3/8 inch axle. A 2-3/8 inch diameter axle is typically found on 3,500 pound axles which is within the range of this kit (2,000 to 7,000 pound axles). The measurements in the chart on the page can be used as a guide.
A better option for a 2-3/8 inch axle is kit # APT3, # AP233-H248, or # APT1. It all depends on the axle spacing, spring measurements, and equalizer length. view full answer...
For your 2014 Kawasaki Teryx4 800LE the Bulldog Winch Custom-Fit Steel ATV Winch Mount # BDW15176 is a custom fit. It uses the basic mounting locations, so it should work with your winch. For instance the Bulldog Winch will have a 4 bolt mounting pattern that is 6-5/8 x 3 inches center to center. view full answer...
We currently have one winch mounting brackets that is designed for your 2018 Kawasaki Mule 410 which is the Bulldog Winch Custom-Fit Steel ATV Winch Mount part # BDW15106. This bracket has pre-drilled mounting holes to accept a Bulldog winch. Although we do not have a winch mounting bracket specially for your Warn winch, you would more than likely be able to use this plate so long as you are willing to drill new holes. view full answer...
The Bulldog Winch Custom-Fit Steel ATV Winch Mount part # BDW15122 is designed with multiple different spacings to allow you to mount many different winches. Most commonly we find that the smaller winches like yours utilize a 6 5/8" x 3" bolt pattern on the winch which matches this mounting plate.
On your plate it appears there isn't a lot of wiggle room forward and back to make up that 5/8" difference. With that said if these don't line up exactly you can simply drill out holes in... view full answer...
I have the perfect option that will allow you to pull your Kawasaki 3010 Mule Trans 4x4 Diesel up a 40 degree incline. As you have identified the ATV weighing up to 1,400 lbs. you will want a winch with a line pull strength of 3,500 lbs. at minimum to account for the incline.
For this, I recommend using the Bulldog Winch Custom-Fit Steel Winch Mount part # BDW15121 in addition to the Bulldog Winch Utility Winch part # BDW10004. This winch has a 1.87 hp motor with a 85' long steel cable... view full answer...
I reached out to my contact at Bulldog Winch, and the Bulldog Winch Custom-Fit Steel Winch Mount # BDW15176 will fit on your 2016 Kawasaki Teryx 2 door. view full answer...
I checked with Classic Accessories and the Classic Accessories All-Weather UTV Cab Enclosure part # CA18020 is listed as a fit for a Kawasaki Teryx 750 till 2015. Therefore, yes, it will fit a 2007. view full answer...
There is not a custom winch mount for your model ATV, however if you have a 2 inch trailer hitch receiver like # C45006, you could use a Winch Receiver Mount like # BDW20155.
With a mount combination like this, you could absolutely use an electric winch. My recommendation is the Bulldog Winch Powersports Series ATV Winch # BDW15014 which will work very well for your application and give you easy to use controls at your handlebars. I've attached a video to assist and you can see the prices... view full answer...
The Classic Accessories All-Weather UTV Cab Enclosure # CA18020 will only fit your 2008 Kawasaki Teryx 750 if you remove the roof. There isn't a similar option that will work with your Kawasaki that will allow you to retain the roof. view full answer...
Yes, the Superwinch LT3000ATV Winch, # SW1130220, will fit the Bulldog Winch Custom-Fit Steel Winch Mount for Kawasaki Mule, # BDW15184.
Both the Bulldog mounting brackets and Superwinch LT3000 winch will mount to your 2015 Kawasaki Mule Pro-FXT. view full answer...
I spoke with my contact at Classic Accessories and she stated that the All-Weather UTV Cab Enclosure, # CA18020, will fit all current models of the Kawasaki Teryx, including your 2008. I have included a link to the installation details for you. view full answer...