Thanks for the photo and that model of Happijac is nearing a quarter-century old as of this writing and there are no longer replacement parts available for it. The best option we can offer are new camper jacks, the Brophy Cable Camper Jacks and you will select the right one based on the weight capacity and maximum lift height you need.
- 1,000 lbs: Brophy Cable Camper Jacks - 57" Max Lift Height # CJ31
- 1,500 lbs: Brophy Cable Camper Jack - 67" Max Lift Height # CJ74H
- 3,000 lbs: Brophy... view full answer...
There are camper jacks that will allow you to take your camper off your truck bed easily, but there is nothing with wheels as that would not be stable enough so they do need to remain stationary. To choose the right camper jacks, you need to know the weight capacity you need, and can choose from either manual or electric jacks.
The best jacks are the HappiJac because they permanently install, have the highest weight capacities, and you even have the option of electric jacks for the easiest... view full answer...
Thanks for the photos and like you said, they are the Atwood jacks 86065, which are discontinued jacks. What that means is the best option we can offer are new, manual camper jacks, the Brophy Cable Camper Jacks.
Based on my research, your 2014 Lance 1050S camper weighs in the neighborhood of 3,000 lbs so you will select the right one based on the maximum lift height you need.
- 4,000 lbs: Brophy Heavy Duty Cable Camper Jacks - 57" Max Lift Height # CXHD
- 4,000 lbs: Brophy Heavy Duty... view full answer...
The HappiJac Swing-Out Extender Bracket for Dual Wheel Chassis Truck Camper Jacks # HJ54FR (single) or Swing Out Extension Brackets for HappiJac Truck Camper Jack Systems # LC182496 (double) are not compatible with the Atwood electric camper jacks.
There isn't a similar extension for Atwood jacks, as they have been discontinued; the Swing-Out Extender # HJ54FR is only compatible with electric camper jacks from Happijac, the 8,800 lb HappiJac Electric Truck Camper Jack System - 34-1/2"... view full answer...
I went ahead and reached out to HappiJac, and they were able to determine that based off of the age of your jacks, the Replacement Bevel Gears for HappiJac Truck Camper Jack Systems # LC182851 will not work for you.
Instead, they are recommending that you upgrade your jacks with the:
-HappiJac Manual Truck Camper Jack System # LC736514-4.
These jacks have an overall weight capacity of 8,800lbs, is made in the USA, and also includes the mounting brackets, which is designed to fit most... view full answer...
The Manual-to-Electric Conversion Kit for HappiJac Truck Camper Jack System # LC733960-182524 is a fit for HappiJack manual jack system 4220 or 4820.
The HappiJac Electric Truck Camper Jack System - 34-1/2" Lift - 8,800 lbs # LC736514-ELKIT or the HappiJac Electric Truck Camper Jack System - 36-1/2" Lift - 11,200 lbs # LC736515-ELKIT are the complete kits if you don't have compatible jacks. view full answer...
I do have options available for you however, we only offer universal jacks sold in pairs not single replacement jacks for your Lance 815 truck bed camper.
If the universal jacks are something you would like to consider, I recommend using the Brophy Cable Camper Jacks part # CJ74. The Brophy jack have a maximum weight capacity of 3,000 lbs. and can lift the camper from 17"-67". They stand 76" tall and are a non-permanent removable option. view full answer...
The only truck bed camper jacks we offer are the Brophy Cable Camper Jacks. As long as the loaded weight of your truck bed camper does not exceed 3,000 lbs then I recommend part # CJ41 for 57" of lift or part # CJ74 for 67" of lift. These jacks will do an excellent job of helping to load and unload your camper into the truck bed. They do not permanently install on the camper which makes for a very clean look and they can also be broken down into three pieces for easy storage. view full answer...
With dually trucks I recommend the Swing Out Extension Brackets # LC182496 with the HappiJac Manual Truck Camper Jack System # LC736515-4. This is due to the Brophy Heavy Duty Cable Camper Jacks # CX74 having to sit under the lip of the camper. Since slide in campers can vary in width depending on manufacturer and model I cannot say that they will clear the dually fenders on your 2022 Ford F-350. The extension brackets will give you 3-1/2" to 4-1/2" of extension off the side of the camper... view full answer...
Camper jacks like the Brophy part # CJ74H can be used on dually trucks but it comes down to the width of the camper relative to the width of the dually fenders of the truck. If the camper is the same width as the top of your bed rails there won't be a way to use a camper jack like this as they'd interfere, but if the width of the camper is same as dually fenders it would work well. view full answer...
The Replacement Circuit Board w/ Wireless Remote for HappiJac Electric Truck Camper Jack Systems # LC733540 is only compatible with HappiJac electric camper jack systems like the HappiJac Electric Truck Camper Jack System # LC736514-ELKIT, and is not going to be compatible with your Reico jacks.
I know it's not what you wanted to hear, however since it sounds like you're having continual issues with your Reico Jacks, it might be a good idea for you to upgrade/replace your current jacks.
We... view full answer...
I contacted Brophy and the Brophy Heavy Duty Cable Camper Jacks part # CX74 are designed to be used on a solid flat surface preferably concrete. Your concerns are valid that the camper may slide off if the ground is unstable. They do not recommend using blocks or supports under the feet that will raise the jacks up because that could cause instabilities as well. You are best to use the jacks on solid ground. view full answer...
The Replacement Jack for HappiJac Truck Camper Jack Systems # LC736515 is a replacement leg for the HappiJac Electric Truck Camper Jack System # LC736515-ELKIT that replaced the 4800 series jacks. These jacks lift 2" taller at 36-1/2" and are stronger with a capacity of 2,800lbs per jack versus the 4100 at 2,200lbs. The Replacement Jack # LC736514 is the one that is a replacement for the 4100 series is why I recommended that jack.
If you want to move to the stronger and taller lifting... view full answer...
The Swing Out Extension brackets part # LC182496 are designed for HappiJac camper jacks and the 2002 Lance 920 does not have the Happijack system unless you have replaced the jacks at one point. If you have replaced the system with the HappiJacks then you can use the Swing Out Extension Brackets for HappiJac Truck Camper Jacks part # LC182496 which will bolt up to the existing bracket on your camper for the jacks. Lance campers didn't have HappiJack setups until 2019. If you have any other... view full answer...
You can use the Jack-in-a-Box Camper Slide-Out Support Set part # JB-30 to stabilize the truck bed camper along with the original jacks. The adjust from 31"-45" tall and have a weight capacity of 10,000 lbs per jack. view full answer...
The Brophy Cable Camper Jacks part # CJ74 can be used for storage but if the side of the camper do not extend to or past the sides of the truck bed it would not be feasible for them to be used for loading/unloading. That said, you could somehow fabricate some extensions on the camper and or jacks but that's the only option I see. view full answer...
The Swing Out Extension Brackets part # LC182496 which are for HappiJac Truck Camper Jacks will add approximately 3-1/2" - 4-1/2" of clearance to the existing jacks per side. This can then be used to determine compatibility. I would unfortunately not have any other brackets that offer more of an extension if that were needed. view full answer...
Lippert, the manufacturer of HappiJac camper jacks tells me that the HappiJac # LC733960-182524 conversion kit is only compatible with the HappiJac # LC736514-4 and # LC736515-4. Your best bet for a motorized camper jack kit we offer would be the HappiJack # LC736514-ELKIT for an 8800 lb system or # LC736515-ELKIT for a 11200 lb capacity. view full answer...
The Atwood jacks on your 2000 lance in bed camper are not compatible with the Happijack conversion kit Item # LC733960-182524. If you are looking to add an electric jack set up to you camper, I recommend Item # LC736515-ELKIT for the 11'200lb kit and Item # LC736514-ELKIT for the 8'800lb kit as we do not offer conversion kits for Atwood jacks. view full answer...
The Brophy Cable Camper Jacks - 57" Max Lift Height - 3,000 lbs - Qty 2 # CJ41 would require two sets of jacks to lift your 4,500 lb truck bed camper and that application will absolutely work. The issue is the dually rear axle will cause that fender to stick out and that is problematic for these jacks. I reached out to the manufacturer and they can't confirm the fit of your Arctic Fox 1150 and Ram dually truck with this system. The poles are very close to the bed rails and the compatibility... view full answer...