Hey Bob, the Dexter electric over hydraulic brake actuator part # K71-651 can be used with the integrated brake controller of a 2012 GMC Sierra but you would need to use the adapter part # DX35FR. view full answer...
Hey Sherri!
According to my research you'll just need to keep your receipt, delivery slip, or another record of your payment to turn in for any warranty issues with a Greystone Standard RV Microwave, like part # 324-000105. The instructions don't have anything listed about reaching out to Greystone right after the purchase to establish the warranty. view full answer...
Hey Sean!
As long as you don't have anything placing a draw on the Bright Way Solar Battery Charger # BRW54FR, and the 4-6 hours of sunlight is unrestricted then this kit will be just fine for keeping your Group 24 battery topped off. view full answer...
So first of you are going to need the Curt Trailer Hitch Receiver # C23WR which I see you already found. And I do understand your confusion with wiring since you would think since it did not come with the receiver you would not have the factory tow package. Both the Tekonsha 7-Way # TK44ZR(without tow package) and Curt 7-Way # C68JR(with tow package) are going to have the exact same connector that connects them to the vehicle. So that leads me to believe the only real difference for the... view full answer...
The Pioneer SXB 42100B you have there has been discontinued. I reached out to Rhino-Rack and I'm sorry to say there are no parts available that would allow you to mount that on your 2020 Toyota 4Runner. If you still want to install a platform it will have to be a completely different rack. We have the following available from Rhino-Rack:
-Rhino-Rack Pioneer Platform Rack - Raised Side Rails - 60" Long x 49" Wide # RR77AB
-Rhino-Rack Pioneer Platform Rack with Backbone Mounting System... view full answer...
The AirBedz Rear Seat Air Mattress # 341033 does have separate fill valves for the bed and base sections. So you will be able to inflate the base and leave the bed deflated until you need it. view full answer...
The Firestone Ride Rite systems like the part # F22ZR do not come with compressors to control the air pressure from within the cab of the truck. That is something you would need to get separately like with the Firestone # F2219.
With just the air bag kit you can control the pressure in the bags with the air valve that would get mounted on the vehicle bumper typically. view full answer...
Hey Kelly, there's actually an easier way to tow the Malone LowBed MicroSport Trailer part # MPG464-LB with the current hitch you have installed as this does not require the trailer hitch to be a 2 inch trailer hitch and instead just requires a 2 inch hitch ball. You would just need a ball mount for your current hitch like the part # 3594 and a 2 inch hitch ball like the # 19258. view full answer...
Hey Kenneth, yes the Solera Slide Out Awning part # LCV000251461 that you referenced does come with all brackets needed to install. It even comes with the awning rail that installs above the slide out that the awning slips into. view full answer...
Hey Frank, the Ram OEM puck kit did not change between a 2016 Ram 3500 and a 2023 Ram 3500 so your Demco setup that used the head and base assembly part # DM6077 and the rail kit adapter part # DM6099 would transfer to your new truck. view full answer...
Hey David, so the 4.3 inch Furrion Vision S monitor is not compatible with the Furrion Vision S side camera kit part # FCE48TASL. The monitor is small enough they figured it wouldn't be able to display all three views so they made it only work with the 5 inch and 7 inch monitors.
To upgrade to the larger monitor so you can use the side cameras you would want the part # FR97FR for a 5 inch monitor or part # FR47FR for a 7 inch. view full answer...
Hey Gerald, so we have the Kodiak disc brake kit part # KOD67FR which comes with the 10 inch hub/rotors, calipers, and brake mounting flanges as well as the bearings and seal but we don't have this kit with the brake lines. So you would need to get the brake line kit separately like the part # 18SI-BLKIT for a single axle setup or the part # 20TA-BLKIT for a tandem axle setup. view full answer...
Hey Mark, the part # K71-653-00 is just the cushioned equalizers whereas the part K71-653-06 is a kit that includes the cushioned equalizers as well as heavy duty shackles and bushings. view full answer...
Both the old Falcon 5250 tow bar and the current Falcon 2 # RM-520 will work with the same crossbar assembly part # RM-067. So if you already have the Roadmaster crossbar you should not need any additional parts to bring it together with the Falcon 5250 tow bar. You would just secure each arm using the Base Pins # RM-910029. view full answer...
You are going to want a ball mount with a 2" drop for your utility trailer. We have a kits for a 1-7/8" # C45034 or 2" # C45534 hitch ball. We also have the Wrench # C20001 for tightening the hitch ball. view full answer...
Hey Kevin, it looks like the pre-wired bracket on your camper is the "shark fin" style bracket. This bracket is made specifically for the Furrion Vision S Wireless RV Backup Camera # FCN48TASF. The camera in your other picture is their rear red light camera. You could certainly still use the rear red light camera on your camper, it just would not use the pre-wired bracket.
If you want to use the pre-wired bracket, I do suggest returning the camera you purchased and instead getting the... view full answer...
For the correct shank you will want to determine how much drop you are going to need on the Reese Dual Cam II Weight Distribution System # RP45FR. Here is a list of different shank drops we offer for you to select from.
1/4" to 4" of Drop # EQ90-02-4200
2-1/4" to 6" of Drop # EQ90-02-4300
5-1/4" to 9" of Drop # EQ90-02-4400
8-1/4" to 12" of Drop # EQ44FR view full answer...
Hey Jeremey, this is a great question but the Kodiak disc brake kits like the part # KOD87FR are designed to keep the wheel placement the exact same so that you wouldn't have to worry about frame or fender clearance issues. This would not rub on your torsion axle at all. view full answer...
Hello Tim. We can definitely set you up with a complete AC system with an Advent low profile unit. We currently do not offer these parts as a package, but you can purchase all of the exact same components separately. To answer your question, yes, the same air handler will work with the low-profile unit. Here is what you will need for the complete AC system:
- Advent Air Low Profile RV Air Conditioner - 13,500 Btu - White # ADV79FR
- Air Distribution Box w/ Built-In Thermostat for Advent... view full answer...
Jason, to be able to use the Redarc Tow-Pro # RED44FR on your your 2021 Subaru Crosstrek Hyrbid you're going to need to first add the Curt Powered Tail Light Converter w/ 4-Way Flat Trailer Connector and Install Kit # C59496 which will give you the wiring needed to add a 7-way with # ETBC7. view full answer...