Yes. In order to use the SmartPlug Replacement RV Power Inlet - 50 Amp # SM56FR you will need to replace your old twist lock power cord with a SmartPlug RV Power Cord - 125/250V - 50 Amp - 30' # SM86FR. view full answer...
The VueSMART RV and Trailer Backup Camera # HM34FR will not connect to your aftermarket radio, but will connect to your Android or IOS device via WIFI.
The Hopkins Towing Solutions mobile app is required and will let you use any smart device as a monitor.
The camera has 6 LEDs that surround the camera lens to provide night-time vision. The universal mounting bracket installs behind the trailer's brake light. You will have to use the existing attachment points from your trailer light... view full answer...
There is an adapter you can use to go to 30 amp and 15 amp from the SmartPlug RV Power Inlet - 50 Amp # SM29FR.
What you would need is the SmartPlug Marine Power Cord Adapter - 50 Amp Female to 30 Amp Male Twist Lock Connector # SM43VR.
Or the SmartPlug RV Power Cord Adapter - 50 Amp Female to 15 Amp Male # SM93VR. view full answer...
Great question.
The Solera Smart Arm 12V Power RV Awning - 18' Wide - Programmable - Black Fade # LC517505 comes with all the hardware needed to install it, however you will need one more item.
You will need the Solera Awning Rail Extrusion - Black - 8' Long # LC715217. This connects the fabric to the RV.
I do, HIGHLY, recommend the Solera Smart Arm Wind Sensor Kit # LC715123. This will give you some security for when you leave the awning down and those random gusts of wind or sudden... view full answer...
We do not carry any awning arms that are smart and non-programmable.
Instead, what we do carry is the Solera Smart Arm 12V Power RV Awning Conversion Kit # LC759516.
This kit will upgrade your existing awning, to a powered one that extends and retracts by the push of a button. This kit also measures 63" long, is black in color, and has a programmable touchpad. view full answer...
You sure can!
Similar to the Jensen LED RV Smart TV # ASA98VR you're interested in, we have the:
-Jensen LED 110V RV TV # JE5515.
This TV has all the same features as # ASA98VR however it does have the much larger 55" screen you're interested in.
As far as the capability to be mounted outside your RV, you can absolutely do that. All you'd need to do is make sure it is connected to a good 110V power source, just like you would if it were inside your RV. view full answer...
Yes! To get another 30A socket to match what comes with the SmartPlug RV Power Cord and Stainless Steel Inlet # SM39FR you just need the part # SM24FR.
Attached is an installation video for you to check out! view full answer...
For your Dometic 9000 awning, I recommend you take a look at the:
-Solera Smart Arm 12V Power RV Awning Conversion Kit # LC434724 for white,
Or
-Solera Smart Arm 12V Power RV Awning Conversion Kit # LC434723 for black.
Either of these kits will work beautifully as an upgrade for your current Dometic system, includes a 110-Volt charging kit, and offers a quick and easy installation.
The Solera Manual Pull Style to Power Awning Conversion Kit, White # LC329250 that you inquired about... view full answer...
We can help you get your 2008 Smart fortwo Passion ready with the parts needed for flat-towing behind your RV. Do be sure to check your owner's manual to confirm that your particular car can be safely flat towed, since some may require special preparation steps or have specific limitations.
The linked article details the components needed to flat tow a vehicle behind an RV. I also included articles specifically concerning braking systems and hitch adapters, both of which are required,... view full answer...
While we won't be able to tell you if there are nearby distributors, what I can tell you is, that we do carry the TowSmart SmartStep Non-Slip Pad - Rubber w/ Adhesive Backing # 348780, and we would be happy to ship it right to your address.
This non-slip pad measures 17-1/2" long and 4" wide, however this can be trimmed to match what you need.
Attached is an installation video for you to check out as well. view full answer...
I have a solution for you, but the Blue Ox # BLU79FR is not compatible with your 2016 Smart fortwo Passion. Instead, the tow bar wiring I recommend that installs similarly is the Tow Ready Tail Light Isolating Diode System with 4-Pole Connector # TR118821, which will work well if your RV has a 4 way connector and the diodes in the kit work to eliminate any feedback between the two systems.
I've also linked a review video of this harness for you to check out as well. A complete flat towing... view full answer...
You can absolutely add sensors for a tire pressure monitoring system (TPMS) to monitor 8 tires on your RV. There are two options for a TPMS I recommend:
- TireMinder Smart TPMS for RVs - Signal Booster - 6 Tire Sensors # TPMS-APP-6 with Brass Tire Sensors for TireMinder TPMS - Qty 2 # TM-2Brass
- TST TPMS for RVs - Color Display - Signal Booster - 6 Flow Through Tire Sensors # TST-507-FT-6-C with Flow Through Tire Sensors for TST TPMS - Qty 2 # TST-507-FT-S2
Each of these are great systems,... view full answer...
Yes, The Electric Ground Control TT Automatic 5-Point Travel Trailer Leveling System - 10,000 pounds # LC672136 will work for you.
This system will automatically level and stabilize your Jayco Eagle Travel trailer. It has 5 precise, motorized jacks that can be operated by the included control panel or via your smart device only if your RV has WI-FI and a factory-installed OneControl system.
The system has a sturdy steel construction and has a corrosion-resistant black powder coat finish.... view full answer...
According to Progressive Dynamics, the:
-Progressive Dynamics RV Power Control Center with AC/DC Panel and Converter/Smart Charger # PD4135K requires the use of 8 AWG wire. view full answer...
The Progressive Dynamics RV Power Control Center with AC/DC Panel and Converter/Smart Charger - 35 Amp item # PD4135K is the replacement for the Magnetek 6300 Q series RV converter. It comes with the front cover. The AC breakers and DC fuse connections are sold separately and we do not carry them. view full answer...
For flooded lead acid batteries we do have the converter you need, which is the Progressive Dynamics 9300 Series RV Converter Charger # PD69RR.
This converter is for flooded lead acid, AGM, and lithium batteries. view full answer...
You can fit the Optronics LED Trailer Clearance or Side Marker Light # MCL32RBB to the VueSMART RV and Trailer Backup Camera # HM34FR. The Optronics light has a black base to match the base of the VueSMART camera.
Since you are wanting to use the light as a 3rd brake light rather than a running light you will need a 3rd Brake Light Logic Module # PP20-702 to separate the brake light signal from the turn signals on your Scamp 16 trailer. This will require you to run wiring from both tail... view full answer...
I recommend looking at the Go Power RV Converter and Smart Battery Charger # 34266912 which has a maximum output of 14.4v and is designed to work with AGM batteries. This is the most powerful converter and smart battery charger we have and it is rated much higher than the 13.6v max on the Progressive Dynamics 9100 series converters like the # PD9130.
Per the instructions (included) you will need to remove your existing converter, as it is not designed to work on conjunction with that system. view full answer...
You can upgrade your setup from a 30 amp to a 50 amp but it's going to be pricey and you're likely going to need to hire an electrician.
The first thing you're going to need is to swap out your 30 amp inlet with the SmartPlug RV and Marine Power Inlet # SM79FR. This is going to require you to replace the existing wiring as well to accommodate for the extra amps.
You'll also need a new control center, Progressive Dynamics 4500 Series RV Converter w/ Charge Wizard and AC/DC Distribution... view full answer...
To use the Roadmaster Tracker tow bar # RM-020 with your 2015 Smart fortwo you will need base plates # 52285-1. If you want to be able to remove the crossbar from the tow bar then you would also need to use quick disconnects # RM-201.
In addition to the tow bar and base plates there are a few other items needed to properly and safely flat tow the vehicle. First you will need some safety cables, # RM-643. The coiled design helps keep the cables off of the ground.
Next you will need a lighting... view full answer...