The great thing about brake controllers is that they are not vehicle specific so you can install one on just about anything, including your 2007 Isuzu NPR.
I do not know if your truck has a trailer connector of any kind or not so I will start from the beginning; installing a 4-Way connector. Since there are no custom fit harnesses listed for the truck you will want to use a universal hardwire kit # 119178KIT. I have linked the instructions for you.
Once you have that installed you can... view full answer...
To add a trailer brake controller and 7-Way connector to your 1999 Isuzu NPR you will first need to install a 4-Way trailer connector # 119178KIT. Then you will need to install 4 and 7-Way installation kit # ETBC7.
The ETBC7 kit includes the 7-Way and the wiring and accessories needed to install a brake controller. I have included some links to the right that explain the ETBC7 installation.
For a brake controller I recommend the Tekonsha P2, # 90885. This is our most popular brake controller... view full answer...
Since your 2000 Isuzu Trooper already has a 4-Way trailer connector (if it is different than a 4-Way let me know) so all you will need are 2 additional parts. First, you will need to add a 7-Way using # ETBC7. This kit also includes the wiring to wire in the brake controller.
The second part you will need is the brake controller itself. Brake controllers are not vehicle specific so you can use any one you choose. I recommend the Tekonsha P2, # 90885, because it is easy to set up and easy... view full answer...
The Curt Trailer Hitch Receiver # C13098 is custom fit for your 2001 Izuzu Trooper. It will not require any drilling to install the receiver onto your frame. You will want to use a Nylon Tube Brush # 814092 to clean out the treads on your threaded inserts in your frame.
The Curt T-Connector Vehicle Wiring Harness # C55339 will provide you a 4-way flat connector to control the lights on small trailers. If you are pulling a larger trailer with a 7-way connector you will need the Universal... view full answer...
I would recommend a Class III hitch over a Class II hitch in any situation where a Class III hitch is available. Even though you only need to tow a small trailer today your needs may change in the future and the class II hitch may not be able to do what you need. Another upside to the Class III hitch is that there are many more accessories designed to fit the Class III hitch. For just a few dollars more you will have more towing capacity, safety and convenience.
The Draw-Tite Class III... view full answer...
You will need the following items to install cross bars on the naked roof of your 2002 Isuzu Axiom:
Crossbars # INXB130-2
Feet # INXS250
Fit Kit # INK117
Once you have the cross bars correctly installed you will be able to use the Malone Channel Loader Kayak Load Assist, item # MAL48FR, along with another set of cross bars. You can then use any of the Yakima Kayak carriers including the Kayak Carrier, item # Y04082 to secure your kayaks on the roof of your vehicle. view full answer...
I have a solution for you. Unfortunately, we do not sell the bow system frame or hardware for the 1990 Isuzu Amigo top cover. However, we do carry a replacement top: the Pavement Ends Replay Soft Top Fabric for Isuzu Amigo # PE5113901. Even though the back window allows you to unzip it completely, the Pavement Ends top is not a convertible top. view full answer...
The Curt # C13222 is not a fit for the 2001 Isuzu Rodeo Sport. We currently do not have a hitch that fits your vehicle.
If you want to carry bikes or cargo, you could add the SeaSucker Monkey Bars Roof Rack - Round Bars - Vacuum Cup Mount - 48" Long # 298-SX6000B which is a confirmed fit for your Rodeo Sport.
If you let me know your intentions, I can help you choose products to get it done. view full answer...
Go To Results