The square links on the pewag All Square Mud Service Snow Tire Chains - 1 Pair # PWE2441S are 8.2mm thick (.31 inches), so they will sit about 1 inch tall when mounted on the tires. There isn't a precise measurement on this since it depends on the tires, but you can generally expect about that much added height. view full answer...
I will try to provide the dimensions you need. If another dimension is needed let me know and I will be glad to get it for you.
Overall length = 33 inches
Length to the spring bar detent = 29 inches
Width and height of spring bar = 1-3/8 inches
Width of Trunnion at Spring Bar = 3 inches
Height of Trunnion at Spring Bar = 2-3/4 inches
Trunnion ends = 1 inch diameter
Overall Trunnion Height = 4-1/2 inches view full answer...
I spoke with my contact at Yakima and he stated that on the MegaWarrior, # Y07080-82, most of the basket is made up of 1 inch diameter tubing. The larger pieces are 1-1/8 inches in diameter. I have included a link to the installation details for the basket for you. view full answer...
I had our warehouse measure the #84 E-Z Lube Spindle w/ Brake Flange for 3,500-lb Trailer Axle - 1-3/4" Diameter # TRU74FR you were looking at and from the front of the brake mounting flange to the tip of the spindle measures 5-3/8", and from the back of the brake mounting flange to the end of the spindle measures 3-3/8".
I included a diagram showing these measurements and a video of the # TRU74FR for you to take a look at. view full answer...
The standard air tubing diameter for Air Lift and Firestone air bag kits is 1/4 inch like the part # F2012 that you referenced. Firestone and Air Lift do not make a smaller diameter tubing at this time. view full answer...
The Replacement Step Pad for Aries 3" Wide Oval Nerf Bars # AA86FR measures 6.496” apart center-to-center for the inner pins, and the two outer pins measuring 17.795” apart center-to-center.
It's not uncommon for replacement pads to fit from one brand of nerf bars to the next, but we unfortunately don't have a list to show if there are any cross-reference fitments. view full answer...
I did some checking and for Sealed, Mini LED Side Marker, Clearance or Identification Light # MCL13A2B the mounting holes are spaced 2 inches apart on center. I have linked a video featuring this light for you. view full answer...
I called my contact at Westin Automotive and they informed me that the steps pads on the Westin E-Series Round Nerf Bars part # 23-2860 are 21" long x 3" wide. These nerf bars are a confirmed fit for a 2006 - 2010 Hummer H3. If you are looking for a replacement step pad for the nerf bars you currently have, I would need to know the overall dimension in addition to the peg spacing. Once provided I would be able to see if we have an option for you. view full answer...
I wasn't sure exactly what dimension of the Convert-A-Ball Cushioned Ball Mount/Clevis/Pintle # AMCC2 you were looking for so I went out into our warehouse and measured it in several places and attached a picture of it to show these measurements. view full answer...
Demco Classic Base Plate Kit # DM9518193 is rated for the gross vehicle weight rating of the 2006 to 2010 Hummer H3 or 2009 to 2010 Hummer H3T. So in other words, since it is a custom part designed for specific vehicles, it doesn't have a stand alone capacity. It has the capacity for the vehicles for which it was designed. This is the case for any set of base plates.
For a compatible tow bar I recommend the Excali-Bar # DM9511013. This tow bar is rated for 10,500 pounds and comes with... view full answer...