Expert Answers about Honda

• How Durable is the Plastic Part of Tail Gate Lock PAL6100 for a 2012 Honda Ridgeline
• The plastic part of the Pop and Lock tail gate lock, # PAL6100, is made of ABS plastic which you will see on many automotive accessories. The plastic is fairly sturdy and is supported front to back as you can see it the picture I have included. Considering what the plastic piece has to endure, which is not much, it should last a long time. With that being said it is still plastic and if it were abused or struck hard enough you could see some damage. The lock is also available in white...
  view full answer...


• What are Husky Liner Floor Mats Made Of and are They Legal in California
• The floor mats, # HL51011, are made from a rubberized thermoplastic material which means rubber and plastic. I do not believe that California considers rubber and plastic to be harmful, and certainly not when used as a floor mat. I spoke with my contact at Husky Liners to verify and she stated that the mats are approved for sale in all 50 states.
  view full answer...


• Will Installing the Draw-Tite Class I Trailer Hitch on a 2008 Honda Fit Void the Vehicle Warranty
• Installing the Draw-Tite Class I trailer hitch, # 24776, on your 2008 Honda Fit should not void the vehicle warranty, as long as it is not determined that the hitch itself caused the issue you are taking the vehicle in for service for. Your warranty is protected by the Federal Magnusson-Moss Warranty Act, which states in part that unless the modification to your vehicle caused the problem your warranty must be honored. This being said you will need to use common sense precautions when...
  view full answer...


• Where is the Curt Class I Hitch # C11391 Manufactured
• The Curt Class I hitch, part # C11391, is made in the USA and includes a pin and clip. Note that if used with any non-trailer load, say a bike rack or cargo carrier, Curt requires you to use their stabilizing strap # 18050 which is not a requirement for the Draw-Tite. A helpful hitch install video and article are linked for you.
  view full answer...


• Will Highland Floor Mats # 46022 Stay Secured To Floor on 2008 Honda Element
• The Highland Floor Mats, part # 46022, for your 2008 Honda Element are made of a pliable, premium rubber that will not stiffen or crack, and will help keep the mats from sliding in your vehicle. They are not a hard rubber or plastic material. The small, anti-skid spikes on the back of the floor mat will also keep the mats from slipping if your Element has the carpet flooring.
  view full answer...


• Is the Trim in Pop and Lock Tailgate Lock # PAL6002 Made of Steel or Plastic
• The bezel part on Pop and Lock tailgate lock # PAL6100 is also automotive grade ABS plastic just like the white one, # PAL6101.
  view full answer...


• Where Is etrailer Trailer Hitch Receiver e78KR For 2005 Honda Element Manufactured?
• The etrailer Trailer Hitch Receiver # e78KR you were looking at for your 2005 Honda Element is made in the USA, but the mounting hardware may be imported. The etrailer hitch has a 350lb tongue weight rating and 3500lb trailer weight rating and an attractive black matte finish. If you are planning on towing with your Element you will also need a vehicle wiring harness # C59236 and a hitch ball, ball mount, and hitch pin and clip which can all be found in the etrailer Ball Mount Kit # 989900. I...
  view full answer...


• Where is the Swagman Chinook # S64683 Produced/Assembled?
• I confirmed with Swagman that the Chinook Bike Rack # S64683 is manufactured/assembled in Taiwan. If you are looking for a platform hitch bike rack that is manufactured and assembled in the U.S., I recommend the Saris Freedom Bike Rack for 2 Bikes - 1-1/4" and 2" Hitches # SA4412B or the # SA4412B-FB (with the additional fat bike cradles - up to 5" tires). The Freedom has a 60-pound bike capacity and includes sliding wheel trays let you carry bikes with different wheelbases. Also, the Freedom...
  view full answer...


• Weight of Every Trailer Hitch That Fits 2011 Honda Odyssey
• There are five different hitches that fit a 2011 Honda Odyssey, and I will give you the weights of each. Curt # C12031: 41 lbs Curt # C13068: 44 lbs Draw-Tite # 75270: 44 lbs Draw-Tite # 76025: 42 lbs Draw-Tite # 36417: 38 lbs
  view full answer...


• Are Thule Roof Racks the Same as Factory Roof Racks for a 2012 Honda CR-V
• Most likely the Thule roof rack will have the cross bars in the same location as the factory cross bars since the Thule Roof Rack System for your 2012 Honda CR-V utilizes the factory attachment points for installation. However, there typically are advantages to going with an aftermarket. Usually aftermarket roof racks are much cheaper than a dealer installed rack, as well as being stronger and easier for roof top accessories to attach to. If you went with the Thule Aero Blade roof rack...
  view full answer...


• What is the Thule Outbound Rooftop Cargo Carrier # TH868 Made Of
• The Thule Outbound # TH868 bag is made of Thermoplastic elastomer (TPE) material which gives the cargo bag flexibility and strength without using potentially harmful PVC or pthalates. TPE is a hybrid material made from rubber and plastics that can flex and return to its original shape, increasing the cargo bag's strength and durability. The 5 out of 5 stars rating is the average customer rating. For this particular bag, only 29 customer has taken the opportunity to rate the bag but they...
  view full answer...


• Where Are The Glacier Cable Tire Chains PW1046 Made
• The Glacier Cable Tire Chains # PW1046, along with all of the Pewag brand chains, are made here in the USA. Their production facility is in Pueblo Colorado.
  view full answer...


• Is The Thule Tepui Foothill Rooftop Tent Waterproof?
• Yes the Thule Tepui Foothill Rooftop Tent # TH37HJ is made from water-resistant 600D polyester ripstop and is designed to withstand the elements from all seasons. It is also UV-resistant and mold-resistant. This is a very nice tent that includes a foam mattress to accommodate 2 people. It has a weight capacity of 400lbs and measures 84" long, 47" wide, and 40" tall when open. When closed it measures 83" long, 24" wide, and 9-1/2" tall.
  view full answer...


• Were Are the AirBedz XUV Air Mattresses Made
• I spoke with Pittman Outdoors and confirmed the AirBedz XUV Air Mattresses like part # 341031 are made in China. I am not aware of another similar product made here in the USA unfortunately.
  view full answer...


• Complete Floor Mat Set For 2016 Honda Odyssey That Is BPA Free
• I recommend going with Road Comforts Custom Auto Floor Mats - Front, Middle, and Rear - Black # 3743447A which is a complete set for your 2016 Honda Odyssey. They are BPA-free, odorless, and do not emit harmful chemicals. I attached a helpful demonstration video for you to check out.
  view full answer...


• Wiring For Lippert Components Kwikee Motor for New IMGL Step
• The Lippert Components Kwikee Motor and Screws for New IMGL Step # LC379147 does not come with wiring. It only comes with the 3 mounting screws pictured. The wiring of the current assembly will attach to this motor instead of vice versa.
  view full answer...


• What Grade Steel is Used to Make Weld-On Jack Pipe Mount # BD015279
• I spoke with my contact at Bulldog about Weld-On Jack Pipe Mount # BD015279. It is ASTM A512 low carbon steel.
  view full answer...


• Bolt Size for Draw-Tite Trailer Hitch 75742 on 2014 Honda CR-V
• The Draw-Tite Max-Frame Trailer Hitch Receiver # 75742 referenced in your question, which is confirmed to fit your 2014 Honda CR-V, uses four M10 X 1.25 X 30 CL8.8 hex bolts. If you happen to have any trouble threading the bolts into the frame of your vehicle, cleaning the weld nuts will typically resolve the issue. Because vehicles tend to pick up a lot of dirt and road debris beneath the frame, a good soaking with WD40 on the holes along with a wire brush treatment will allow the included...
  view full answer...


• Available CoverCraft Floor Mats for 2005 Honda Element
• The Hopkins Semi-Custom Auto Floor Mats - PVC - Front - Black Item # HM79140 for the 2005 Honda Element, is made of a strong durable waterproof PVC construction that is easily cleaned but we do not have any with carpet on them. We also offer rear (second row) floor mats, WeatherTech All-Weather Rear Floor Mats - Black Item # WTW20 and then for the cargo area mat, WeatherTech Universal Cargo Mat - Black Item # WT11AVMCB.
  view full answer...


• Where is Rhino-Rack Roof Rack For 2013 Honda Civic Sedan Made
• The Rhino-Rack roof rack that fits your 2013 Honda Civic sedan is made in Australia. The correct parts that make up the rack are the following: - Rhino-Rack Vortex Aero Crossbars # RRVA126B-2 - Rhino-Rack 2500 Series Legs # RRRLKVA - Custom DK Fit Kit # DK319 You made a really nice choice with Rhino-Rack because it is the best value for a roof rack; Rhino-Rack's quality is equal to similar brands, but at a better price point because you aren't paying extra for a specific brand name...
  view full answer...