Yes, you can just replace the motor for your Lippert model 1-065-041012-01, which is the Lippert Components Tuson High Speed 5th Wheel RV Landing Gear Motor # LC141893. view full answer...
The Titan Chain Snow Tire Chains w/ Cams for Dual Tires # TC4821CAM have multiple cams on either side. If you're just missing one cam then you may try installing them to see if the cam is needed - if it is then you can replace it using the Replacement Cam Tightener # TCCAM2.
If the cams are missing from one whole side of the tire chains then you'll need the Replacement Side Chain with Cams and Fastener # TC218SCCAM instead. You can use the Titan Chain Repair Pliers # TCRP2 to accomplish... view full answer...
The correct mounting bracket kit for the Aries # AA3048315 ActionTrac motorized running boards is part # AA3025103. The mounting bracket kit includes all the bracketry, wiring, magnetic sensors, control box and hardware needed to install the ActionTrac motorized running boards on your 2021 GMC Sierra 2500 Crew Cab. view full answer...
I spoke to a representative for Extang today. The tonneau cover you have installed on your 2012 Ram 3500 with the 6.5' truck bed is the Extang Trifecta Signature Soft Tonneau Cover - Folding - Canvas. Extang's representative told me that the replacement tarp for this cover is no longer available, since September of 2021.
As a result, you will have to replace the tonneau cover. The replacement model is the Extang Trifecta Signature 2.0 Soft Tonneau Cover - Folding - Canvas, part # EX94430.... view full answer...
For your existing Husky 16K EZ Roller 5th Wheel Hitch you can use the Reese Replacement Pins and Clips # 6014 to attach it to the base rails. These are standard sized (1/2" diameter and 3-1/4" long) pins that will work perfectly for your older hitch.
I have attached a short video review that you can check out as well. view full answer...
The correct lock for your Extang EnCore model 62445 is the Replacement OEM BOLT Lock for Extang EnCore Hard Tonneau Cover Manufactured after 2015 # EX28620172-28 view full answer...
The Mighty Cord Replacement 7-Way RV Style Trailer Connector # A10-7072VP will replace the 7-way connection on the back of your 2003 GMC Savana Van. This will plug in to the factory wiring harness.
If you need to replace the OEM harness that part will need to be sourced from a GMC Dealer. view full answer...
The Thule Replacement QM3 Quick Mount Hardware kit you referred to is compatible with your Thule Mountaineer cargo box. I've confirmed this with Thule.
The mounts will fit crossbars up to 3-1/2 inches wide, as long as the crossbars on your Yukon aren't wider than that, the mounts will work well for you.
You can see how the pieces of the mount kit fit together in the diagram I provided for you. view full answer...
I was able to get in touch with my contact over at Extang and they confirmed that you can use the # EX43445B as the replacement cover for your original Extang Trifecta tonneau cover. view full answer...
I do have a potential solution for you, but we do not carry a direct replacement for the wired controller on the # BD500600. You may be able to acquire one directly from Bulldog, but we do not carry them here.
I can offer you the wireless remote kit # BDW62SB. This is a universal kit that will work on any bulldog winch to upgrade the controller to a wireless remote. This would be hardwired into the existing control cable. view full answer...
The correct replacement fabric for the TruXedo Lo Pro Soft Roll-up Tonneau Cover on a 2015 GMC Sierra 2500 6-1/2' bed is part # TX572001-CVR. view full answer...
The replacement hardware for the Westin Sportsman Grille Guard # 40-3695 on your 2014 GMC Sierra 1500 can be found with the part # 40-369PK. This includes all the necessary hardware to mount this particular grille guard to your Sierra. view full answer...
The Timbren Rear Suspension Enhancement System # TGMRG25C do not come with replacement springs available. Unfortunately you will need to get both springs to replace your missing spring. To ensure you don't lose another spring, I recommend using the Loctite Threadlocker 262 - High Strength # LT37420. This will keep the threaded bolt from vibrating loose over time. view full answer...
The driver's side railing of your TruXedo TruXport Soft, Roll-Up Tonneau Cover # TX273301 can be replaced with part # TX2733-LeftRail. If you ever need to replace the passenger's side as well then you'll need part # TX2733-RightRail. view full answer...
The Truxedo replacement cover, part # TX239801-CVR does indeed already have the Velcro stitched in to it. If your original cover was a Truxedo TruXport # TX239801 Tonneau Cover, this is the replacement cover you'll need. view full answer...
Having the 271101 number from the bottom of your current tarp actually makes life significantly easier. This will mean you have the TruXedo TruXport # TX271101 Soft Roll-Up Tonneau Cover and the Replacement Tarp # TX271101-CVR will be the direct replacement.
Before adding the part to your cart, make sure to enter the serial number. This is a verifier for TruXedo and it really does help when it's entered. view full answer...
The Roadmaster XL Base Plate Kit - Removable Arms # 131-15 will use the Roadmaster Replacement Arms for Base Plate Kits # RM-ARMS. Because these will be custom fit, they are only available in pairs and are non-returnable. There is a form to fill out for the correct part attached. Please allow the stated time on the product page for delivery. view full answer...