Expert Answers about GMC Yukon

• Recommended Aftermarket Trailer Brake Controller for 2015 GMC Yukon with Tow Package
• Based on my research, if your 2015 GMC Yukon did not come from the factory equipped with the OEM brake controller, this is not something that can be added. It looks like the logic and programming will be completely different on your model Yukon, so the IBC cannot be installed. Using the correct pigtail/harness will work to physically plug the IBC into your vehicle, but the computer simply won't be able to recognize it. With that being said, you still can absolutely (and easily) install...
  view full answer...


• How to Pick Out Replacement Landing Gear for 2010 Jayco Designer
• In order to pick out a direct replacement for the landing gear on your trailer we would need to know the distance between the mounting brackets. Otherwise you could just have the brackets removed from your trailer by a qualified welder and then install the brackets that come with the Reese Tandem Landing Gear Set # RP500708. Either way this landing gear set would work well for you, you just might have to have the brackets of your trailer removed and then install the brackets of the Reese...
  view full answer...


• Towing Mirror Recommendation for a 2015 GMC Yukon
• We can offer you universal-fit mirrors that will work just fine. A popular option is the K-Source Universal Clip-On Towing Mirror # KS3891. The linked video illustrates their construction and installation. I spoke with my contact at CIPA and because the 2015 GMC Yukon has a new mirror design there are no custom fits available. All universal-fit towing mirrors are shown on the link.
  view full answer...


• Recommended Front Mount Trailer Hitch for a 2014 GMC Yukon and Yukon XL
• The only front mount trailer hitch receiver that we offer at this time for a 2014 GMC Yukon and Yukon XL is the Curt Front Mount Hitch # C31012. This is a 2 inch hitch that offers a 9,000 lbs Line Pull capacity and a 500 lbs Vertical Load capacity. To help give your front mount hitch a clean look when not in use and to show off your support for etrailer you can use the etrailer.com Rubber Hitch Cover # 22282. If you are more worried about possibly hitting a parking block you can use the...
  view full answer...


• Bike Rack for Towing for GMC Yukon
• We have a few options to accomplish what you are wanting to do. You could go with a towing bike rack that features an integrated slot for a ball mount, like the Swagman Original towing rack, part # S64675. The only possible drawback to using a towing bike rack is the fact that when towing with it, the tongue weight capacity of the rack is pretty low, 350 lbs. This includes the rack, the weight of the bikes on it, and the trailer tongue weight. If you have a very small trailer with a low...
  view full answer...


• Interchangeability of Weight Distribution System Parts
• If the Fastway round bars just so happened to fit in a Reese (Draw-Tite) weight distribution head, it would be purely coincidental. Neither manufacturer will confirm that their components will work with those of a competitor. When Draw-Tite or Fastway states that a given system is rated for a specific tongue weight, it is because each component of the system has been designed and rigorously tested to ensure that they work together. Once one component is replaced with another part, you...
  view full answer...


• Jack Recommendation for Travel Trailer for Changing Flats
• Going with a bottle jack like the Powerbuilt Unijack Bottle Jack with Built-In Jack Stand # ALL620471 would be what I would recommend. Since it doubles as a jack stand it gives you the ability to jack up the trailer and safely hold it at the height you want when changing the tire.
  view full answer...


• What RV Hitch do you Recommend for my Highland Open Range 328BHS
• For you Open Range 328BHS I really like the Curt Adjustable Trailer Hitch Receiver part # C13701. It is as you requested designed to bolt on to the frame of your camper and will allow you to use the cargo carrier or bike rack that you have. It offers a 500 lb. tongue weight rating to get your gear where you need it safely.
  view full answer...


• Convert Surge Brakes to Electric Brakes on 1999 Jayco Heritage Pop-up
• We actually have a help article that was designed basically for your exact situation that will walk you step by step through the process of picking out correct components to convert your trailer to electric brakes. Check out the link that's on this page to see it. You will need to install a brake controller in your 2003 GMC Yukon as well. For a brake controller I would recommend the Prodigy P3 Brake Controller part # 90195. This is our best selling brake controller because of how well...
  view full answer...


• Is There Frame Drilling Required to Install Blue Ox Base Plate Kit on 2021 GMC Yukon AT4
• For your 2021 GMC Yukon AT4 the correct Blue Ox base plate kit is the part # BLU54VR which does require some minor drilling. You will use the base plate as a template to drill a couple small holes on frame of vehicle.The front fascia does require some minor trimming.
  view full answer...


• Can Curt Spectrum Brake Controller Install in 2011 GMC Yukon
• The Curt Spectrum part # C51170 can install easily in your 2011 GMC Yukon with the factory wiring it has under the dash with the universal wiring harness part # C51515 but like you mentioned it has to wire directly to the brake controller wiring under the dash as there isn't a connector present for a plug-in type install. To see how a similar brake controller installs in a Yukon like yours check out the install video link I attached to this page.
  view full answer...


• Class 3 Trailer Hitch Fit for 2002 GMC Yukon
• The Curt # C13402 is a class III hitch and is confirmed to fit your Yukon. This hitch installs without drilling and has a 600 lbs TW and 6,000 lbs Towing Capacity. I attached the installation instructions for you to check out.
  view full answer...


• Best Looking Brake Controller Recommendation 2013 GMC Yukon
• The Redarc Tow Pro Liberty part # RED24FR with the install harness part # RED69FR would be the best option for your 2013 GMC Yukon. This puts only a small knob on the dash of your Yukon like you want and gives you a proportional brake controller that applies the same amount of braking pressure as your tow vehicle. The mentioned harness wires directly to the wiring under the dash of your Yukon.
  view full answer...


• Recommended Brake Controller For A 2022 GMC Yukon With Factory Tow Package
• Having the tow package on your 2022 GMC Yukon definitely makes life easier. You do already have a hitch installed, but you also have a port under the dash that is specifically there for a brake controller to attach to. With that being said, I have two options listed out below. Both are good options, but one will be a more economical option, and one will be a more premier option. For the economical option, you will want to check out the Tekonsha Primus IQ TK90160. This can handle trailers...
  view full answer...


• Replacement Hardware Kit for Westin Bull Bar for a 2002 GMC Yukon
• If you have a Westin Bull Bar for a 2002 GMC Yukon you would have part # 32-1175. The correct replacement hardware kit would be the part # 32-117PK.
  view full answer...


• Weight Distribution Recommendation for a 2005 GMC Yukon Denali Towing an 8,000 Pound Trailer
• In order to choose the correct weight distribution system, you will need to know the tongue weight when loaded and ready to tow. The tongue weight includes the tongue weight of the trailer AND anything loaded in the tow vehicle that is behind the rear axle. There are a couple of ways to determine tongue weight. You can use a tongue weight scale, # e99044. There are a couple of other methods and I have included a link to an FAQ article that explains how to do each one. Tongue weight should...
  view full answer...


• Brake Controller Installation Parts Needed for A 1997 GMC Yukon with a Prodigy P3 Brake Controller
• When wiring up a 1997 GMC Yukon it is recommended you install a Brake Controller 7 & 4 Way Installation Kit # ETBC7 as the wiring that you have found is often difficult to access and you will need to run additional wiring regardless. The # ETBC7 kit will eliminate any guess work and will come with everything needed to wire up your Tekonsha P-3 Brake Controller # 90195. I attached installation instructions for the # ETBC7 as well as an installation video for you to check out. Most likely...
  view full answer...


• 2013 GMC Yukon Denali Curt Cargo Carrier and Bag Fit Recommendation
• Yes, the etrailer Cargo Carrier part # e98874 is going to fit the factory 2 inch hitch you have on your 2013 GMC Yukon Denali. The etrailer.com Cargo Bag part # 988501 would also work well as it's dimensions closely match the dimensions of the carrier. I attached review videos for both product for you to check out as well.
  view full answer...


• Stable Cargo Carrier Needed When in the Folded Up Position for a GMC Yukon Denali XL
• We have several Folding carriers designed to fit in a 2 inch hitch, see link. The problem you are experiencing with cargo carriers wobbling in the upright position is inherent to the folding style of carrier and I have not seen one yet that fully addresses this issue. The folding aspect also requires that the carrier be basically level or just below level when folded down. This design is needed to keep the carrier from bouncing in the hinged portion when encountering hard bumps on the...
  view full answer...


• Which Stromberg Carlson Bumper Mounted Tire Carrier Should I Use, # TR-1 or TR-2
• The only difference from the Bumper Mounted Tire Carrier, part # TR-1, and part # TR-2, is that part # TR-2 folds down to provide access to storage areas when mounted to your RV. If you think the folding feature would come in handy, I would recommend part # TR-2. If you think you can do without the folding feature, part TR-1 will work just fine. Part # TR-1 may also be a little quieter when mounted, as it is all one piece. I contacted our representative at Stromberg Carlson about what...
  view full answer...