Hi Shannon,
The Access Vanish Soft Tonneau Cover # A55FR for a 2019 GMC will unfortunately not fit a 2023 Ford F-150. I'll go ahead and list out, by bed length, the Vanish tonneau covers that fit a '23 F-150 to make it easy for you to order.
- 5-1/2 Foot Bed: Access Vanish Soft, Roll-Up Tonneau Cover # A91369
- 6-1/2 Foot Bed: Access Vanish Soft, Roll-Up Tonneau Cover # A91379
- 8 Foot Bed: Access Vanish Soft, Roll-Up Tonneau Cover # A91389 view full answer...
Great question Andrew, so the Yakima Overhaul with T-Slot adapters part # Y01151-5755 that you referenced does fit the OEM Ford tonneau cover you have installed on your 2023 Ford Ranger Raptor as it was confirmed as a fit for the Ford tonneau T-slots. You would be able to trim the pads down flush like you asked about so that the fit is flush. view full answer...
The very best tonneau cover available for your 2024 Hyundai Santa Cruz SEL is the Lomax Stance Hard Tonneau Cover # LOM96DR. This has black urethane aluminum and is a perfect low-profile custom fit. view full answer...
Hey Edgardo, so the only ladder rack that can fit with your BAKflip MX4 tonneau cover on your 2022 Ford Ranger and allow the tonneau cover to open while installed is an Adarac Pro Series like the part # A96ZR for if you have a 6 foot bed or the part # A64RR if you have a 5 foot bed. This is only option that installs to top of bed rails which allows the tonneau cover to be installed at same time and has vertical uprights which allows the cover to fold as well. view full answer...
The Yakima OverHaul HD Adjustable Truck Bed Ladder Rack w/ Tonneau Cover Adapters # Y01151-5855 will only fit if your 2019 GMC Sierra 1500 has a tonneau cover with T-Slots in the rails. Since all of the folding covers have standard rails we'll need to get your truck equipped with a retractable cover instead. And for that I recommend the Pace Edwards UltraGroove:
- 5-3/4' Bed # 311-KRCA27A58
- 6-1/2' Bed # PE97UV
- 8' Bed # PE32CV view full answer...
Yes, there is and congrats on the new truck! For a hard folding tonneau cover that is ladder rack compatible, I recommend the BAKFlip MX4 Hard Tonneau Cover item # BAK78AV. This cover fits the 2024 GMC Canyon's with the 5' bed. This quad-fold cover sits inside your GMC Canyon's bed rails which means it is compatible with sliding ladder racks. It has a matte black finish and is made of 1/2" rustproof aluminum panels.
For a ladder rack, I recommend the Thule T-Rac Pro2 Truck Bed Ladder... view full answer...
Hi Daniel; while there is a fit for a toolbox compatible tonneau cover on your 2006 Ford F-150 with a 5-1/2 foot bed, the exact model number you mentioned isn't one of them. The only option for your truck is a tonneau from Access:
- Access Toolbox Edition Soft, Roll-Up Tonneau Cover # A61269
This will work with 19" - 21" truck bed toolboxes. view full answer...
Hello Josh. The Pace Edwards JackRabbit Retractable Tonneau Cover w Contractor Rig Rack # JEC5468-CR4005 is a great choice for a Tonneau/Ladder Rack Combo. Unfortunately, there is no toolbox system that is designed specifically to work with this. The best option I can offer is a universal toolbox like the Buyers Products Utility Storage Box # 3371712240. This is a 44" x 19" x 17-1/4" black polyethylene lockable toolbox. It can go pretty much anywhere in the bed and it will fit nicely under... view full answer...
Since the System One style ladder rack installs on the inside rails this makes it incompatible with soft roll up tonneau covers. For the 2024 Chevrolet Silverado 3500 short bed I recommend the TruXedo Elevate Truck Bed Rack System # TX46NV which is going to be compatible with the TruXedo Lo Pro Soft Roll-up Tonneau Cover # TX573301. view full answer...
The BAKBox 2 Collapsible Truck Bed Toolbox # BAK92120 is specifically designed to mount to the side rails on BAK tonneau covers which are going to be different on your REV cover. So you will need a toolbox which fits down inside the bed like the UWS # UWS36QR. view full answer...
Yes, the Replacement Cab End Corner and Weather Seal Kit for TruXedo TruXport Tonneau Covers # TX1118262 would be a compatible fit for your cover. If you need to replace the rear caps as well then you'll need part # TX1704534, # TX1704535 , and # TX1703568. view full answer...
Good morning, Stephen. The TruXedo Pro X15 Soft Tonneau Cover # TX1498301 is going to be compatible with most bed liners. If the underside of the bed rails are open and free from your bed liner, then this tonneau cover will fit. If the bed liner covers up the underside of your bed side rails, then a modification of the bed liner may have to done in order to install the cover. view full answer...
Hey Ryan, the etrailer Soft Tonneau Cover # e25DR you're looking at is not going to fit your Tacoma. Instead, I recommend going with the Extang E-Series Soft Tonneau Cover # EX65UV.
It's a bit higher in price than the etrailer cover, but it's got the same soft folding design, and will 100% fit your Tacoma. view full answer...
Hey there Harry, that's a good question, as the difference is the strength of the aluminum vs. polycarbonate Retrax tonneau covers that fit your 2024 Ram 3500 with a 6-1/2 foot bed.
The aluminum RetraxPRO MX Hard Tonneau Cover # RT80232 has the most strength, with a 500 lb weight capacity; its aluminum construction also means it isn't going to rust so it's the toughest of the two.
The polycarbonate RetraxONE MX Hard Tonneau Cover # RT60232 isn't exactly frail, but its weight capacity... view full answer...
Hey there Cindy, thanks for the question and I think you meant tonneau cover instead of Tahoe? If so, the tonneau cover will need to be rolled up, of course, and so long as it is the Rightline Truck Bed Tent # RL110765 will fit your 2017 Toyota Tacoma with a 5-1/2 foot bed. view full answer...
For your 2006 GMC Sierra 1500 with a 6-1/2 foot bed we do have a snap on style tonneau cover that fits with the Truxedo TruXport # TX281101. This is the only snap on style cover we have fits your truck. view full answer...
Hi Eric,
The Pace Edwards Bedlocker Retractable Hard Tonneau Cover # PE62CV unfortunately would not be a fit for dual rear wheels but Pace Edwards does still have a few options that are confirmed to fit:
-Pace Edwards JackRabbit Retractable Hard Tonneau Cover - Aluminum and Vinyl - Matte Black # PE54UV
-Pace Edwards Full-Metal JackRabbit Retractable Hard Tonneau Cover - Aluminum - Matte Black # PE82CV
The only real difference between the two is that the # PE54UV has an aluminum and... view full answer...
Yes, we have the Yakima Overhaul HD ladder rack part # Y01151-5955 which comes with adapters that fit the T-slots that you have on your Retrax tonneau cover. This gives you a really nice rack that is adjustable in height and span between the bars as well. view full answer...
The Access Toolbox Edition Soft, Roll-Up Tonneau Cover # A64169 for your 2018 Ram 1500 with a 5'7" bed will only allow for a 19"-21" deep tool box. According to the Decked website their tool box for your truck is 22" deep. You can check yours to verify if yours is any less deep and could possibly fit.
As this is our only tool box compatible tonneau for your truck you may have to switch to a different tool Box # DZ9170 if you want to have both. view full answer...
We do not have an Extang Encore tonneau that fits your 2020 Chevy Silverado 1500 6.5 foot bed at this time so your best option would be the E-Series part # EX79UV which is a similar soft folding cover that fits your truck. view full answer...