The quick disconnect outlet on your Rockwood is already regulated so you need new hose that doesn't have a regulator on it. The hose needs a quick disconnect on one end of course and a 3/8 female flare on the other.
We carry two hoses with these connections:
60 inch part # 100304-60-MBS
120 inch part # 100304-120-MBS
You didn't say how long it needs to be but they'll both do the job. view full answer...
I actually went out to our warehouse and measured the:
-Replacement Sidewind Handle Shaft Bushing for etrailer and Ram Square, Direct Weld Jacks # TJD-7000S-BU with a set of calipers # PTW80157, and measured:
-30.09 mm (1-3/16") for an overall diameter,
-23.02 mm (.91") for an overall diameter of the inner circle,
&
-21.64 mm (.85") for an overall diameter of the inner circle to the flat piece (shown in image).
I have attached a diagram depicting these measurements for you to check... view full answer...
Based on the noise you are describing, it sounds like the brake assembly on the driver side is out of adjustment, or is sticking.
This is pretty easy to check by taking a look at the included article that goes over adjusting trailer brakes, and first making sure your brakes are adjusted correctly. Using a trailer brake adjustment spoon like # W80630 will make the adjustment process easier. If they are, then next you will want to remove the hub to make sure no grease from a failed grease... view full answer...
I looked up your Rockwood Ultralight 2905WS and found that it normally has a triple step setup so for a Kwikee power step that would work great we have the 23 Series part # LC3694042. view full answer...
Yes, we have that exact stereo available, so if you are looking to replace yours with another in your travel trailer, here is what you will need:
- Furrion RV Stereo - Double DIN - HDMI, AUX/USB, Bluetooth - 3 Zone - 12V # DV1230BL view full answer...
Hey Jeff, from previous customers who have given us the part number you mentioned we have found that the matching MORryde StepAbove is the part # MR65RR which has 23.5 inch wide steps and is a 3-step setup with the strut assist. view full answer...
I am sorry but we do not carry any replacement storage doors here at etrailer. We would have the locks and latches, but not the doors themselves. I recommend contacting a Forest River Dealership for information on how to obtain one. view full answer...
Yes, the Convert-A-Ball Cushioned 5th-Wheel-to-Gooseneck Adapter # CAB-C5G would clamp onto the king pin of your fifth wheel's pin box allowing you to tow using the gooseneck ball in the bed of your 1997 Ford F-250. That being said it has the following stipulations:
1. Not recommended for use with Reese Elite Series gooseneck trailer hitches. Verify the brand of your gooseneck hitch.
2. Not recommended for use with factory-installed towing prep packages which use a hitch ball with an integrated... view full answer...
I'd say you found the smoking gun and it's because he "may have hit something". I'd inspect for further damage as it's likely there's more. I'd also use a circuit tester like part # PTW2993 to see if you can find voltage to the motors and everything else to help pinpoint where the problem is. My guess is that the simple answer is that he took out wiring to the jacks when he hit something and that's why it all stopped working. view full answer...
The place to measure on your trailer for picking out correct rise/drop is actually from the bottom of the coupler lip. So since you measured from the top of where the ball fits into the coupler you'd need to subtract about 2 inches from that so you'd have 17 inches. So difference between 23 inches and 17 inches is 6 inches which means you'd need a drop of inches. So since you have a Curt Rockerball that adds 2 inches you'd need a 8 inch drop then.
So for that you'd want the part # C45338... view full answer...
The typical tire size for a 2018 Rockwood Mini Lite 2511s is a 205/75-14. We do have some options that might aesthetically match your existing wheels. For example, we offer the Westlake ST205/75R14 Radial Tire w 14" Jaguar Aluminum Wheel - 5 on 4-1/2 - LR D - Gray, part # 274-000014. This is an aluminum wheel that comes with a load range d radial tire.
I have included a product description link, a video demo link, and a link to our aluminum wheels that are sized 205/75-14 below. view full answer...
We have exactly what you need!
For your 82" slide-out you can use the:
- Solera RV Slide-Out Awning # LCV000165062.
And
For your 151" slide out, you can use the:
- Solera RV Slide-Out Awning # LCV000165061.
Both of these toppers are black in color, and the fabric is made with 13.5-oz vinyl, and won't crack in cold temperatures. view full answer...
Protecting the underside is wise for maximizing the overall life of your camper. The Forest River Rockwood Geo Pro Trailers have Dexter Torflex Axles, so we do have lift kits available. However, there are different lift kits depending on which particular Dexter Torflex Axle you have, and unfortunately I don't have this information. Therefore, you will need to look at the axle tag on the tube and determine the axle capacity and/or model number. I have attached the two options below, which... view full answer...
The least expensive option for a camera setup for your Rockwood that was pre-wired for a Furrion setup is the # FOS43TASF. Anything else would be much more difficult to install and honestly wouldn't work nearly as well. The Furrion kits by far have the best reception so it wouldn't be worth it to try and find something less expensive as this would give you poor reception overall. view full answer...
The correct braking assembly kit for a Dexter 4,000 Lb Axle is the Dexter Electric Trailer Brake Kit part # K23-462-463-00 for manual adjust or Dexter Nev-R-Adjust Electric Trailer Brake Kit part # K23-478-479 for self-adjust. These are almost the same as the brakes for a Dexter 3,500 Lb Axle expect for the magnet size which is much smaller therefore they are weaker and the mounting flange pattern is slightly different. Please note, manual adjust brakes require user adjustments every so... view full answer...
Hi Larry,
In order to determine the correct hub/drum assembly for your trailer we'll need to first determine the bearings and grease seal part numbers so we can check compatibility. The Dexter Trailer Hub & Drum Assembly for 3,500-lb Axles # 84546UC3-EZ uses the following bearing and seal combination:
Inner bearing # L68149 (1.378" inner diameter)
Outer bearing # L44649 (1.063" inner diameter)
Grease Seal # 58846 (1.719" Inner diameter)
If you're not planning on going anywhere until... view full answer...
Since you need more drop than the ball mount you have now which has a friction sway control attached to side of it the easiest solution would be to go with a bracket like the part # RP26003 which fits over the ball mount platform and allows you to basically use whichever ball mount you need to provide correct rise/drop to tow trailer level. We also have weld on tabs for the bracket as well like with the # 3442.
I also attached a link to a page that details how to pick out the correct... view full answer...
We don't offer a 235/75-15 tire pre-mounted on a wheel with the bolt pattern you're looking for, but we do offer an off-road radial part # WST54FR that could be purchased separately from any of the 15x6 aluminum trailer wheels we offer with a 5 on 4-1/2 bolt pattern such as the Lionshead # LH35FR wheel.
The tire is a 235/75-15 radial in a load range D, which has a capacity of 2910 lbs per tire/5820 lbs per axle.
I've linked to videos for the wheels and tire mentioned above. view full answer...
We have exactly what you need! If you just need one then part # 58846 is what you're looking for but if you need to replace 2 of them then you'll want to go with part # RG06-050 instead.
Attached is a video showing how to replace the bearings and seals on an axle for you to check out. view full answer...
The closest wheel and tire we have to the # LH29FR that has a 5 on 4-1/2 inch bolt pattern is the Taskmaster ST225/75D15 Bias Ply Trailer Tire - Load Range D # TTWSF22515D and the Aluminum Sendel Series T02 Machined Trailer Wheel - 15" x 6" Rim - 5 on 4-1/2 # AM22653 which is a similar wheel design. This is the same size tire that has a capacity of 2,540 lbs and a speed rating of 81 mph. You will need to have the tire mounted to the wheel at a local shop upon delivery. view full answer...