We have a set of nerf bars that will fit your 2006 Ford Escape. They are the Westin E-Series Round Nerf Bars - 3" - Black Powder Coated Steel item # 23-1975. These are our only option for a vehicle that old. They are 3" wide and include a custom no drill installation kit. view full answer...
Hey David, actually what is going to make the biggest improvement in handling and stability for your 2011 Itasca is an upgraded rear sway bar with the part # RM-1139-175. I know that's not what you asked about but for motorhomes where most of the weight is out back the rear sway bars make a huge improvement. You won't see much of a difference going to a different steering stabilizer.
This is also true for SumoSprings. A rear set like the part # SSR-118-54 with the rear bar will make a... view full answer...
Hey Linda, the e-bike rack I recommend for your e-bike that has a step thru frame and fenders is the Yakima OnRamp part # Y96FR that you referenced as this hitch is RV rated like you need for your Class C motorhome, has frame clamps that were designed for step thru frames, and it has a ramp setup that makes loading and unloading much easier. view full answer...
Yes, we can get your 2013 Ford F-250 set up with air bags and a compressor to give it the best possible support for when you are towing your trailer. A one inch lift won't require the use of any spacers (in fact, the smallest spacer is 1-1/4"), and the best options for air bags are from Firestone, with the correct fit for your F-250 being the following:
- Firestone Ride-Rite Air Helper Springs # F2597
The Ride-Rite air bags are easily the best because they are the most well-constructed... view full answer...
The # BWRVK2602 is designed to fit the 2014-2024 Ram 2500. For your 2024 Ford F-250 you need the B&W Custom Installation Kit w/ Base Rails for 5th Wheel Trailer Hitches # BWRVK2402 instead. view full answer...
For a third brake light camera I recommend the Custom Third Brake Light Camera # 3460006. This camera adjusts 360 degrees with a 150 degree viewing angle and will be compatible with the 8" monitor in your F-250 Platinum. view full answer...
Hey Prasanna, so all of the instructions should come with the products but to start you're going to need to add a 4 pole if you don't already have one with # HM11143115.
From here, you'd just need to tee into the 4 pole you've just added and install the Universal Installation Kit for Trailer Brake Controller # ETBC7 which will now give you a 7-way. view full answer...
No, you couldn't. You could get that outside nut off but the rest of the Replacement Locking Quick Release Skewer for Swagman Bike Rack item # S65YR would still secure the bike in the rack.
I have linked a review video below for the Swagman Patrol Truck Bed Bike Rack item # S64701 that the Swagman item # S65YR is designed for. If you skip ahead to the 3 minute mark you will see the lock being set up. view full answer...
The best air bags that fit your 2022 Ford F-250 Super Duty 4x4 and that are compatible with a 5th wheel hitch are from Firestone:
- Firestone Ride-Rite Air Helper Springs # F35FV
The Firestone Ride-Rite # F35FV are easily the best option because they are the most well-constructed air bags on the market. The reason for that is the Ride-Rite air bags are made with four layers of reinforced rubber, which is a thicker and more reliable construction than other air bags that have just two layers... view full answer...
When installing the Redline Weatherstrip Tape # WS1434 on your Pace American Car Trailer, you'll want to install it at the top around your ramp door.
So this would be the top of the door towards the back, as you describe it. view full answer...
Hi Tom,
We don't currently offer the a version of the Better Bath # LC209795 with a 10-1/2" height but we do offer the Better Bath RV Shower Pan # LC298087 and # LC325246 which are slightly smaller at 27" long x 27" wide as options with a 10-1/4" (LC298087) and 10-7/8" (LC325246) height and front access panel. view full answer...
The Reese Max Duty Underbed Custom Mounting System # RP32VR is designed with a different spacing (29" x 16-3/16”) than other puck systems and is currently only compatible with the Reese M5 5th Wheel Trailer Hitch for Max Duty # RP72VR and Reese Above-Bed Gooseneck Trailer Hitch for Max Duty # RP62VR. At this time there isn't a slider version of the Max Duty 5th wheel hitch but Reese will likely offer one in the future.
If you have a 6-1/2' bed then I recommend the B&W Companion 5th Wheel... view full answer...
Technically none of the hitches made for the 2022 Ford Escape are designed to fit the PHEV model. However, we do have a review from a customer who successfully installed the etrailer # e89YR on their 2022 PHEV. They did take this to a local installer and said it was a bit more complicated, so it is unknown if any modifications were made. It took about an hour to install the hitch so it doesn't sound like it took any extensive work to make it fit.
I have attached an installation video... view full answer...
The Lionshead Steel Dual Wheel, 4.75" Pilot - Silver, Item # LHHA420 is a 16" x 6" wheel with an 8 on 6-1/2 bolt pattern, so as long as your Class C motorhome wheels have the same bolt pattern and are the same 16" x 6" diameter and width, you can use them as a replacement. If your wheels have 8 lugs, it will be an 8 on 6-1/2 bolt pattern, but if you can tell me what size tires you're currently running I can tell you whether or not this wheel will be wide enough.
I've also linked our helpful... view full answer...
If you'd prefer something that would be easier to move around the Ultra Fab part # UF48-979033 weighs about half of the K2 you mentioned which was discontinued but would be a little harder to load and unload due to it's shorter ramp. I have a carrier like this and I really like it so it would work great for you. view full answer...
Yes Jerry, the Bluetooth Control Kit for Pace Edwards Electric Tonneau Covers # PE63QJ should work fine between the canister and a tool box but you can fire it up and test it prior to mounting it.
If you find that the signal isn't as strong, or that it's not responding you can just move it to a place with better signal. view full answer...
Hey Tom, yes the Curt TruTrack weight distribution system part # C69JR that you referenced would work just fine towing a trailer that weighs 8,000 lbs. As long as the tow vehicle has a 2 inch hitch you'd be good. view full answer...
Hey Donovan, it sounds like you are looking for a shank for your weight distribution system with enough drop to work with your WD system and your lifted truck. While I don't know what system you have the Curt shank part # C17123 was designed to basically fit nearly all other brands of WD system heads and also fits the 2 inch hitch size. view full answer...
Absolutely. The Curt Adapter Rails # C88KR you're referring to will work with just about any standard mounting sliding (or fixed) 5th Wheel Hitch, including the older Reese sliders like # RP30051. Just let us know if you have any other questions! view full answer...
Go To Results