Richard, to replace your UFP HD-1377-10 hub and drum you can use the Dexter Trailer Hub and Drum Assembly for 3,500-lb Axles # 84546UC3, the Dexter Nev-R-Adjust Electric Trailer Brakes # 23-468-469, and the mounting hardware # BRKH10B. view full answer...
The Hydraulic Trailer Brake Kit # AKFBBRK-35 does not come with hub and drum assemblies. It looks like you already figured this out since you ordered the Trailer Hub and Drum Assembly # AKHD-5475-35-K along with the brakes. view full answer...
Hello Chuck. The Hydraulic Trailer Brake Kit # AKUBRK-35 does not include drums. This is a brake kit so it includes a left hand and right hand brake assembly.
If you need hubs/drums, the hub that would generally go with this is the Easy Grease Trailer Hub and Drum Assembly # AKHD-545-35-EZ-K. This hub uses the standard # L68149 (1.378" inner diameter) inner bearing and # L44649 (1.063" inner diameter) outer bearing. It also uses the standard 5 on 4-1/2" bolt pattern so please do check... view full answer...
Hey Ed,
The Easy Grease Trailer Hub/Drum Assembly # AKHD-545-35-G-EZ-K uses grease seal # 58846 and are made by AxleTek, who is not in the U.S. The Dexter Trailer Hub & Drum Assembly # 84546UC3-EZ and # 84546UC3 uses the same grease seal part number, though the hub/drums and bearings/seals are from Dexter, which is a U.S. company.
The difference is the # 84546UC3-EZ is both pre-greased, comes with the washers and cotter pin, as well as a standard grease cap and EZ-Lube grease cap if you... view full answer...
The 3,500 lb trailer hub/drum part # AKHD-545-35-K that you referenced is sold individually. If you needed two you'd need to order a quantity of two. view full answer...
Anthony, to find the correct replacement brake drums and hubs you are going to need to take a digital caliper # PTW80157 and measure your spindle using the diagram attached and let me know what those measurements are. view full answer...
Thanks for the picture! I think you meant part # DX34XR not part # DX34FR which is just a Crossover Hydraulic Brake Line.
The Dexter Trailer Brake Drum item # DX34XR has a 8 on 6-1/2 bolt pattern and a 4-3/4" Pilot hole diameter. It works with Dexter 12,000 lbs low-profile axles, 12,000 lbs hi-profile axles, and 15,000 lbs axles. This is a replacement part for the Dexter 9-28 brake drum you sent a picture of.
If you need the entire assembly you would want the Dexter Trailer Hub and Drum... view full answer...
Hi Ryan; thanks for all that info and we do have exactly what you need to replace the hub and drums, electric brakes, and bearings on your pop-up camper with a 3,500 lb axle.
Just note the hub and drum comes with the bearings already, so you don't have to buy them separately, but I'll list out the bearing kit in case you want that for when you replace them down the road.
- Trailer Hub and Drum Assembly # AKHD-545-35-K
- Electric Trailer Brakes - Self-Adjusting # AKEBRK-35-SA
- Mounting... view full answer...
Hey there Jeremy, and the short and sweet answer is yes, a 3,500 lb hub and drum with a 6 on 5-1/2" bolt pattern will indeed have the same bearings as a 3,500 lb hub and drum with a 5 on 4-1/2" bolt pattern.
So you can go ahead and use the 6 on 5-1/2" bolt pattern, 3,500 lb Trailer Hub and Drum Assembly # AKHD-655-35-K. view full answer...
Hey Shawn,
Based on the 167806 part number you provided you should have 5,200lb axles. Lippert used to offer 5,200lb hubs/drums with these axles but later dropped them and switched to just 6k hub/drums so I'll have two different outer bearings depending on the hub that you have:
5,200lb Hub/Drum outer bearing # LM67048 race # LM67010
6,000lb Hub/Drum outer bearing # 15123 race # 15245
Inner bearing for both hubs # 25580 race # 25520
Grease seal for both hubs # GS-2250DL
For the brake... view full answer...
Yes, the Dexter Electric Trailer Brakes # 23-180-181 will indeed be compatible with the Easy Grease Trailer Hub and Drum Assembly # AKHD-655-6-EZ-K. The brake assemblies use the standard 12" x 2" brake shoes, and the hubs are designed to work with this same standard sized brake assembly. view full answer...
Hey Derrick, the good news is yes it does exist. So what you're going to want is the Hydraulic Trailer Brake Kit - Uni-Servo - Free Backing # AKFBBRK-35 for brakes, and the 10" Hub and Drum for 3.5K Axle # AKBD2-545-97 for the hub and drum.
This hub and drum has a 10" x 2-1/4" diameter, a 5 on 4-1/2" bolt pattern, and is designed for 3,500-lb axles.
Along with the hub and drums and brakes, you're also going to need the grease seal # 58846, the inner bearing # L68149, the outer bearing... view full answer...
The Dexter Trailer Hub and Drum Assembly # 8-219-18UC3 is only sold as a single assembly since it is not required to replace both sides at the same time. You will simply need to be sure to order the total amount of hubs you need. They are also not left or right specific so you can use them on either side. view full answer...
Yes Dennis, the Dexter Trailer Hub and Drum for 8,000-lb E-Z Lube Axles - 12-1/4" Diameter - 8 on 6-1/2 # 8-285-11 is compatible with 16" wheels. Just make sure the specs match up to your current setup. view full answer...
For your 1st question, yes the Dexter Nev-R-Adjust Electric Trailer Brakes # 23-464-465 are going to fit the 5 bolt mounting flange on your 7,000lb axle for your 2020 Grand Design Solitude 380FL.
For your 2nd question, yes the Trailer Hub and Drum Assembly # LC53UD will include the grease seal like you see in the pics. I have sent an update to have this corrected.
And finally for your 3rd question both these parts are going to be compatible with each other. These parts do conform to... view full answer...
Hey Darryl!
Yes, the 3.5K Trailer Hub and Drum Assembly # AKHD-5475-35-K is compatible with the Bearing Buddy Bearing Protectors - Model 1980A # BB1980A (or part # BB1980A-SS for stainless steel). view full answer...
Hey Ronald, thanks for reaching out!
The correct replacement EZ Lube hub and drum assembly for your Shur Trac Trailer is the Easy Grease Trailer Hub and Drum Assembly for 3.5K Axles # AKHD-545-35-EZ-K.
Our fitguide is geared more towards vehicles and we've been slowly dipping our toes into the RV side of things. Unfortunately, this means standard trailers are kind of left in the dust when it comes to replacement parts, but that's because they tend to use more universal parts. Hopefully... view full answer...
Hey Jeff, so if your trailer has a single 3,500 lb axle what you'd want for a replacement brake assembly set would be the part # AKEBRK-35-SA for a self adjusting set that includes an assembly for the left and right hand side.
Then for a hub/drum it's going to be most likely the part # AKHD-545-35-G-EZ-K which has a 5 on 4-1/2 inch bolt pattern for the wheels but you may have a different bolt pattern. I attached a link to all of the 3,500 lb axle hub drums we offer where you can select... view full answer...
Hey Wesley,
Based on the numbers you provided you'll need the Dexter Trailer Hub and Drum Assembly # 8-201-9UC3-EZ you were already looking at would be a correct fit. This comes already pre greased so you won't have to pack the bearings, but I recommend throwing a can of hi-temp bearing grease # L11380 in the compartment with the hub to lube the spindle prior to swapping out the hubs. view full answer...