The 2 most cost-effective roof rack options for the TS Rails, like what come with the Elevate Rack System # TX24NV for your 2022 Ford Maverick, are the following kits:
65" HD Bars - # Y01-140B-NT
65" Vortex Aero Bars - # Y02-500B-NT
The HD bar kit uses bigger bars and I only recommend using them if you plan on carrying things like lumber and bigger cargo that doesn't require a specific rack. If the goal is to carry some kayaks, bikes, or something like a cargo box then you need the Vortex... view full answer...
To install Timbrens on your FWD 2022 Ford Maverick you'll have to go with the Timbren Active Off-Road Bumpstops # T85MR as the Kit # T25MR you're looking at isn't designed to fit your truck. Timbren markets the Off-Road bumpstops as being more forgiving which isn't a bad thing considering Timbren kits tend to be a bit more harsh when it comes to unloaded performance.
For something that gives you a bit more flexibility in performance I recommend using the Air Lift 1000 Air Helper Springs... view full answer...
While I do not see any reason connecting the Hopkins Backup Sensor System # HM60100VA to the factory tow package wiring on your 2023 Ford Maverick would not work, this is something you will want to test first. You can see the power and ground terminals on the 7-way connector in the image below. This will allow you to connect to the terminals in the connector to test the connection and ensure it will not confuse your Maverick into thinking a trailer is connected. view full answer...
I have an alternate option for you, but the Yakima BoatLoader EVO Telescoping Load Assist # Y04085 is only designed to work with Yakima roundbar's or corebar's, which is not what your Elevate truck rack would have.
Instead you would want to use the Inno Kayak Lifter Load Assist # INA453 which has a more universal clamp-on design. It will work with round, square, aero, elliptical, and most factory crossbars. You just need a crossbar spread between 27" - 39" and crossbars that do not measure... view full answer...
Thanks for reaching out!
For your application I recommend checking out the Kuat Transfer V2 Bike Rack for 1 Bike # KU64FR. This is a platform style rack that secures bikes by the wheel and can accommodate up to 60 lbs bikes with a standard 3" wide tire.
I'm not sure if this is low enough for you to completely lower the tailgate on your Ford Maverick but I can say that when it's in the travel position from the center of the hitch pin hole to the top of the wheel tray measures 11-1/8" but... view full answer...
There is an adapter that will allow you to use your Ready Brute Elite tow bar with a Roadmaster base plate kit. It is the Roadmaster Tow Bar Adapter item # RM-032. However, you will need to use the Roadmaster Crossbar-Style Base Plate Kit item # RM37RR on your Maverick.
The item # RM97RR does not work with the adapter you'll have to use.
I have linked a review video below. view full answer...
Yes, it will. The TS Rails for TruXedo Elevate Rack System item # TH25FR are compatible with the BAKFlip MX4 Hard item # BAK52RV that is confirmed to fit both the 2022 and 2023 Ford Maverick.
With the TS Rails installed you will be able to mount the Yakima OverHaul HD Adjustable Truck Bed Ladder Rack item # Y01151-5755. view full answer...
Yes, there is indeed a Curt trailer hitch receiver that fits your 2022 Ford Maverick, as well as a 4-way wiring harness, which are the following part numbers:
- Curt Trailer Hitch Receiver # C84BR
- T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # TK53VR
The # C84BR does not require any drilling whatsoever on your '22 Maverick, it is a complete bolt-on install. view full answer...
Yes, we have the Curt Trailer Hitch Receiver # C84BR which is confirmed to fit your 2024 Ford Maverick. This will provide you with a 2" receiver.
We also have the Curt 4-Way # C59496 which will allow you to connect to most small utility trailers and boat trailers. It will also allow you to use Auxiliary Lights # C53201 should you carry a hitch mounted accessory which impairs the view of your tail lights. The Mounting Bracket # C58001 will allow you to secure the 4-way at the end of the... view full answer...
As you are using the Roadmaster StowMaster Tow Bar # RM-501 you will need the Roadmaster Crossbar-Style Base Plate Kit # RM37RR. The Roadmaster Direct-Connect Base Plate Kit # RM97RR that you found will only work with a direct connect set of tow bars like the Roadmaster Falcon All Terrain, Non-Binding Tow Bar # RM-522 that stays mounted to the motorhome.
You will need a Roadmaster Battery Charge Line Kit # RM-156-25 to maintain the battery voltage when towing as it will be drained. Please... view full answer...
Rhino Rack has a couple of kits specifically designed for fitting the tracks of a RetraxPro XR Tonneau Cover.
For 71" crossbars you will want the Rhino-Rack Vortex Crossbars for Retrax XR item # RRVA180B-RRRLT600
For 65" crossbars you will want the Rhino-Rack Vortex Crossbars for Retrax XR item # RRVA165B-RRRLT600
The Rhino-Rack Roof Rack for Thule and Yakima Tracks item # Y01-140B-NT does not fit the t-slots of the RetraxOne XR. view full answer...
Yes, there is a roof rack that will fit your 2023 Ford Maverick. This mounts directly to the side of your roof without drilling and is perfect for a bike rack or cargo carrier. You will want the roof rack by Rhino Rack and it includes the following parts:
Rhino-Rack Vortex Aero Crossbars - Aluminum - Black - 54" Long - Qty 2 item # RRVA137B-2
Rhino-Rack 2500 Series Legs for Vortex Aero Crossbars - Naked Roofs Qty 4 item # RRRLKVA
Custom DK Fit Kit for 4 Rhino-Rack 2500 Series Roof Rack... view full answer...
Welcome back! It looks like you have the Brake Buddy Select 3 Portable Supplemental Braking System item # HM39524. To replace all of the wiring you will want the following parts:
Replacement Dash Mount Connector for Brake Buddy Classic and Select item # HM39342
Replacement Breakaway System for Brake Buddy Classic and Select item # HM39340
BrakeBuddy Towed Vehicle Battery Charge Kit item # BB54FR
I see you already have the etrailer SD Non-Binding Tow Bar item # e74ZR. For a compatible... view full answer...
We actually already have some confirmed base plate kits for your 2022 Ford Maverick Hybrid! For a complete flat towing setup you will need a base plate kit, tow bar, safety cables, vehicle tow bar wiring, a supplemental braking system, and possibly a high-low adapter. I recommend the following:
Roadmaster Direct-Connect Base Plate Kit - # RM97RR
Roadmaster Nighthawk All Terrain Tow Bar - # RM-676 (comes with safety cables and some wiring)
Towing Combo Kit - # RM-9284-2 (comes with the... view full answer...
It sure does, yes; I verified directly with the manufacturer that the Curt hitch does fit your 2023 Ford Maverick. The correct part number for your truck is the following:
- Curt Trailer Hitch Receiver # C84BR
The # C84BR is a complete bolt-on installation so you do not have to do any drilling into your Maverick's frame to install it. The only other thing you will need if you plan on doing some towing is a 4-flat wiring harness, the T-One Vehicle Wiring Harness # TK53VR. view full answer...
Yes, you can swap out the Blue Ox compatible Clevis's on your Roadmaster Blackhawk 2 All Terrain Tow Bar with the Replacement Swivel Collar for Roadmaster Tow Bars # RM-9200-6 when you want to tow your vehicle with the Roadmaster Direct-Connect Base Plate Kit # RM97RR installed on it. view full answer...
While we do not have a kit we do have every part you will need. I saw you were looking at a hub and drum item # AKHD-545-35-EZ-K that has a 5 on 4-1/2 bolt pattern. If this isn't the pattern currently on your wheels then go ahead and email me back with what you have so you don't need to swap out your wheels.
Another piece of information that is extremely important is the bearing sizes currently on your trailer. The item # AKHD-545-35-EZ-K is compatible with trailer's that use inner bearing... view full answer...
Yes, the Blue Ox Patriot # BLU37TR would be compatible with your 2023 Ford Maverick. You'll need to install a 12v outlet # RM-9332 in order to power the unit while towing. At this time we don't currently carry NSA's line of tow bars but I do highly recommend our etrailer SD Non-Binding Tow Bar for Roadmaster Direct-Connect Base Plates # e74ZR.
This tow bar comes with a lot of features at a very competitive price making it one of the best options on the market. The head and shank are adjustable... view full answer...
The Blue Ox Patriot Portable Braking System - Proportional # BLU37TR is compatible with hybrid vehicles. You can set this system into hybrid mode by following the steps listed below:
1. With the brake plugged in and turned on, use the remote to access the “FORCE” adjustment screen.
2. Use left button to lower the Force setting all the way past 0 until you see “H” for Hybrid mode.
3. Press “OK” Button.
This supplemental braking system offers precise, responsive braking in a system... view full answer...
If you're wanting to have both a tonneau cover and ladder for your 2023 Ford Maverick then you'll need the RetraxONE XR Hard Tonneau Cover # RTX83QR for the cover. This comes with accessory t-slots that specific ladder racks, like the Yakima OverHaul HD Adjustable Truck Bed Ladder Rack for Tonneau Cover # Y01151-5755, can slide into to mount. I've attached a short video below where Evangeline will show you this rack in a similar model tonneau cover and go over some specs and features of... view full answer...