The correct replacement for your discontinued Power Gear 523432 slide out motor is the Replacement PowerGear RV Above Floor Slide-Out Motor # LC368417. view full answer...
The correct replacement tarp for the Extang FullTilt Tonneau Cover with Snaps on your short bed 2003 Ford F-250 is part # EX5720 on our site. I have confirmed this with Extang directly. view full answer...
If you are looking for replacement hardware to go from the frame brackets to the fifth wheel rails you would want the Replacement Hardware Kit part # RP58504.
If you are looking for the replacement hardware kit for the Reese Quick-Install Custom Bracket Kit # RP50082 that you referenced to the frame of your vehicle you would want part # 50082F. view full answer...
It sounds like you're looking for the clamps to attach a Pace Edwards Switchblade to a 2011 Ford F-350; the correct replacement clamps are available with the Replacement Rail Clamps for Pace Edwards Retractable Hard Tonneau Cover # PE54CV. These are the clamps used in the Pace Edwards Switchblade Retractable Hard Tonneau Cover - Aluminum and Vinyl - Black # 311-SWF6985 (6-3/4 foot bed) or # 311-SWF7084 (8 foot bed), which are confirmed to fit on a 2011 Ford F-350. view full answer...
If you just need the passenger side which for your trailer is the follow leg, then use # LC178652. If you want to replace both legs use # LC178653 for the driver's side. If you want to replace everything, I recommend the Lippert Electric Landing Gear Set - Weld On - 37" Lift - 6,000 lbs # LC333964. view full answer...
If you already have tthe B&W Turnoverball Underbed Gooseneck Trailer Hitch w/ Custom Installation Kit - 30,000 lbs # BWGNRK1108 which is the correct fit for your 2000 Ford F-350 then you will need to check out the instructions for the bolt you are seeking. I've attached a photo of the first page to assist. view full answer...
Yes, if you already have the B&W Turnoverball Underbed Gooseneck Trailer Hitch part # BWGNRC800 you can purchase just the B&W Turnoverball Gooseneck Custom Installation Kit for Ford part # BWGNRM1111 which would then give you the B&W Turnoverball Underbed Gooseneck Trailer Hitch part # BWGNRK1111. view full answer...
The 2004 and 2012 Ford F-350s both use the same Edge InSight monitors, # EP84130 or # EP84030, and they both plug into the OBD II port on either truck and the OBD II ports are the same on both trucks. But if you are missing the cable then you would need a new one.
For the old Edge InSight CS and CTS monitors the replacement cable is # H00001700.
For the new Edge InSight CS2 and CTS2 monitors (with HDMI input in the back) use # H00008000. view full answer...
For replacement black line protectors on the Firestone Coil-Rite Air Helper Springs # F4135 you can use the Replacement Thermal Sleeve # F2135820899.
The Replacement Thermal Sleeve # F2135820899 states that it is for the Firestone Ride-Rite Air Spring Kits, but both the Ride-Rite and the Coil-Rite use 1/4" line. So the sleeve will also fit on the Coil-Rite air line. view full answer...
The roller tube assembly and awning for your Dometic brand awning can be replaced with the Solera 20' White Fade RV Awning Roller and Fabric (Std) # LCV000211523. This is a customer favorite, but there are many other colors available, so I've linked that page as well as a help article to assist. view full answer...
I spoke with our resident tire and wheel expert and he confirmed that the metal Bolt-on valve stem you will want is part # AM20906. It is intended for wheels that have a .625 diameter hole in the wheel for the valve stem. view full answer...
I do have replacement parts for you but I called Lippert and they said that there is not an upgrade kit for any of the Coach Steps. Therefore, you can either replace the damaged components or upgrade the steps entirely to the new Lippert Kwikee 32 Series Electric Step part # LC372261. If not the replacement parts you need are as follows:
Motor - part # LC301695
Controller - part # LC301702
Gear Plate - part # LC301696 view full answer...
The Reese Quick-Install Custom Base Rails and Installation Kit for 5th Wheel Trailer Hitches # RP50026-58 is a confirmed fit for your 2012 Ford Super Duty Truck. The rails do not come with pins to secure the hitch to the rails as the pins normally come with the hitch. If you need replacement pins, you can use # 6014. view full answer...
The replacement you're looking for for your Extang FullTilt SL Soft Tonneau Cover part # EX38720 is the Replacement Cover for Extang FullTilt SL Vinyl Tonneau Cover part # EX37720. This one is for the 6 3/4' model versus the 8' model you ordered previously. view full answer...
The Bulldog Collar-Lok Adjustable Channel Mount Coupler part # BD028657 uses 5/8" diameter hex head bolts with a grade 5 rating. If you need these, we have the 3 Position Channel and 5 Position Channel Bolt and Nut Kit part # 337B9020 which will work fine. view full answer...
To add spacers to your Timbren system you are correct when you said you need longer bolts. The kit you're referencing uses a M10 x 30 x 1.5 GR 8.8 bolt to mount to the frame. So you need a bolt that is the same thread pitch, and hardness, but longer, the same as the size spacer you want to use.
Since metric bolts use mm for length, there is a little bit of conversion. Roughly each inch will be 25mm. So for example, if you wanted a 1 inch spacer, you'll want to get a M10 x 55 x 1.5 GR 8.8... view full answer...
You do not need to replace your axle. If you have brake flanges on your current axle, then you can simply add the brake assemblies, hub/drum assemblies, and wiring and be good to go. The 3,500 lb axles are all the same spindle measurements so I recommend the following parts:
Electric Trailer Brake Kit - Self-Adjusting - 10" - Left and Right Hand Assemblies # AKEBRK-35-SA
Mounting Hardware for 10" Brake Assemblies # BRKH10B
Deka Heat Shrink Butt Connector - 12-10 Gauge - Nylon Insulation... view full answer...
Yes, the Replacement Load Stops for Thule Aeroblade Load Bars, Ladder Racks, or Thule TracRac CapRac # 753-3761 will fit on your older model Thule Xsporter. Just for future reference, the only difference between the older Xsporter and the Thule Xsporter Pro # TH500XT is how the height adjustments are made on the rack (knobs vs a pull pin system). These load stops come in a pack of 4 and will replace your original load stops perfectly. view full answer...
If you are having problems with the 7-Way and/or 4-Pole connectors on your 2003 Ford F-350 making good, solid connections with your trailer then I would first start off by checking to make sure that they are both clean and free of any corrosion or debris.
If cleaning them doesn't work and you are simply needing to replace the connectors then I recommend replacing them with the Curt T-Connector Vehicle Wiring Harness for Factory Tow Package - 7-Way & 4 Pole Trailer Connector # C55774 which... view full answer...