I have the perfect option for you. If you like the Equal-i-zer Weight Distribution System part # EQ37100ET which is a great choice as it is one of the best, if not the best system on the market then you will need to order two separate parts, the Equal-i-zer Weight Distribution System part # EQ37101ET and the Equal-i-zer Weight Distribution Shank part # EQ90-02-4900. This will give you the Equal-i-zer Weight Distribution System with 2-1/2" shank and is the only option to do so. view full answer...
Since what you are looking for isn't possible I have a different option that is similar that I think you would really like. You'd want to go with the Rhino Rack Pioneer Platform Tray confirmed to fit your 2017 Ford F-250 crew cab with part # JB0733 and then use the front bar and side railing kit part # RR43160B to provide a front bar option for it.
Another option would be the bar kit # RR43138B mounted to the part # JB0733. view full answer...
The Demco Hijacker Autoslide 5th Wheel Hitch part # DM8550024 is my recommendation for a 2018 Ford F-250 (6-3/4 Foot Bed with OEM Prep Pkg). The main feature that sets this hitch apart from the rest is the auto-slide mechanism which moves the hitch head back when making tight turn. Therefore, there is no getting in and out of the truck each time you need to make a sharp turn which is really a game changer for short bed trucks. Aside from this, it's a quality well made option which nice... view full answer...
While it's possible you'd be totally fine we do have to recommend you run the power wire for the Air Lift Wireless Compressor Kit part # AL74000EZ up to the battery of the vehicle since that's what the instructions state to do. Since it's a 15 amp power circuit I think it would most likely be fine using the 12 volt accessory circuit of the 7-way since normally that circuit is protected by a 40 amp fuse though. view full answer...
The Timbren kit # TFR250SDJ does not require a mounting plate above the axle as it is designed to contact the round the plate that is currently on the axle that is mounted below the spring pack. I would recommend sticking with this kit even though you have the heavy duty tow package. Going with a heavier duty kit would create a harsher ride quality. view full answer...
The Yakima OnRamp Bike Rack for 2 Electric Bikes # Y36FR has a rise of 8" but we do have some shorter options for you.
If you e-bikes have no front fenders then the Kuat NV 2.0 Base # BA22B only has a 3-1/2" shank rise, but if your bikes have short fenders you can use the Saris SuperClamp EX Bike Rack # SA4025F which has a 5" shank rise. These 2 racks have 60 lb bike weight ratings.
Attached are some review videos for you to check out. If you can give me some more information on what... view full answer...
We do have larger quick disconnects for like 2 gauge wire like the Spectro Stackable Quick Connect # SWC60015-8. They do make these in larger sizes like this but without knowing exactly what size you have now it's harder to say for sure what would be larger. view full answer...
Yes, you can use the Trailair Air Ride 5th Wheel Pin Box part # LC158778 with the Demco Hijacker Autoslide 5th Wheel Trailer Hitch like part # DM8550034. However, you will want a new capture plate, the Demco Hijacker Autoslide Capture Plates for Trailair Rota-Flex Pin Boxes part # DM6171. The capture plate that comes with the Demco Hijacker Autoslide 5th Wheel Trailer Hitch will work with the Trailair Air Ride 5th Wheel Pin Box but the Demco Hijacker Autoslide Capture Plates for Trailair... view full answer...
Yes, we do have B and W Companion hitches that fit your 2020 Ford F-250 with the factory rail kit with the part # BWRVK3300 for if you have a long bed truck since it's a fixed hitch. Or if you have a short bed truck you'd want the slider hitch version part # BWRVK3370. Slider hitches are needed to provide additional turning clearance between the cab of the truck and the nose of the trailer since that distance is shorter on short bed trucks. view full answer...
The Brophy D-Ring Anchor # RR2K referenced in your question does indeed have a safe working load limit (WLL) of 265 pounds. Its maximum load (break strength) is 800 pounds but when choosing the correct anchors you will need to go by its working load limit. You will just need to make sure that the combined working load limit for the amount of anchors you use meet or exceed the weight of your Polaris PZR.
If these won't be sufficient for the weight of your Polaris then we do have similar... view full answer...
For a standard 7-way connector that fits your 2010 Ford F-250 we have the Pollak part # PK11893 which would work really well. Or if you wanted a 4-way connector as well you'd want the part # HM40975. If you need the round connector behind the 7-way as well you'd need the part # PK11998 too. view full answer...
We have just what you need.
For your Curt Adjustable 2-Ball Mount - 2-1/2" Hitch - 6" Drop, 5-1/4" Rise - 20K # C45902 you will need the Curt Lock Set for Adjustable Channel-Style Mounts # C23556 which was made specifically for this ball mount and will be plenty stable at 20000lbs.
I included videos of the products mentioned for you to take a look at. view full answer...
Pin weight distribution actually doesn't change when using the Andersen Ultimate # AM3200 in the offset forward or rear position. The pin weight is still squarely on the two fifth wheel rails which do not change in either configuration so it will be exact same. view full answer...
The air bag kit I recommend for your 2000 Ford F-250 is the Firestone Ride-Rite Air Helper Springs # F2550 because they are compatible with your Curt gooseneck hitch and they are more durable than other air bags due to the double-convoluted constructions and the rolled crimp seal that connects the air bags to the end plates.
I usually recommend picking up an air compressor kit with air bags as well since it gives you the ability to monitor and adjust your air bags on the go. The Air Lift... view full answer...
You can store your travel trailer parked on an incline for storage, and it does not have to be perfectly level; you wouldn't want to use leveling blocks as the trailer would slide. On a big incline I highly recommend using heavy-duty rubber chocks behind the tire, and a wheel chock and lock in front.
What this does is give you protection from the tire moving in two different spots, and here is what I would use in this situation:
- Buyers Products 10" Wheel Chock # 337WC1086UWH
- Trimax... view full answer...
The Timbren Suspension Enhancement System # TFR250SDJ will be best for your 2019 Ford F-250 super duty towing your 5th wheel. The other Kit # TFRTT350J is their severe service springs which are designed to always be loaded. This works best on trucks outfitted with slide in campers, service beds or salt spreaders that will always reside in the bed. Using this kit on an unloaded truck will result in a less than desirable ride. view full answer...
I have a set up that will work great for your 2017 Ford F-250 to haul 4 white water kayaks.
For a roof rack for your truck I recommend the following components:
-Yakima HD Crossbars # Y01158
-BaseLine Towers for Yakima Crossbars # Y28TR
-HD Bar SL Adapter for Yakima BaseLine, SkyLine, TimberLine, and RidgeLine Towers # Y03541
-BaseClip Fit Kit for Yakima BaseLine Roof Rack # Y06185
To get your 4 kayaks strapped down safe and sound, I recommend the Rhino-Rack Nautic Stack Kayak Carrier... view full answer...
I only recommend using TorkLift Tie-Downs as they are the only ones that mount to the frame both on the front and rear of your 2015 Ford F-250 Super Duty. You want to know that the slide in camper is secure to your truck when you are driving down the road.
There are different mounts available based on what bed length you have and if you have a factory or aftermarket receiver. I will list the most popular options and if you have something different please let me know so that I can advise... view full answer...
The Reese Elite Series Underbed Rail Adapter for Standard 5th Wheel Trailer Hitches # RP30156 you mentioned will work perfectly with the Curt A16 5th Wheel Trailer Hitch w/ R16 Slider - Dual Jaw - 16,000 lbs # C16521 you were looking at since the # RP30156 installs the the OEM Prep Package in your 2020 Ford F-250 and gives you industry standard above bed rails.
I included videos for each of the products mentioned for you to take a look at. view full answer...
I assume you are referring to a 2-5/16" trailer hitch ball as there is not currently a 2-5/8" hitch ball on the market that I am aware of. If it turns out that you do have a 2-5/16" hitch ball then you can use the HitchGrip Carrying Tool for Weight Distribution Head Assembly part # 303-HG-712 which is the only carrier of its kind that we currently offer. If you have an Equal-i-zer Weight Distribution then it would have most likely came with a 2-5/16" hitch ball. view full answer...
Go To Results