Thread pitch is moot because the matching nuts are included. The parts break down for the hardware included in the universal kit is in the instructions which I have linked for you.
If your truck is a SuperCrew model the Universal installation kit # RP30035 is not a fit. There are custom kits available for a short or long bed. You can use Curt custom kit # C16437-104. I have linked its instructions as well. The brackets in the custom kit are custom designed to fit your truck so there is... view full answer...
There is some hardware in kit # RP50087-58 that comes with the rails and some of the hardware that comes with the frame brackets. The -58 in the part number indicates that it comes with the rails.
If you only ordered # RP50087 (I did not see an order for this when I checked) then you would not get the rail hardware, which is # RP58430, and only get the bracket hardware. The hardware that comes with just the bracket kit can still be used to attach the rails to the brackets if you already... view full answer...
The Replacement Anchor Plates for B&W Biker Bar Motorcycle Tie-Down Systems part # BWMC2305 does not come with the mounting hardware needed for installation. As you mentioned you can pick them up at your local hardware store. I recommend using grade 5 or greater. view full answer...
The two halves of Bulldog Winch Quick Connects # BDW20133 are interchangeable as long as you follow the labeled positive and negative. You will need two sets, and you will use one half for the winch, one for the front of the truck, one for the back and one for the trailer for a total of 2 sets.
If you want the wiring kits then use # BDW20207 for the rear and # BDW20205 for the front.
For install details and some product demonstration videos, click the provided links. view full answer...
The Replacement Side Rails of Tailgate Section for Extang Trifecta 2.0 Tonneau Cover item # EX92540-58 you referenced comes with two side rails and hinges. One for the driver's side and one for the passenger side. view full answer...
The AC adapter that comes with LED Light Strip Kit # DG52688 does indeed plug into a standard grounded outlet (up to 240 volts). The output of it would be 12 volts which I think is where the confusion is. view full answer...
Yes, the Cipa Custom Fit Towing Mirror, # 11602, passenger side, and # 11601, driver side, come with a protective soft strip that goes between the wedge and the factory mirror to protect the factory mirror from getting scratched. I have made a video for you showing the strip.
These mirrors are designed to fit the 2000 Ford F-150 models that have contour mirrors. If you are not sure of the mirrors you have, take a look at the product page for the Cipa mirrors and scroll down. You will see... view full answer...
The Bauer Products T-Handle Lock for Small Truck Caps # BA97VR comes with the locking T-handle and key, 1 nut, 1 spacer, and the metal latch piece. This handle has a 5/16" square shaft so you would need the corresponding nut and spacer. For a latch, we do have the Universal Cam for T-Handle or L-Handle - 2" # 37210925. This measures 2" long and fits most square shaft operating handles. view full answer...
The Better Bath RV Kitchen Sink # LC385314 is just the sink and would require you to source mounting clips from your local hardware store. I recommend also using some caulk on the lip of the sink if you plan on undermounting the sink to provide a bit of extra mounting strength. view full answer...
The Pace Edwards Switchblade Retractable Hard Tonneau Cover - Aluminum and Vinyl - Black # 311-SWFA06A29, which fits on your 2020 Ford F-150, weighs about 70-lbs, so it's effect on the payload is minimal. The installation/removal process is also relatively easy because of the lighter weight for a retractable cover and should take about 10 mins. view full answer...
Mud flap set # WT110002-120002 is both the front and rear sets combined into one part number. The dash in the middle separates the front and rear numbers but if you ordered this you would get all 4 mud flaps. To see a typical installation of the actual mud flaps take a look at the video I have linked. I have also linked the instructions for you. The main picture is just a typical photo. view full answer...
The Tekonsha P3 Brake Controller # 90195 comes with a universal wiring harness. It has a plug on one end that will plug into the rear of the brake controller and the other end of the harness will have 4 wire leads that would have to be hardwired to your 2010 Ford F-150 Super Crew.
If you order the Tekonsha Brake Controller with Wiring # 90195, this part will be the P3 brake controller with the Tekonsha Ford F-150 Wiring Adapter # 22292. This will give you the wiring adapter that will plug... view full answer...
All vehicles now have the passenger's side mirror as a convex mirror which is why that warning is on them. The towing mirror set # LVT-2300-C uses flat glass which is the same as the driver's side stock mirror. When placed next to each other some people think that the flat glass in the towing mirror is magnifying things when actually it is the stock mirror's convex glass that is distorting the image.
I have linked a video review of these mirrors for you. view full answer...
Trailer tail light # STL42RB has reflective properties but I recommend # STL43RBX. The mounting ring around this light is a reflective lens rather than just a black ring like with # STL42RB. I also recommend wiring harness # A47PB to plug into the back of the light. view full answer...
I'm assuming you're speaking of the Truxedo Truxsport, part # TX277601. The aluminum clamps and all needed installation hardware is indeed included with the tonneau cover. view full answer...
Trailer Hub and Drum Assembly # AKHD-545-35-K is sold in quantities of 1. It can be used as a right or a left assembly so if you do need to replace 2 of them you would need to change the quantity to 2 before adding them to your cart. I have included a link to a video on this assembly for you. view full answer...
The Thule # TH903202 EasyFold XT bike rack won't require an additional hitch lock, as the shank that slides into the hitch on the vehicle features an integral locking knob that serves to tighten up the shank/hitch connection so the rack doesn't move around in the hitch. The cradles that hold the bike frame are also lockable, and all the locks are keyed alike so you won't need multiple keys.
I've linked to a product demonstration video for the EasyFold bike rack, and have provided a photo... view full answer...
The Derale Transmission Line Compression Fitting Kit, part # D13031, will include the 3/8 inch NPT hose barb fitting with adapter, the compression sleeve, and the female thread connector for the 5/16 inch transmission line. It is just one universal transmission line fitting to connect a 5/16 inch transmission line to a 3/8 inch NPT fitting. view full answer...
The Equal-i-zer Weight Distribution System # EQ37140ET that you referenced does come with a shank and a 2-5/16" hitch ball so you will not have to purchase anything else for your towing setup. The only other thing that you may want to get is a 1-7/8" thin walled socket like part # EQ70-00-4800 to help make installing the hitch ball easier.
You will want to make sure that the Total Tongue Weight (TTW) of your towing setup fall in the middle of the Tongue Weight (TW) range of this Weight... view full answer...