Expert Answers about Ford F-150
- Recommended Brake Controller Wiring Adapter for Prodigy P2 in 2016 Ford F-150
- The correct Tekonsha brake controller wiring adapter for your 2016 Ford F-150 is part # 22292. The linked video shows where it plugs in on your truck to allow installation of your Prodigy P2 brake controller # 90885.
The wiring adapter you referenced, part # 3020-P, is for Dodge trucks.
view full answer... - Are Replacement Lenses Available for the Reflect-O-Lite 710-750
- I may have a solution for you to replace your tail lights, but it doesn't appear that we have any replacement light lenses for your Reflect-O-Lite 710-750. However, you could use the LED Trailer Tail Light with License Bracket - Stop, Turn, Tail, License - Red Lens - Driver Side # 328-003-81LM1 and Passenger Side # 328-003-81M1 to replace your old lights with entirely new lights and know that if something breaks again that there are replacement parts for. This light is 8-11/16" long x 5-1/2"...
view full answer... - Battery Charger Recommendation to Keep Battery of Truck Topped Off in Storage
- The NOCO Genius charger part # 329-GENIUS2 that you referenced would perfectly for this. It is a 2 amp charger that once the battery is fully charged will switch to a lighter charge to maintain it when stored so that when you need to use the truck it is ready to go.
view full answer... - High-Capacity Hitch for 2012 Ford F-150 SuperCab EcoBoost with Factory Tow Package
- The hitches offered for any given vehicle are rated based on the capacity of the vehicle's frame structure and other features. The vehicle maker will determine the tongue weight (TW) and gross towing weight (GTW) ratings and hitch makers design their hitches for that vehicle to more or less match what the vehicle can do. Bolting a 10K hitch onto a 5K-rated vehicle results in a 5K rating for the entire system.
We do offer a high-capacity TorkLift hitch for your truck, part # TLF1005H, that...
view full answer... - License Plate Backup Camera Recommendation for 2012 Ford F-150
- We haven't had the best luck with the Hopkins backup camera # HM60195VA so even if it didn't come with backup sensors it would not be my best recommendation. Instead I would highly recommend the Rear View Safety part # RVS-778718N. This is much more reliable, gives a much better image, and the monitor is built into the rear view mirror so it looks a lot better and also doesn't tempt thieves.
view full answer... - Is There Any Suspension Enhancement That Will Work With Lowering Kit On a 2021 Ford F-150?
- All of our suspension components including the Air Lift LoadLifter 5000 Air Helper Springs # AL47PD for your 2021 F-150 are designed to fit the truck at its stock ride height. While there are some spacers which allow you to use certain products on a lifted trucks there is no way to bolt on anything we carry for your lowered truck.
A Weight Distribution Hitch # EQ37100ET can be used to help distribute the rear tongue weight more evenly across your F-150. While this will likely not eliminate...
view full answer... - Availability of Tan Husky Liner Floor Mats for Rear of 2008 Ford F-150 Super Crew Cab
- The rear set of tan Husky floor mats you will need for your 2008 Ford F-150 Super Crew Cab are the Husky Liners Rear Floor Mats, part # HL63683. These floor mats are a single piece floor mat that will cover the hump or center aisle of your backseat floor area.
These rear floor liners will match the Husky Liners Front Floor Mats, part # HL33653, that you have referenced.
I am including a link to the instructions for the Husky liner floor mats.
view full answer... - Gunwale Style Kayak Carrier for Yakima Round Bars
- I recommend the Malone BigFoot Pro gunwale-style carrier # MPG112MD for use on your round Yakima roof rack bars. The BigFoot Pro features tall bases made of molded nylon for durability and corrosion resistance and it includes both load straps and bow/stern tie downs. Its 165-lb weight rating means it's good for kayaks and also for canoes. The similar Thule Portage Canoe Carrier # TH819 also fits your round bars but it has a slightly lower weight rating than the Malone.
view full answer... - Trailer Towing Mirrors for 2018 Ford F-150
- The K-Source Custom Extendable Towing Mirror # KS61186F are a fit only for F-150 model years 2009 thru 2012 so they will not fit on your 2018. At this time we do not have a similar replacement towing mirror for your truck but we do have snap-on mirror sets like # KS81850 and others shown on the linked page.
K-Source kit # KS81850 is a pair of two mirrors that install easily without tools as shown in the linked video.
view full answer... - Availability of Class IV Hitch for 2006 Ford F-150 XLT with Factory Hitch
- The Draw-Tite Class IV hitch you referenced, part # 41933, does fit only the 2006 F-150 without the factory hitch. You can check your hitch to see if it was bolted into place or welded. If it was bolted to the truck's frame then you can remove it in order to allow installation of the Draw-Tite # 41933.
If it was welded on then you do not have a simple option for upgrading to a Class IV hitch. If you wish to advise the brand and part number on the factory hitch I can contact the manufacturer...
view full answer... - Demco Air Force One Second Vehicle Supplemental Braking System For 2021 Ford F-150
- Demco SBS Second Vehicle Kit for Air Force One Supplemental Braking System Item # SM99209.
I've attached a video for you as well to help with installation.
view full answer... - Phoenix USA QuickTrim Ring Cover for 15 inch Wheel Availability
- We have just what you need as part # QT655CLO which fits 15 inch wheels and matches the part number you referenced. The part # QT6556CLO you also referenced is not correct as it fits a larger diameter wheel than you have.
view full answer... - Availability Of Mud Flaps For A 2013 Ford F-150
- While the Husky Liners HL58451-HL59451 are currently unavailable, I do show that they would be a fit for a 2013 Ford F-150 with fender flares.
Right now what we have available for your vehicle are the WeatherTech Mud Flaps. We have # WT120003 for the rear, and # WT110003 for the front.
view full answer... - How To Select The Correct Slide Out Bed Tray Length For a 2018 Ford F-150 Limited?
- The Truck Trolley Truck Bed Slide Out Tray # TR87VR has an overall length of 62-1/2" so it will fit either both the 5-1/2', and 6-1/2' bed lengths. For an 8' bed you would want the Tray # TR99VR as it will include an Extension Kit # TR59VR.
Personally I much prefer the BedSlide Sliding Truck Bed Tray w/ T-Tracks options as they build the trays to fit the bed sizes rather than having a universal kit like the Truck Trolley above.
5-1/2' Bed # BE63WR
6-1/2' Bed # BE35WR
8' Bed # BE82WR
view full answer... - Does the K-Source Custom Extendable Towing Mirror for the 2006 Ford F150 Have Powered Fold-In Option
- The K-Source Custom Extendable Towing Mirror, # KS61218F has all the great features of electric/heat with turn signal, puddle lamp, powered mirror face adjustment but not the powered fold-in feature. We do not currently have a model available with a powered fold-in option.
view full answer... - Availability of Gooseneck Hitch for 2023 Ford F-150 Hybrid
- We do have a gooseneck hitch for your 2023 Ford F-150 Hybrid. I spoke with my contact at B&W and confirmed that the # BW77FR fits the 2023 model, including the hybrid.
In addition to the hitch you will also need the Curt 5th Wheel/Gooseneck Custom Wiring Harness # C57008. This plugs in-line with your factory 7-way and will provide you with a connector in your bed to hookup your trailer wiring.
view full answer... - Brophy Stake Pocket Mounted Camper Tie Downs Quantity
- The Brophy Stake Pocket Mounted Camper Tie Downs # TDSF are not available in a quantity of two; they are only sold as a quantity of four.
view full answer... - Is there a Sidewinder Available to Replace the Current 5th Wheel King Pin on My Oakland Bigfoot
- Since Sidewinder couplers are custom designed to replace the standard king pins on trailers, we'll need the part number of the pin box currently on the trailer to determine if there is a Sidewinder that will work for your 1992 Oakland Bigfoot. Most king pins will have the pinbox number listed on a sticker or it will be stamped on the king pin itself. If it's not there or has worn off, you will need to call the trailer manufacturer with your VIN or serial number to have them provide the...
view full answer... - The Best 5th Wheel Trailer Hitch Installation Kit for a 2006 Ford F-150 with 5-1/2 Foot Bed
- Yes, there are custom 5th wheel installation kits that will fit your 2006 Ford F-150 with the 5-1/2 foot bed. You can use Reese kit # RP50081-58 or # RP56006-53. The rails included with these kits will accept Curt, Draw-Tite, Hidden Hitch, Husky, Reese, Pro Series, and Valley 5th-wheel hitches that fit in above the bed rails.
Since your truck has a 5-1/2 foot bed in order to tow a 5th wheel trailer and not hit the trailer and truck together when turning you will need to use a Sidewinder...
view full answer... - Does Front Hitch # 31038 Fit 2003 Ford F-150
- The Curt front hitch part # 31038 that you referenced is the correct hitch for your 2003 Ford F-150. This does fit the previous generation F-150 that started in 1999. The picture of your truck is zoomed in pretty far so I am not able to tell for sure if you maybe are looking at the wrong part of your truck frame to install this on but it does recess a bit underneath the vehicle.
view full answer...
Go To Results