Yes, the Brophy Slide In Camper Tie-Downs # HSAB will fit a dually. They simply require your truck to have at least 2" between its sidewall and lip of the bed rail, and you can't have a drop-in bed liner, aftermarket bed rails, double-walled bed, or side-step bed. view full answer...
Hi Tim,
Really appreciate all that info, and with that I checked directly with our manufacturer, TorkLift, for you. And we do have frame-mounted camper tie-downs that fit your 1991 Dodge Ram D250 without running boards/steps and with an aftermarket hitch. Just keep in mind these are ONLY a fit if your D250 has an 8 foot long bed, and if you have the Regular Cab or Extended Cab. Should your truck meet the latter requirements then here's the correct fits:
- Front: TorkLift Camper Tie-Downs... view full answer...
Hey Jerry,
The Hopkins EasyLift Truck Bed Tailgate Lift Assist # 74211 is a universal-fit item that requires permanently modifying the tailgate by drilling into it so you can install it on your 2020 Ford F-150 view full answer...
Hey Eddie,
Yes, the T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # 118344 is designed to plug inline with your factory tail light wiring and would transfer your light signals through the 4-pole connector, allowing you to bypass the 7-way.
The distinction between flareside and non-flareside models in our fitguide is simply for the compatibility with installing a 7-way inside the bed of the truck. view full answer...
Hey Chip, so we do have a set of Torklift camper tie downs that fit your 2024 Ford F-350 long bed with side steps and a factory hitch with the part number # TL87CR for the front set and part # TLF3008 for the rear set. view full answer...
TorkLift does not currently carry any rear tie downs for your 2022 Ram 2500 that will work with the factory or aftermarket rear steps. This is due to the position of the steps and how they extend out. I do see you are looking at the Front Tie-Down # TLD2142 which fits models with a running board/step that extends under the front of the bed and the Rear Tie-Down # TLD3113 designed to fit with a factory hitch.
Be sure to use the TorkLift Turnbuckles # TLS9529-2-LK with these for securing... view full answer...
Hey Mike. Installation and fitment of the BedSlide Sliding Truck Bed Tray # BE36WR is based on the factory truck bed. Fitment can depend on the exact type of liner, but generally the liner will need to be removed in order to install a BedSlide Tray. view full answer...
Hey Darrel, thanks for reaching out!
Each bed mat has it's own way of remaining in the bed so it will vary. The DeeZee Custom-Fit Truck Bed Mat # DZ86882 you're looking at is a custom fit design and uses the weight of the mat as well as rubber cleats on the bottom to help keep it from shifting around too much.
If you wanted to keep this from moving at all you would need to either add an adhesive underneath it or you'd have to anchor it to your bed another way. view full answer...
The Erickson Over-The-Cab Truck Bed Ladder Rack # EM07707 does not have a difference in bed styles since it will work with both the 6 1/2' and 8' bed models of the 2023 Ram 2500. view full answer...
Hey Steve, so Rightline does have a truck bed tent that fits your 2019 Chevy Colorado 5 foot bed with the part # RL110766 but the tent you mentioned does not fit. view full answer...
The weight is 20 lbs for the BedRug XLT Truck Bed Mat # XLTBMT19SBS that fits your 2024 Ram 1500 with a 6-1/2 foot bed.
The 3/4 inch thick mat is indeed the thickest you can get for your truck, so it's going to offer the most materia and best cushioning and resistance for your truck bed. view full answer...
Yes, the HitchMate TireStep Adjustable Step # HE4040 will indeed fit the tires on your 2019 Ford Ranger 4x4 pick up. The step will fit virtually any tire up to 12-1/2" wide. The largest tire that the 2019 Ranger will fit is a 275/45-R21 which is about 10.8" wide. So, this step will work regardless of what size tires are on your truck. view full answer...
Hey there Cindy, thanks for the question and I think you meant tonneau cover instead of Tahoe? If so, the tonneau cover will need to be rolled up, of course, and so long as it is the Rightline Truck Bed Tent # RL110765 will fit your 2017 Toyota Tacoma with a 5-1/2 foot bed. view full answer...
Hello Jim. The TruXedo TonneauMate Truck Bed Toolbox # TX1117416-59 is only a fit for the 2010 - 2021 short bed Tundra. So, this will not be a fit for your truck. We do have some great toolbox options for the 2023 Toyota Tundra Short bed, but nothing that will be Tonneau compatible like the TonneauMate Toolbox.
I would have to recommend a side mount style box for the short bed Tundra. Something like the UWS Truck Tool Box # UWS78YR. This is a 48-3/4" long x 14-3/8" wide x 11-3/4" tall... view full answer...
Yes, it is! I checked with BAK Industries and the BAK Revolver X4s Hard Tonneau Cover item # BAK62VR you were looking at is compatible with the BAKBox 2 Collapsible Truck Bed Toolbox item # BAK92120.
I can confirm that both of these parts will fit the 2020 Chevrolet Silverado 1500 with the 5-3/4' bed length. Additionally, the tool box works with the 6-1/2' and 8' bed lengths. view full answer...
Hi Mirco,
The Curt Truck Bed Extender # C57WR is a universal fit for most full size trucks, but we haven't had a Hilux in to actually test it's compatibility since it's not available in the United States. If your Hilux has a 2" trailer hitch receiver then you could go with the Malone Axis Truck Bed and Roof Load Extender # MPG907. This would give you a resting point for larger items to sit on along with mounting points to secure the load. view full answer...
If you're asking about the Access Custom Truck Bed Mat # A45BG it fits the 6' bed. The Westin # W35XV does not fit the Frontier. I have attached a link below which takes you to all of our available bed mats for the 2024 Nissan Frontier. At the top you can select vehicle style and choose your bed length to see what fits. view full answer...
Hey Greg, you actually will be able to use the same Rear Tie Downs # TLF3008 for both the 2022 F-350 and the 2024 F-450. You will need to get some new Front Tie Downs for the 2024 though, since the front tie downs form the 2022 will not carry over. The correct Front Tie Downs for the 2024 Ford F-450 Super Duty with a factory hitch and no steps are as follows:
TorkLift Camper Tie-Downs - Custom Frame Mount - Front # TL87CR view full answer...
Yes, the DeeZee Custom-Fit Truck Bed Mat # DZ87012 will fit in the 8' bed of your 2024 Ford F-250. DeeZee has verifed it to fit in a 2023 model year which is unchanged to your 2024. view full answer...
Hey Bob, so at this time there isn't a Black Armour bed mat that fits your 2022 Ford F-250 short bed that we can get but we have the very similar Westin mat part # 50-6405 that would work great. view full answer...