The 7- and 4-Pole Trailer Connector Socket # HM40975 is designed to connect directly to the USCAR connector which is found on several vehicles. We do have the Plug Adapter # PK11933 which will connect to the factory tow package wiring found on your 2004 Dodge Ram if the wiring is not there. If you do not have the tow package and are wiring the truck for this connector you will need the Universal Wiring Harness # C56229. view full answer...
The Dexter Trailer Hub and Drum Assembly # 84556UC3 is a single Hub and Drum assembly. We do not offer them sold in pairs, so you would need to purchase 2 individually if you're going to replace the parts on an entire axle. I've linked the installation video for this product to this answer.
You could also go with the # AKHD-550-35-K , which is a more economical Hub and Drum assembly. If you also need a brake recommendation for your trailer, the # AKEBRK-35L and # AKEBRK-35R is a great... view full answer...
Yes, 2 fishwire are included to help install the 1/2" bolts for the etrailer.com Trailer Hitch # E98845 on your 2016 Dodge Journey.
Attached is a sample installation video and the written instructions for you to check out. If you let me know what you will be using the trailer hitch for I can make additional recommendations if necessary. view full answer...
The Fold-Down Gooseneck Trailer Hitch with Installation Kit, # 8339-4438, comes with the hitch, the installation kit, and the hardware needed to install it in the following trucks.
2003 - 2005 Dodge Ram Pickup 6 Foot Bed, 1500 Series
2006 - 2008 Dodge Ram Pickup 6 Foot Bed, 1500 Series, except Mega Cab
2003 - 2008 Dodge Ram Pickup 8 Foot Bed, 1500 Series
I have included a link to the installation details for you to review. Basically, you would install the rails first. The rails in this... view full answer...
The Ultra-Fab Ultra Scissor Jacks # UF48-979031 that you referenced is a quantity of 2 of the Ultra-Fab Ultra Scissor Jack # UF48-979032.
So its the same jack, but one part number you get a pair of them and the other part number you get just one. view full answer...
I spoke with my contact at Westin to be sure and he did say that the ends of the Platinum Series Oval Nerf Bars, # 24-54080, do have end caps. These particular bars are Westins commercial grade bars if you were to go by their application guide. view full answer...
On the Putco PURE Premium LED Dome-Light Kit, part # P980015, for your 2010 Dodge Charger SXT, it has 2 bulbs that fit in front map lights and 2 bulbs that fit in the dome lights. The 578 bulb part number is the factory part number I show for both the map light and the dome light on a 2010 Dodge Charger.
The best way to verify the bulb size is check your owners manual or remove one of the bulbs from your vehicle and the part number will be stamped on the bulb. view full answer...
Yes, the 5th Airborne Sidewinder, part # RP61422 comes with a variable, universal wedge that fits Draw-Tite, Hidden Hitch, Reese, Husky, Owens, and Valley.
At the bottom of the product page, it shows how to orient the wedge depending on which model you have. Since you have a Reese, it will be either variation 1 or 2. view full answer...
The latch mechanism of the Gen-Y Pegasus Shock Absorbing Gooseneck Coupler # 325-GH-7007 that you referenced is the pin style and not the older auto-latch system that it used to have. view full answer...
Yes, the Westin Platinum Series Oval Nerf Bars # 21-2315 comes with all the included hardware for a quick and easy bolt-on installation to your 2005 Dodge Ram 1500 quad cab. view full answer...
The Rear View Safety Rear View Mirror with Monitor for Dodge Vehicles # RVS-718-DODGE does not have a microphone that can be used with Dodge UConnect.
This mirror is compatible with Dodge Ram models from 2013-2018.
I have added a link to the installation manual for you to check out. view full answer...
I contacted our representative at Westin, and he informed me that the item you selected, Westin Oval Tube Steps, part # 22-5000 are the correct tube steps for your vehicle.
He also said that you will need the Westin Custom Installation Mounting Kit for Oval Tube Steps, part # 22-1895 to install part # 22-5000 on your 2010 Dodge Ram 1500 SLT regular cab. view full answer...
So the reason the part # D15660 is the most expensive is because it comes with everything needed to install as a engine oil cooler kit since it has multiple fittings as well as the sandwich adapter. This is basically the complete kit.
Next up is the # D15960 which setup to be a transmission cooler and comes with the fittings needed for this application which is considerably less than as an engine oil cooler.
Finally the # D15860 comes with minimal fittings and adapters and would require... view full answer...
The Prodigy P3 Brake Controller part # 90195 that you referenced comes with both install brackets you referenced. To see what all comes with this product when you order it see the attached picture.
The only other part you will need to install this controller in your 2010 Dodge Ram would be the brake controller install harness part # 3021-P. view full answer...
Actually the Brake Install kit part # ETBC7 does not include a brake controller. It includes basically everything else you would need to install one on a vehicle that has a 4-way.
If you have a 4-way and a brake controller already all you would need is the # ETBC7 and you would get everything needed. If you still need a 4-way you would want the # C55504.
I attached an install video and instructions for the # ETBC7 for you to check out as well. view full answer...
On the replacement plastic dome assembly, # BVA0502-03, the foam gasket is included. I have included a picture showing it. The foam is not really a gasket, it is a strip of foam adhered to the dome. You can see in the picture where the two ends of the strip come together. The foam is not available by itself. view full answer...
The felt covered wedge that comes with the Cipa Tow Mirrors part # CM10500 that you referenced is what matches the shape of the mirrors of your vehicle and holds tension in the mirror so that it doesn't slip off. The felt attaches to the wedge to prevent scratching of the mirrors.
The replacement wedges for these mirrors is part # CM10503. view full answer...
To get the Bumper and mounting kit for your Dakota you will need to select between the Westin Diamondstep Replacement Bumper with Custom Install Kit, item # 63000-97800, for 1987-1996 Dodge Dakota and the Westin Diamondstep Replacement Bumper with Custom Install Kit, item # 63000-93800, for 1997-2004 Dodge Dakota, depending on the year of your vehicle. These bumpers include the mounting kit for an easy no drill installation.
The Westin Diamondstep Replacement Step Bumper, Black Powder... view full answer...
Yes, the DeeZee tube steps, # DZ16121-16335, comes with the custom installation brackets and hardware designed to fit your 2011 Ram. I have included a link to the installation instructions for you to view. view full answer...
The Westin HDX Headache Rack - Black Powder Coated Steel # 57-8035 only includes the hardware needed to mount the rack to the bedrails of your 2005 Dodge RAM pickup. If you have an oversized toolbox (wider than 70") Westin does have alternative brackets # 57-8095 to accommodate larger toolboxes. view full answer...