The Solera XL RV Window Awning Fabric and Roller, # LCV000369589 pairs with XL support arms # LCV000334764 that are sold separately to create a window awning for your RV. This fits windows 54" to 59" wide and 32" or taller.
The awning arm, # LCV000334764 connects to the awning, # LCV000369589 and then mounts to the RV with button head screws. view full answer...
Yes, the Quick Roof Repair Tape for RV Roofs # QR44FR is suitable for use on the top exposed portion on your RV awning.
This material is flexible enough to be wrapped around the curved portion on your awning. view full answer...
To install the Solera 18V Power RV Awning - 16' Wide - Rechargeable Battery - White Fade item # LC730492 you just need 69" of open space on the RV wall. Then it needs to be clear from the awning rail straight down so that the wall-mounted brackets for the awning arms can be installed. You will also need a minimum clearance of 2-1/2" between the awning rail and the top of the slider.
To attach the awning fabric to the RV you will need the Solera Awning Rail Extrusion - White - 8' Long item... view full answer...
You do not need to drill holes and fish wire into the RV to use the Solera 18V Power RV Awning, # LC729486. That is one of the great features of this, you get a powered awning without needing to do all that invasive labor to your RV and creating potential water leak points. There is a waterproof toggle switch located at base of awning arm. There is also a manual override that lets you operate the awning if needed, but the rechargeable battery is estimated to operate 22-25 times between... view full answer...
Some widths of the Solera 12V XL Power RV Awning have multiple colors available, but the only color that is currently offered for the 20 foot wide Solera 12V XL Power RV Awning - Extra-Long 9'8" Projection # LCV000334969-362243 is Black Fade (the difference is that White Fade transitions from dark to light closer to the RV while Black Fade transitions from light to dark).
There isn't a particular room this awning fits, it only requires you to have 4-1/2" between the awning rail and top... view full answer...
The Solera 12V Power RV Awning Conversion Kit # LC434724 will attach at the brackets you have in place for your Dometic awning. The Replacement 11' Wide Roller w/ Fabric for Solera RV Awnings # LCV000223153 works with 11' awning assemblies which is measured from center of arm to center of arm. This means your Solera 12V Power RV Awning Conversion Kit # LC434724 should measure 11' from center of arm to center of arm.
The Replacement 11' Wide Roller w/ Fabric for Solera RV Awnings # LCV000223153... view full answer...
The Solera 20' Sand Fade w/ Black Weather Guard RV Awning (Std) # LCV000231498 will work very nicely with the Solera Family Room # LC362235. I've attached the instructions in photo form to assist with the installation. view full answer...
When deciding if it's best to go with a larger arm for your awning, you'll need to go by the actual awning/fabric extension instead of arm length.
As long as that's good, you can use larger awning arm kits like the:
-Solera Classic Universal Awning Support Arms for RVs # LC434718 for white,
Or,
-The Solera Classic Universal Awning Support Arms for RVs # LC434717 for black.
However, if your awning when extended out measures less than 116", then the Solera 12V Power RV Awning Conversion... view full answer...
To attach the Solera Family Room for 19' Wide RV Awnings # LC362234 to your awning, first you'll install the included brackets to your RV, under the awning rail. Then you'll attach straps over the roll tube and attach the polycord of the screen room into the roll tube.
I have attached a link below to the instructions of the # LC362234 which you can take a look at as well. view full answer...
Yes you could use the Solera 12V Power RV Awning Conversion Kit part # LC434724 to convert your A and E two step awning to a powered electric awning. view full answer...
Yes, you will utilize your existing roller tube and fabric off of your current awning.
The Solera 12V Power RV Awning Conversion Kit # LC434724 includes everything you need to convert your manual awning, including the switch, motor and hardware. view full answer...
Yes you would need to remove the Valterra Hanger Tabs for RV Awnings # A77041 before you could roll the awning up. Otherwise your awning would try to roll up over the hangers which wouldn't work out. view full answer...
The length of an awning such as the Solera 12V XL Power RV Awning - 12' Wide part # LCV000334919-362241 is measured from the center of each arm so that's pretty much your arm spacing. That said, you don't have to mount the awning arms to studs, they are supported at the top via the RV's framing so studs are not really needed. view full answer...
That's going to be subjective; The RV Awning UV Protectant and Conditioner # BE85FR is supposed to be able to cover awnings of all sizes, but if you're pretty liberal with your spraying, and have a huge awning, then you might not be able to cover the entire thing.
They do not specify a size of awning that this bottle can cover, however there have been numerous reviews of different people using this on awnings of all sizes big and small. view full answer...
If you have a Dometic setup on your RV currently then the Solera 12V Power RV Awning Conversion Kit # LC434724 you are interested in will fit and work well as a replacement. This was designed to easily replace Dometic setups like yours. While your awning seemingly doesn't attach to any bracing there is bracing behind it where this will attach easily.
I attached a review video for this for you to check out as well. view full answer...
I reached out to my contact at Valterra, and the Rope Light Trak Dual Utility Track for RV Awnings - 18' # A30-0600 along with the Valterra Mini Rope Light for RV Awning Utility Slot - LED # A30-0625VP should be removed after each use before rolling your awning back up. It is possible to roll it into the awning, but it will not give you a smooth roll and may cause damage to the awning or the track. view full answer...
Yes, the Valterra RV Awning Cleaner # V88542 will work to clean away mold on your awning. If the odor is a musty, mildew like odor, then it should disipate once the mold and mildew is cleaned off of the awning and it fully dries out.
1. Start by spot testing a small area of your awning to ensure you won't damage the material. Clear away loose debris and dirt. Then rinse the top and bottom of the awning.
2. Coat the area of mildew or mold with the cleaning solution and use a soft brush... view full answer...
The Solera 12V XL Power RV Awning part # LCV000335015-362241 uses a wired switch for operation, there is no wireless remote avavailbe for this unit. The switch is included with the awning. view full answer...
The great thing about the Solera Awning Conversion Kits like the part # LC434729 that you referenced is that they were designed to basically replace anything out there including your A and E awning. This will easily install and work great on your camper. view full answer...