Good question; the Curt Stabilizing Support Strap # 18050 is recommended by Curt, but is not required when using a bike rack on your 2019 Chevy Impala with the Curt Trailer Hitch Receiver # C12115.
It will not affect the warranty on the Curt hitch if you choose not to use the strap. There was a time when this was the case for the majority of Curt hitches, but that has changed so the straps are no longer required, just recommended. It never hurts to use a strap to optimize stability but... view full answer...
Yes, the Curt Trailer Hitch Receiver - Custom Fit - Class II - 1-1/4" # C12115 is confirmed to fit your 2014 Chevy Impala LT. Keep in mind, this hitch requires the use of stabilizing straps # 18050 for all non-trailer loads.
It is for that reason that I recommend installing the Draw-Tite Trailer Hitch Receiver - Custom Fit - Class II - 1-1/4" # 36538 instead. This does not require the use of stabilizer straps which is more convenient and keeps cost down.
I have attached some installation... view full answer...
When it comes to installing a trailer hitch on your 2015 Chevrolet Impala LT The Curt Trailer Hitch Receiver - Custom Fit - Class II - 1-1/4 inch # C12115 is confirmed for your vehicle. We do not have a 2 inch receiver confirmed for your vehicle.
The Curt Hitch has a tongue weight up to 350 pounds. When it comes to hauling your two electric bikes The Thule EasyFold XT Bike Rack for 2 Electric Bikes - 1-1/4 inch and 2 inch Hitches - Frame Mount # TH903202 will work with the class 2 hitch... view full answer...
The Yakima JetStream roof rack that fits your 2014 Chevy Impala includes the following parts:
50" Yakima JetStream Crossbars - # Y00428
BaseLine Towers - # Y28TR
Front BaseClip - # Y06124
Rear BaseClip - # Y06126
Lock Cores - # Y07204 (optional)
I listed which clip should be in which position above but if I hadn't told you this, you can find these fitments in the instructions or on the Yakima website.
Attached are some videos for you to check out! view full answer...
The Draw-Tite # 36543 would be a fine choice that would work great for you, however I'd personally choose the Curt # C12115 because the hitch itself is manufactured in the USA and its one of the least expensive options. It also has a higher tongue weight capacity at 350 lbs versus 300 lbs for the Draw-Tite.
For wiring, I'd personally choose the # 118590 and I'd go with the Curt # C45017, because it's manufactured domestically instead of overseas. You'll also need a # PC2 hitch... view full answer...
The Thule WingBar Evo system is an excellent roof rack system for your 2009 Chevrolet Impala. The load bars will be level when installed properly on the roof of your vehicle.
The Thule Roof Rack Fit Kit, part # THKIT1531, will include foot pads that are contoured to the roof of your Chevrolet Impala. These foot pads are vehicle specific. See attached picture of the foot pad.
The foot pad and the included mounting brackets attach to the bottom of the Thule Rapid Traverse Foot Pack, part... view full answer...
The Edge Insight CS2, part # EP84030, is not a tuner type of programmer. It can display several parameters and allows you to monitor them but you cannot tune the engine with it. It will not add horsepower, torque, or change any of the factory settings on your 2006 Chevrolet Impala. It can be used with other performance chips to track and monitor your newly tuned engine.
Some of the parameters you can monitor are listed below:
Battery Voltage
Intake Air Temperature (IAT)
Engine Oil Pressure... view full answer...
Your owners manual is the best resource to use when determining towing capacities of your vehicle, see section 4. I found a copy of the owners manual for a 2008 Chevrolet Impala and Chevy states that an Impala can tow a trailer, but the gross trailer weight must not exceed 1,000 lbs. Keep in mind, Chevy gives the Impala a maximum towing capacity of 1,000 lbs assuming the driver is the only additional weight in the vehicle. If there will be additional passengers and cargo in the vehicle,... view full answer...
Without knowing exactly what trailer hitch you have on your 2004 Chevrolet Impala I don't know if it will work on your 2011. However, two out of the three trailer hitches we carry for the 2004 Impala are also compatible with the 2011 Impala, the Draw-Tite Class II Frame Receiver Hitch # 36407 and the Curt Class II Receiver Hitch # C12252. If your hitch is not one of these then it may not fit and you would want to purchase one of the hitches above. Between the two hitches I would suggest... view full answer...
I checked with Thule and the Thule OutWay 3 Bike Carrier # TH56BV that you referenced is confirmed to fit your 2006 Chevy Impala with a spoiler. The rack will actually go over the spoiler as long as it is a factory spoiler.
If you plan on carrying any women's or alternative framed bikes without horizontal top tubes you may also be interested in purchasing a Thule Bike Adapter Bar # TH982XT to provide a horizontal top tube on your bikes to provide an attachment point. I attached a review... view full answer...
You can carry bikes with your 2011 Saab 9-5 but unfortunately there are just no trailer hitches that fit this vehicle, and I did check with the hitch manufacturers just to make sure. So while it's not exactly what you are looking for, a trunk-mounted bike rack is the only option for this car to carry bikes, and the correct fit is the Thule Gateway Pro, which comes in either a 2-bike or 3-bike option:
- 2-Bike: Thule Gateway Pro 2-Bike Rack # TH88VR
- 3-Bike: Thule Gateway Pro 3-Bike Rack... view full answer...
Yes, we do offer roof rack options for a 2003 Chevrolet Impala of which I recommend the SportRack Semi-Custom Roof Rack for Naked Roofs part # SR1002 as it is the most cost effective option. It has a 130 lb weight capacity with clamp-on installation. view full answer...
I called Vision X and they said that there are four 10' long cords and four 20' long cords in regards to the lights on the Vision X Tantrum Strobe Light Kit w/ Remote Control part # HIL-STW. view full answer...
Since the hitches that fit your 2015 Chevy Impala are 1-1/4 inch sized like the Curt # C12115 the best option for an e-bike rack would be the Thule EasyFold XT part # TH903202. This option would also work great for 2 inch hitches but overall this rack is very easy to use and load since it has a ramp built into it. view full answer...
I do have a solution for you, but the Curt Trailer Hitch Receiver # C11433 is not compatible with your 2004 Chevrolet Impala.
For a similar trailer hitch you will want to go with the Draw-Tite part # 36407. This is a Class II hitch with a 1-1/4" receiver opening. It is rated for 3,500 lbs Gross Towing Weight (GTW) and 300 lbs Tongue Weight (TW). You will want to check your owner's manual for any special instructions or weight restrictions as well.
I attached an installation video and... view full answer...
We do have a replacement hardware kit for your Curt Trailer Hitch, part # C12252.
Just enter # RHK in the search box on our website. Then enter C12252 in the Hitch Item Number box. Select Curt From the dropdown box and order the quantity replacement hardware kits you want. Your hardware kit will be assembled for you. It's that easy. view full answer...
The distance between the mounting holes of the Replacement Lens for Optronics ST21RS/ST20RS Series Tail Lights # A20R is exactly 3 inches. view full answer...
The plug-in style trailer wiring harness that I recommend for your 2001 Chevrolet Impala is the Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # C56116. I have attached a link to the installation instructions for you to check out. view full answer...
So the Sportrack Semi-Custom roof rack part # SR1010 isn't a totally custom fit roof rack for any vehicle. Basically Sportrack made this rack to fit as many vehicles as possible which means it doesn't always fit every vehicle perfectly. For that reason I try not to recommend the Sportrack roof racks for anyone as they don't fit well a lot of the time.
The most cost-effective custom roof rack we have for your 2008 Impala is the Rhino Rack part # RRVA126B-2, # RRRLKVA, and # DK187 which... view full answer...
Sportrack has two fitguides for their roof racks. One is an internal spreadsheet with all of the current fits listed and the outdated one they put on their website. What you have found is the outdated fitguide that does not include all of the current fits. The most current and accurate fitguide of theirs shows that the Sportrack # SR1010 does fit your 2015 Chevy Impala so we can recommend it as a fit.
That said, this is a semi-custom roof rack fit which means it's designed to fit as many... view full answer...
Go To Results