The Replacement Front Turnbuckle for HappiJac Original Turnbuckle part # LC182901 is for a single front turnbuckle. If you need a single rear turnbuckle then you'll use the Replacement Rear Turnbuckle for HappiJac Original Turnbuckle part # LC182900 or the HappiJac Original Turnbuckles for Camper Tie-Downs part # LC182898 if you need all four aka a full set. view full answer...
There shouldn't be any factory bolts on the vehicle when installing Curt trailer hitch # 13591. The hitch comes with the six M12-1.75 x 40mm bolts needed for installation (some installations only require 4 of the hex bolts). I have included a link to the installation instructions for you and a video showing an example installation. view full answer...
The Draw-Tite Class II 1-1/4 Inch Hitch, part # 36408, will fit a 2012 Chevrolet Equinox. It is the trailer hitch and pin and clip. To be able to tow with this hitch you will still need to purchase the recommended ball mount, hitch ball and the wiring harness for lighting the trailer lights. I am including links to the installation instructions and a install video of the hitch being installed on a 2010 Equinox (same on the 2012 model).
The wiring harness for your Equinox would be the Curt... view full answer...
Each of the bolts for the Draw-Tite Trailer Hitch # 36408 that fits your 2007 Chevy Equinox are M12 hex bolts.
I strongly recommend using the Replacement Hardware Kit for Trailer Hitches # RHK to get the correct hardware for this hitch.
All you need to do is go to this product page, enter the model number of your hitch in the box that says "Hitch Item Number" and then select the correct manufacturer from the drop-down box. So you'll simply enter "36408" in the "Hitch Item Number" box... view full answer...
The Curt Trailer Hitch has all of the mounting hardware needed for installation on your 2013 Equinox. This is a Class lll hitch and it has a 2 inch receiver opening. I have attached a link to an installation video for this hitch on an Equinox you can check out.
Since you did not say what you plan to use the hitch for I have attached some of the items we offer that will work for you. If you have any questions about a specific item just let me know and I can make some recommendations that... view full answer...
The etrailer Trailer Hitch Receiver # e98865 includes M12 x 1.75 threaded bolts for attaching to the weldnuts in the frame of your 2010 Chevrolet Equinox.
Be sure to use a Nylon Brush # 814092 to ensure the threads are clear of any shavings before installing the bolts after you chase the threads. view full answer...
Yes, the etrailer 2-inch Class III hitch # e98865 that fits your 2017 Chevrolet Equinox includes all of the hardware needed to mount it to your vehicle. No drilling is required.
The linked written instructions provide step-by-step guidance and a list of the tools needed and the video I included for you shows you the whole process. A helpful article is included too.
If you need 4-pole wiring for a trailer or accessory items, you can use part # 118264 if you have the factory tow package... view full answer...
The Curt Class III Receiver Hitch, part # 13591, includes all necessary installation hardware. The 2010 and 2011 model year of the Equinox use the same hitches.
If you were planning on using the hitch for towing purposes, we offer some additional products that you might need such as a ball mount, part # C45010, the wiring harness to provide lighting functions to the trailer part # 118494, a 2 inch trailer ball, part # 19247, or a 1-7/8 inch ball, part # 19260.
I will include a link to... view full answer...
The etrailer Trailer Hitch # e98865 that fits your 2013 Chevy Equinox actually comes with a fish wire tool among the parts so you will not need any additional pieces. view full answer...
The 4-way trailer wiring harness does not come with the etrailer hitch that fits your 2022 Chevy Equinox, so you would need to get that separately. For the hitch and harness that fits your Equinox you will need the following:
- etrailer Trailer Hitch Receiver # e59ZR
- Vehicle Wiring Harness # C94FR view full answer...
Yes. Custom fit trailer hitch # e98865 includes all of the necessary hardware for installation on your 2014 Chevy Equinox. I have included links to the instructions and a video showing an example installation for you.
If you plan on doing some towing I recommend etrailer ball mount kit # 989900. It comes with 2 ball mounts; one with a 3/4 inch rise or 2 inch drop and one with a 2-3/4 inch rise or 4 inch drop. It also includes a 1-7/8 inch ball, 2 inch ball, hitch pin with clip, and a storage... view full answer...